318 research outputs found
CMOS Charge amplifier for liquid argon Time Projection Chamber detectors
We developed an integrated circuit (IC) for the readout of LAr (Liquid Argon) TPC (Time Projection Chamber) neutrino detectors. Typical signals are around 3 fC per particle per wire but they can go up to 120fC. They necessitate low noise electronics for the readout. The goal is to achieve 1000e- ENC (Equivalent Noise Charge) with a detector capacitance of 250pF. In order to limit cable capacitances (and therefore the noise), we studied the possibility to install the frontend electronics into the Argon vapours, above the LAr filled volume. Argon is liquid between 83 K and 87 K. A typical temperature around 120K is reached in the Argon vapours. In order to optimize the cost per channel ratio we selected a standard 0.35μ CMOS technology: AMSC35B4
Entre expérimentation, démonstration et transmission : la maquette dans le contexte de la charpenterie traditionnelle au Japon
Au Japon, dans le contexte de la restauration d'édifice la maquette se veut une restitution à l'identique du bâtiment. C'est à dire qu'elle est construite sans clous ni vis, avec des outils à échelle réduite, par des charpentiers qui reproduisent scrupuleusement, en miniature, tous les emboîtements traditionnels. S’il existe plusieurs raisons de la produire durant le chantier, cet article évoque les cas particuliers de la restauration par démontage périodique et de la reconstruction de bâtiments qui permettent d’aborder différentes fonctions de la maquette, et ce à travers trois exemples :- La maquette de 1965 de la porte Suzaku 朱雀門.- La maquette de 2010 du « chantier-école » de la pagode du Jison-In 慈尊院.- La maquette de 2010 du « chantier-école » de la pagode du Yakushiji 薬師寺In Japan, in the context of building restoration, the model is designed to be an exact replica of an existing building. That is to say that it is built without nails or screws, with small-scale tools, by carpenters who scrupulously reproduce, in miniature, all the traditional joints. If there are several reasons for producing it during the construction site, this article will mention the particular cases of restoration by periodic dismantling and reconstruction of buildings that allow us to approach different functions of the model, through three examples:- The 1965 model of the Suzaku Gate 朱雀門.- The 2010 model of the Jison-In 慈尊院 pagoda's training site.- The 2010 model of the Yakushiji 薬師寺 pagoda's training site.In Japan nimmt das Architekturmodell eine entscheidende Bedeutung bei der Restaurierung von Bauten als identisches Abbild der Konstruktion ein. Es wird dabei originalgetreu ohne Nägel und Schrauben, mit verkleinerten Werkzeugen von Zimmerleuten angefertigt, die mit akribischer Genauigkeit alle traditionellen Falzverbindungen des Baus nachbilden. Unterschiedliche Motive liegen diesem Verfahren zugrunde, von denen es in diesem Beitrag um den speziellen Fall der Restaurierung durch zeitweise Demontage mit anschließendem Wiederaufbau des Gebäudes geht, welcher Aufschlüsse auf unterschiedliche Funktionen des Modells erlaubt. Folgende drei Beispiele werden dabei untersucht: das 1965 angefertigte Modell des Tores von Suzaku (朱雀門) sowie die jeweils 2010 entstandenen Modelle der "Lehrbaustellen" der Pagoden des Jison-In (慈尊院) und des Yakushiji (薬師寺)
Underground Neutrino Detectors for Particle and Astroparticle Science: the Giant Liquid Argon Charge Imaging ExpeRiment (GLACIER)
The current focus of the CERN program is the Large Hadron Collider (LHC),
however, CERN is engaged in long baseline neutrino physics with the CNGS
project and supports T2K as recognized CERN RE13, and for good reasons: a
number of observed phenomena in high-energy physics and cosmology lack their
resolution within the Standard Model of particle physics; these puzzles include
the origin of neutrino masses, CP-violation in the leptonic sector, and baryon
asymmetry of the Universe. They will only partially be addressed at LHC. A
positive measurement of would certainly give a
tremendous boost to neutrino physics by opening the possibility to study CP
violation in the lepton sector and the determination of the neutrino mass
hierarchy with upgraded conventional super-beams. These experiments (so called
``Phase II'') require, in addition to an upgraded beam power, next generation
very massive neutrino detectors with excellent energy resolution and high
detection efficiency in a wide neutrino energy range, to cover 1st and 2nd
oscillation maxima, and excellent particle identification and
background suppression. Two generations of large water Cherenkov
detectors at Kamioka (Kamiokande and Super-Kamiokande) have been extremely
successful. And there are good reasons to consider a third generation water
Cherenkov detector with an order of magnitude larger mass than Super-Kamiokande
for both non-accelerator (proton decay, supernovae, ...) and accelerator-based
physics. On the other hand, a very massive underground liquid Argon detector of
about 100 kton could represent a credible alternative for the precision
measurements of ``Phase II'' and aim at significantly new results in neutrino
astroparticle and non-accelerator-based particle physics (e.g. proton decay).Comment: 31 pages, 14 figure
Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/c charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1 ± 0.6 % and 84.1 ± 0.6 %, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation
Deep underground neutrino experiment (DUNE) near detector conceptual design report
The Deep Underground Neutrino Experiment (DUNE) is an international, world-class experiment aimed at exploring fundamental questions about the universe that are at the forefront of astrophysics and particle physics research. DUNE will study questions pertaining to the preponderance of matter over antimatter in the early universe, the dynamics of supernovae, the subtleties of neutrino interaction physics, and a number of beyond the Standard Model topics accessible in a powerful neutrino beam. A critical component of the DUNE physics program involves the study of changes in a powerful beam of neutrinos, i.e., neutrino oscillations, as the neutrinos propagate a long distance. The experiment consists of a near detector, sited close to the source of the beam, and a far detector, sited along the beam at a large distance. This document, the DUNE Near Detector Conceptual Design Report (CDR), describes the design of the DUNE near detector and the science program that drives the design and technology choices. The goals and requirements underlying the design, along with projected performance are given. It serves as a starting point for a more detailed design that will be described in future documents
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, U.S.A. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of 7 × 6 × 7.2 m3. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components
Highly-parallelized simulation of a pixelated LArTPC on a GPU
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on 103 pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Measurements of electrons from νe interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectra is derived, and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50 MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons
Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment
- …