41 research outputs found

    Factor VIII haplotypes frequencies in Tunisian hemophiliacs A

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The development of inhibitors against factor 8 (F8) is the most serious complication of replacement therapy with F8 in children with severe hemophilia. It was suggested that mismatched F8 replacement therapy may be a risk factor for the development of anti-factor F8 alloantibodies. Recently four single nucleotide polymorphisms (SNPs) encoding six distinct haplotypes, designated H1 through H6, were studied in different populations. Two SNPs are components of the A2 and C2 immunodominant-inhibitor epitopes.</p> <p>The aim of this study is to determine the different types of haplotypes in relation with inhibitors developments and their frequencies in our Tunisian hemophiliac population.</p> <p>Materials and methods</p> <p>95/116 Tunisian patients with hemophilia A undergoing treatment at Hemophilia Treatment Center, Aziza Othmana hospital, participate in this study. Among them only six patients develop inhibitors. The four SNPs were amplified and sequenced.</p> <p>Results and Discussion</p> <p>In a total of 77 patients, we identified the H1, H2, H3 and the infrequent H5 haplotypes. The H1 and H2 haplotypes, which have the same amino acid sequence in the recombinant F8 molecules used clinically, are the most represented with the frequency of 0.763 and 0.157 respectively. This distribution is almost similar to that of Caucasians in which the frequencies are respectively 0.926 and 0.074, whereas it is 0.354 and 0.374 among Subsaharians. Four patients with inhibitors studied here have the H1 haplotype. For one patient who has a large deletion including the exon 10 we can't identify his haplotype. Theses frequencies may explain partially the low level of inhibitors in our patients.</p

    Noise modeling and calibration of the measuring depth of cameras Time-of-Flight

    No full text
    Avec l'apparition récente des caméras 3D, des perspectives nouvelles pour différentes applications de l'interprétation de scène se sont ouvertes. Cependant, ces caméras ont des limites qui affectent la précision de leurs mesures. En particulier pour les caméras Temps-de-Vol, deux types d'erreur peuvent être distingués : le bruit statistique de la caméra et la distorsion de la mesure de profondeur. Dans les travaux de la littérature des caméras Temps-de-Vol, le bruit est peu étudié et les modèles de distorsion de la mesure de profondeur sont généralement difficiles à mettre en œuvre et ne garantissent pas la précision requise pour certaines applications. L'objectif de cette thèse est donc d'étudier, modéliser et proposer un étalonnage précis et facile à mettre en œuvre de ces 2 types d'erreur des caméras Temps-de-Vol. Pour la modélisation du bruit comme pour la distorsion de la mesure de profondeur, deux solutions sont proposées présentant chacune une solution à un problème différent. La première vise à fournir un modèle précis alors que le second favorise la simplicité de la mise en œuvre. Ainsi, pour le bruit, alors que la majorité des modèles reposent uniquement sur l'information d'amplitude, nous proposons un premier modèle qui intègre aussi la position du pixel dans l'image. Pour encore une meilleure précision, nous proposons un modèle où l'amplitude est remplacée par la profondeur de l'objet et le temps d'intégration. S'agissant de la distorsion de la mesure de profondeur, nous proposons une première solution basée sur un modèle non-paramétrique garantissant une meilleure précision. Ensuite, pour fournir une solution plus facile à mettre en œuvre que la précédente et que celles de l'état de l'art, nous nous basons sur la connaissance à priori de la géométrie planaire de la scène observée.3D cameras open new possibilities in different fields such as 3D reconstruction, Augmented Reality and video-surveillance since they provide depth information at high frame-rates. However, they have limitations that affect the accuracy of their measures. In particular for TOF cameras, two types of error can be distinguished : the stochastic camera noise and the depth distortion. In state of the art of TOF cameras, the noise is not well studied and the depth distortion models are difficult to use and don't guarantee the accuracy required for some applications. The objective of this thesis is to study, to model and to propose a calibration method of these two errors of TOF cameras which is accurate and easy to set up. Both for the noise and for the depth distortion, two solutions are proposed. Each of them gives a solution for a different problem. The former aims to obtain an accurate model. The latter, promotes the simplicity of the set up. Thereby, for the noise, while the majority of the proposed models are only based on the amplitude information, we propose a first model which integrate also the pixel position in the image. For a better accuracy, we propose a second model where we replace the amplitude by the depth and the integration time. Regarding the depth distortion, we propose a first solution based on a non-parametric model which guarantee a better accuracy. Then, we use the prior knowledge of the planar geometry of the observed scene to provide a solution which is easier to use compared to the previous one and to those of the litterature

    Le système urbain tunisien. Analyse hiérarchique démo-fonctionnelle sur la base de la loi Rang-taille

