1,566 research outputs found
Complementary Observables for the Determination of |Vub| in Inclusive Semileptonic B Decays
The determination of |Vub| from inclusive semileptonic B decays is limited by
uncertainties in modelling the decay distributions in b->ulnu transitions. The
largest uncertainties arise from the limited knowledge of the appropriate b
quark mass and Fermi momentum to use in the parameterization of the shape
function. This paper presents a new method in which these shape function
parameters are constrained by the same data used to measure |Vub|. The method
requires measurements of the momenta of both the charged lepton and the
neutrino in semileptonic B decays. From these quantities two complementary
observables can be constructed, one for discriminating between b->ulnu
transitions and background and the other for constraining the shape function.
Using this technique the uncertainties in |Vub| from the shape function may be
significantly reduced.Comment: 8 pages, 3 figure
Reacting Flow Prediction of the Low-Swirl Lifted Flame in an Aeronautical Combustor With Angular Air Supply
The development of lean-burn combustion systems is of paramount importance for reducing the pollutant emissions of future aero engine generations. By tilting the burners of an annular combustor in circumferential direction relative to the rotational axis of the engine, the potential of increased combustion stability is opened up due to an enhanced exhaust gas recirculation between adjacent flames. The innovative gas turbine combustor concept, called the Short Helical Combustor (SHC), allows the main reaction zone to be operated at low equivalence ratios. To exploit the higher stability of the fuel-lean combustion, a low-swirl lifted flame is implemented in the staggered SHC burner arrangement. The objective is to reach ultra-low NOx emissions by complete evaporation and extensive premixing of fuel and air upstream of the lean reaction zone.
In the present work, a modeling approach is developed to investigate the characteristics of the lifted flame in an enclosed single-burner configuration, using the gaseous fuel methane. It is demonstrated that by using the Large Eddy Simulation method, the shape and lift-off height of the flame is adequately reproduced by means of the finite-rate chemistry approach.
For the numerical prediction of the lean lifted flame in the SHC arrangement, the focus is on the interaction of adjacent burners. It is shown that the swirling jet flow is deflected towards the sidewall of the staggered combustor dome, which is attributed to the asymmetrical confinement. Since the stabilization mechanism of the low-swirl flame relies on outer recirculation zones, the upstream transport of hot combustion products back to the flame base is studied by the variation of the combustor confinement ratio. It turns out that increasing the combustor size amplifies the exhaust gas recirculation along the sidewall, and increases the temperature of recirculating burned gases. The present study emphasizes the capability of the proposed lean-burn combustor concept for future aero engine applications
Reacting Flow Prediction of the Low-Swirl Lifted Flame in an Aeronautical Combustor With Angular Air Supply
The development of lean-burn combustion systems is of paramount importance for reducing the pollutant emissions of future aero engine generations. By tilting the burners of an annular combustor in circumferential direction relative to the rotational axis of the engine, the potential of increased combustion stability is opened up due to an enhanced exhaust gas recirculation between adjacent flames. The innovative gas turbine combustor concept, called the short helical combustor (SHC), allows the main reaction zone to be operated at low equivalence ratios. To exploit the higher stability of the fuel-lean combustion, a low-swirl lifted flame is implemented in the staggered SHC burner arrangement. The objective is to reach ultralow NOx emissions by complete evaporation and extensive premixing of fuel and air upstream of the lean reaction zone. In this work, a modeling approach is developed to investigate the characteristics of the lifted flame in an enclosed single-burner configuration, using the gaseous fuel methane. It is demonstrated that by using the large eddy simulation method, the shape and liftoff height of the flame are adequately reproduced by means of the finite-rate chemistry approach. For the numerical prediction of the lean lifted flame in the SHC arrangement, the focus is on the interaction of adjacent burners. It is shown that the swirling jet flow is deflected toward the sidewall of the staggered combustor dome, which is attributed to the asymmetrical confinement. Since the stabilization mechanism of the low-swirl flame relies on outer recirculation zones, the upstream transport of hot combustion products back to the flame base is studied by the variation of the combustor confinement ratio. It turns out that increasing the combustor size amplifies the exhaust gas recirculation along the sidewall, and increases the temperature of recirculating burned gases. This study emphasizes the capability of the proposed lean-burn combustor concept for future aero engine applications
Numerical Investigation of the Low-Swirl Flow in an Aeronautical Combustor With Angular Air Supply
Civil air traffic is predicted to further grow in the near future. Hence, the development of aeronautical combustors will face major challenges to meet future stringent environmental regulations. In the present study, an innovative gas turbine combustor with angular air supply called Short Helical Combustor (SHC) is investigated. The main feature of this concept is the helical arrangement of the fuel injectors around the turbine shaft. Aiming at the implementation of a lean-burn concept, a low-swirl lifted flame is adopted. This flame is lifted off and not anchored to the injector which opens the potential of low NOx emissions due to a high degree of premixing within the combustor.