    No full text
    L’analyse du système urbain tunisien depuis l’indépendance en 1956 montre un système primatial. La primatie de Tunis n’a pas cessé de s’accuser en dépit du recul du poids urbain de la capitale depuis 1956. Cette primatie touche aussi bien la première cité que certaines villes régionales comme Sfax et Kairouan, elle s’explique par la faiblesse de la vie régionale et locale. L’analyse menée sur la base de la loi Rang-taille montre que, souvent, la faiblesse démographique des villes se trouve compensée par leur poids fonctionnel.The Tunisian urban system analysis since independence in 1956 shows a primatial system where the relation between the capital city (Tunis) and second city increases despite the decrease of the urban weight of Tunis since 1956. This primarily affects some regionals cities like Sfax and Kairouan and can be explained by the regional life weakness. The analysis based on the Rank Size Rule shows that the demographic weakness is often compensate by the functional weight

    Les disparités spatiales en Tunisie, état des lieux et enjeux

    No full text
    The increasingly significant insertion of Tunisia into the international division of labor during the last thirty years has resulted in an accentuation of spatial disparities of which littoralization, linked to the growing extroversion of the Tunisian economy, constitutes not the only but certainly the most visible expression. The purpose of this survey is to analyze these spatial disparities, to see the ways in which they combine spatially, and to examine their relationship to social disparities. The survey will be concerne with showing the privileged location of the coast, particularly the eastern one, as pertains to the organization of space and the functioning of the economy. If, on the morrow of independence the confrontation was especially between north and south, independent Tunisia 's evolution has placed the coastal-interior cleavage in the forefront. The relative decline of Tunis, in spite of excessive centralization, has been far more profitable to the coast and particularly to the Sahel and the northeast, than to Tunisia's interior. Economic globalisation, the free-trade agreement signed in 1995 with the European Union, and the stuctural adjustement program adopted in 1996, while conveyeing a new message on these disparities, will intensify them by making from the coast the area of interface, metropolization and anchorage to the world economy.L'insertion, de plus en plus marquée, de la Tunisie dans la division internationale du travail a abouti, au terme de ces trente dernières années, à l'accusation des disparités spatiales dont la littoralisation, liée à l'extraversion croissante de l'économie tunisienne et sans être la seule, constitue l'expression la plus visible. L'objet de cet article est d'analyser ces disparités spatiales, de voir les manières dont elles se combinent spatialement et leur rapport avec les disparités sociales. Il s 'agit de montrer la place privilégiée du littoral, oriental en particulier, dans l'organisation de l'espace et le fonctionnement de l'économie. Si au lendemain de l'Indépendance, l'opposition était surtout nord-sud, l'évolution de la Tunisie a placé le clivage littoral- intérieur au devant et le recul relatif de Tunis, en dépit d'une centralisation excessive, a profité au littoral et plus particulièrement au Sahel et au Nord-Est, beaucoup plus qu'à la Tunisie profonde. La mondialisation de l'économie, l'accord de libre-échange que la Tunisie a signé en 1995 avec l'Union européenne et le programme de mise à niveau, tout en véhiculant un nouveau discours sur ces disparités, vont encore les renforcer en faisant du littoral l'espace d'interface, de métropolisation et d'ancrage à l'économie mondiale.Belhedi Amor. Les disparités spatiales en Tunisie, état des lieux et enjeux. In: Méditerranée, tome 91, 1-2-1999. Littoralisation et disparités spatiales Machrek Maghreb, sous la direction de Marc Côte et Michèle Joannon. pp. 63-72

    The spatial influence of Tunisian cities via the diffusion of innovative multi-site companies

    No full text
    The spatial influence of cities can be apprehended from the way in which innovation diffuses, from the presence of modern and “rare” or out-of-the-ordinary activities, and from the networks formed by companies operating a number of sites. The analysis of these diffusion patterns casts light on the spatial dynamics in Tunisia in recent times, on the explicative models, on the changes occurring in the urban hierarchy, and on the inexorable decline of certain centres in favour of others.This article sets out to analyse the diffusion of innovative, modern and out-of-the-ordinary activities and their business networks between 1997 and 2004. It shows that the spatial diffusion observed is coherent with a hierarchical pattern on national scale, while on regional scale it is proximity that has the greatest influence. Further to this, the city of Sousse appears to be strengthening its position in relation to the second city, Sfax, while the coastal zone continues to be favoured by these processes, prefiguring the Tunisia of tomorrow.Keywords: spatial diffusion, urban hierarchy, proximity, influence, spatial dynamics, urban system, companies network, managemen

    L'inégal développement régional en Tunisie : Accumulation spatiale et littorisation

    No full text
    Belhedi Amor. L'inégal développement régional en Tunisie : Accumulation spatiale et littorisation. In: Cahiers de la Méditerranée, n°49, 1, 1994. La Tunisie, une dynamique de mutation. pp. 133-156

    Les villes intermédiaires en Tunisie. Place et dynamisme

    No full text
    Belhedi Amor. Les villes intermédiaires en Tunisie. Place et dynamisme. In: Cahiers de la Méditerranée, n°50, 1, 1995. Villes intermédiaires en Méditerranée. Tome 1. pp. 81-103

    Les facteurs d'organisation de l'espace national tunisien

    No full text
    Factors of spatial organisation in Tunisia. — Factors of spatial organisation are evidenced by the principal components analysis of 49 variables in 32 homogeneous areas: the first of these factors, which represents 40% of variance, expresses socioeconomic development; the others are state intervention, physical environment and heritage. Evolution between 1956 and 1989 shows the continuity of organisational processes, the ambivalence of state intervention and the growing divide between respective areas.L'espace se trouve organisé en fonction de plusieurs facteurs que l'auteur essaye d'analyser. L'analyse en composantes principales de 49 variables dans 32 zones homogènes permet de découvrir les facteurs d'organisation spatiale dont le premier exprime le développement socio-économique et représente 40% de la variance. L'action de l'État, le milieu et l'héritage représentent les autres facteurs de différenciation. L'évolution entre 1956 et 1989 montre la continuité des processus organisationnels, l'ambiguïté de l'action de l'État et le clivage croissant entre les zones.Belhedi Amor. Les facteurs d'organisation de l'espace national tunisien. In: Espace géographique, tome 22, n°2, 1993. pp. 113-124

    Modélisation du bruit et étalonnage de la mesure de profondeur des caméras Temps-de-Vol

    No full text
    3D cameras open new possibilities in different fields such as 3D reconstruction, Augmented Reality and video-surveillance since they provide depth information at high frame-rates. However, they have limitations that affect the accuracy of their measures. In particular for TOF cameras, two types of error can be distinguished : the stochastic camera noise and the depth distortion. In state of the art of TOF cameras, the noise is not well studied and the depth distortion models are difficult to use and don't guarantee the accuracy required for some applications. The objective of this thesis is to study, to model and to propose a calibration method of these two errors of TOF cameras which is accurate and easy to set up. Both for the noise and for the depth distortion, two solutions are proposed. Each of them gives a solution for a different problem. The former aims to obtain an accurate model. The latter, promotes the simplicity of the set up. Thereby, for the noise, while the majority of the proposed models are only based on the amplitude information, we propose a first model which integrate also the pixel position in the image. For a better accuracy, we propose a second model where we replace the amplitude by the depth and the integration time. Regarding the depth distortion, we propose a first solution based on a non-parametric model which guarantee a better accuracy. Then, we use the prior knowledge of the planar geometry of the observed scene to provide a solution which is easier to use compared to the previous one and to those of the litterature.Avec l'apparition récente des caméras 3D, des perspectives nouvelles pour différentes applications de l'interprétation de scène se sont ouvertes. Cependant, ces caméras ont des limites qui affectent la précision de leurs mesures. En particulier pour les caméras Temps-de-Vol, deux types d'erreur peuvent être distingués : le bruit statistique de la caméra et la distorsion de la mesure de profondeur. Dans les travaux de la littérature des caméras Temps-de-Vol, le bruit est peu étudié et les modèles de distorsion de la mesure de profondeur sont généralement difficiles à mettre en œuvre et ne garantissent pas la précision requise pour certaines applications. L'objectif de cette thèse est donc d'étudier, modéliser et proposer un étalonnage précis et facile à mettre en œuvre de ces 2 types d'erreur des caméras Temps-de-Vol. Pour la modélisation du bruit comme pour la distorsion de la mesure de profondeur, deux solutions sont proposées présentant chacune une solution à un problème différent. La première vise à fournir un modèle précis alors que le second favorise la simplicité de la mise en œuvre. Ainsi, pour le bruit, alors que la majorité des modèles reposent uniquement sur l'information d'amplitude, nous proposons un premier modèle qui intègre aussi la position du pixel dans l'image. Pour encore une meilleure précision, nous proposons un modèle où l'amplitude est remplacée par la profondeur de l'objet et le temps d'intégration. S'agissant de la distorsion de la mesure de profondeur, nous proposons une première solution basée sur un modèle non-paramétrique garantissant une meilleure précision. Ensuite, pour fournir une solution plus facile à mettre en œuvre que la précédente et que celles de l'état de l'art, nous nous basons sur la connaissance à priori de la géométrie planaire de la scène observée

    La dynamique économique régionale en Tunisie. Analyse structurelle-résiduelle

    No full text
    Regional dynamics are expressed through the quantitative evolution and the structural modification of the economic aggregates (indicators), employment or regional occupied population. This paper measures the spatial dynamics of the various economic activities between 1984 and 1994. The Shift-Share-Analysis of the working population between the last two censuses of 1984 and 1994 breaks up the total evolution of a given area, in three components: one due to the initial economic structure of the considered area, one concerns rather the general economic evolution of the country and one which is more specific to the given area and would return to specific factors. The analysis shows, except for some cases, significant structural contents that are expected to increase within the context of globalization, between a dynamic littoral Tunisia which has a favorable structure and an interior having one less favorable structure too
    corecore