In this work, isothermal flow characteristics of such a generic SHC combustor are studied by use of RANS predictions with special emphasis on the interaction of adjacent low-swirl flows. For evaluating the influence of injector parameters on the flow field, a parametric study based on single sector simulations is performed. It is shown that the asymmetrically confined swirling jet flow is strongly deflected towards the sidewall of the staggered SHC dome. The deflection of the flow is associated with an asymmetric pressure field in the vicinity of the burner which is generally known as Coandă effect. As a consequence of the deflected flow, the angular momentum flux at combustor outlet is increased.
The interaction of the low-swirl jet and the SHC sidewall is investigated with regards to backflow momentum and residence time in the recirculation zone. It is concluded that by modifying the momentum of the air flow through the injector, the amount of recirculating air flowing back along combustor walls is strongly affected. The present work establishes an understanding of the underlying aerodynamics of the SHC concept which is essential for matching the requirements of lean lifted flames
Euler–Lagrangian simulation of the fuel spray of a planar prefilming airblast atomizer
The pollutant emissions of aircraft engines are strongly affected by the fuel injection into the combustion chamber. Hence, the precise description of the fuel spray is required in order to predict these emissions more reliably. The characteristics of a spray is determined during the atomization process, especially during primary breakup in the vicinity of the atomizer nozzle. Currently, Euler-Lagrangian approaches are used to predict the droplet trajectories in combustor simulations along with reaction and pollutant formation models. To be able to reliably predict pollutant emissions in the future, well-defined starting conditions of the liquid fuel droplets close to the atomizer nozzle are necessary. In the present work, Euler-Lagrangian simulations of a generic airblast atomizer are presented. The starting conditions of the droplets are varied in the simulations by means of a primary breakup model, which takes into account the local gas velocity when predicting the droplet diameter. The objective of this work is to determine the optimal parameters of the probability density functions for the starting position and the starting velocity of the droplets. Spray properties observed in the simulations are used to qualitatively evaluate the major effects of the distribution parameters on the spray and the suitability of the primary breakup model being applied. Hence, the spatial distribution of an experimental spray can be reproduced using a statistical model for the droplet starting conditions
"Candidatus Subterrananammoxibiaceae," a New Anammox Bacterial Family in Globally Distributed Marine and Terrestrial Subsurfaces
Bacteria specialized in anaerobic ammonium oxidation (anammox) are widespread in many anoxic habitats and form an important functional guild in the global nitrogen cycle by consuming bio-available nitrogen for energy rather than biomass production. Due to their slow growth rates, cultivation-independent approaches have been used to decipher their diversity across environments. However, their full diversity has not been well recognized. Here, we report a new family of putative anammox bacteria, “Candidatus Subterrananammoxibiaceae,” existing in the globally distributed terrestrial and marine subsurface (groundwater and sediments of estuary, deep-sea, and hadal trenches). We recovered a high-quality metagenome-assembled genome of this family, tentatively named “Candidatus Subterrananammoxibius californiae,” from a California groundwater site. The “Ca. Subterrananammoxibius californiae” genome not only contains genes for all essential components of anammox metabolism (e.g., hydrazine synthase, hydrazine oxidoreductase, nitrite reductase, and nitrite oxidoreductase) but also has the capacity for urea hydrolysis. In an Arctic ridge sediment core where redox zonation is well resolved, “Ca. Subterrananammoxibiaceae” is confined within the nitrate-ammonium transition zone where the anammox rate maximum occurs, providing environmental proof of the anammox activity of this new family. Phylogenetic analysis of nitrite oxidoreductase suggests that a horizontal transfer facilitated the spreading of the nitrite oxidation capacity between anammox bacteria (in the Planctomycetota phylum) and nitrite-oxidizing bacteria from Nitrospirota and Nitrospinota. By recognizing this new anammox family, we propose that all lineages within the “Ca. Brocadiales” order have anammox capacity.publishedVersio
TILLING in the two-rowed barley cultivar 'Barke' reveals preferred sites of functional diversity in the gene HvHox1
<p>Abstract</p> <p>Background</p> <p>The economic importance of cereals such as barley, and the demand for improved yield and quality require a better understanding of the genetic components that modulate biologically and commercially relevant traits. While <it>Arabidopsis thaliana </it>is the premiere model plant system, the spectrum of its traits cannot address all of the fundamental questions of crop plant development. Unlike <it>Arabidopsis</it>, barley is both a crop and a model system for scientific research, and it is increasingly being used for genetic and molecular investigations into the conserved biological processes of cereals. A common challenge in genetic studies in plants with large genomes arises from the very time-consuming work of associating mutant phenotypes with gene sequence information, especially if insertion mutagenesis is not routine, as in barley. Reverse genetics based on chemical mutagenesis represents the best solution to this obstacle.</p> <p>Findings</p> <p>In barley, we generated a new TILLING (Targeting Local Lesions IN Genomes) resource comprising 10,279 M<sub>2 </sub>mutants in the two-rowed malting cultivar 'Barke,' which has been used in the generation of other genomic resources in barley (~150,000 ESTs, DH mapping population). The value of this new resource was tested using selected candidate genes. An average frequency of approximately one mutation per 0.5 Mb was determined by screening ten fragments of six different genes. The ethyl methanesulphonate (EMS)mutagenesis efficiency was studied by recording and relating the mutagenesis-dependent effects found in the three mutant generations (M<sub>1</sub>-M<sub>3</sub>). A detailed analysis was performed for the homeodomain-leucine-zipper (HD-ZIP) gene <it>HvHox1</it>. Thirty-one mutations were identified by screening a 1,270-bp fragment in 7,348 M<sub>2 </sub>lines. Three of the newly identified mutants exhibited either a six-rowed or an <it>intermedium</it>-spike phenotype, and one mutant displayed a significantly altered spikelet morphology compared to that of the 'Barke' wild type. Our results indicate a bias in the frequency of independent functional mutations at specific base pair (bp) positions within the gene <it>HvHox1</it>.</p> <p>Conclusions</p> <p>A new TILLING population was developed as a resource for high-throughput gene discovery in an alternative barley germplasm. Pilot screening demonstrated a similar or even slightly higher mutation frequency when compared to previously published barley TILLING populations that should allow for the identification of diverse allelic variation. Partial phenotypic evaluation of the M<sub>2 </sub>and M<sub>3 </sub>generations has revealed the presence of a wide spectrum of morphological diversity that highlights the great potential of this resource for use in forward genetic screens. Altogether, our study shows the efficiency of screening and the applicability of the new TILLING population for genetic studies in the barley crop model system.</p
Complete genome sequence of Lutibacter profoundi LP1T isolatet from an Arctic deep-sea hydrothermal vent system
Lutibacter profundi LP1T within the family Flavobacteriaceae was isolated from a biofilm growing on the surface of a black smoker chimney at the Loki’s Castle vent field, located on the Arctic Mid-Ocean Ridge. The complete genome of L. profundi LP1T is the first genome to be published within the genus Lutibacter. L. profundi LP1T consists of a single 2,966,978 bp circular chromosome with a GC content of 29.8%. The genome comprises 2,537 protein-coding genes, 40 tRNA species and 2 rRNA operons. The microaerophilic, organotrophic isolate contains genes for all central carbohydrate metabolic pathways. However, genes for the oxidative branch of the pentose-phosphate-pathway, the glyoxylate shunt of the tricarboxylic acid cycle and the ATP citrate lyase for reverse TCA are not present. L. profundi LP1T utilizes starch, sucrose and diverse proteinous carbon sources. In accordance, the genome harbours 130 proteases and 104 carbohydrate-active enzymes, indicating a specialization in degrading organic matter. Among a small arsenal of 24 glycosyl hydrolases, which offer the possibility to hydrolyse diverse poly- and oligosaccharides, a starch utilization cluster was identified. Furthermore, a variety of enzymes may be secreted via T9SS and contribute to the hydrolytic variety of the microorganism. Genes for gliding motility are present, which may enable the bacteria to move within the biofilm. A substantial number of genes encoding for extracellular polysaccharide synthesis pathways, curli fibres and attachment to surfaces could mediate adhesion in the biofilm and may contribute to the biofilm formation. In addition to aerobic respiration, the complete denitrification pathway and genes for sulphide oxidation e.g. sulphide:quinone reductase are present in the genome. sulphide:quinone reductase and denitrification may serve as detoxification systems allowing L. profundi LP1T to thrive in a sulphide and nitrate enriched environment. The information gained from the genome gives a greater insight in the functional role of L. profundi LP1T in the biofilm and its adaption strategy in an extreme environment.publishedVersio
- …