Influence of Pressure and Temperature on X-Ray Induced Photoreduction of Nanocrystalline CuO

The authors are grateful to Prof. Alain Polian for providing NDAC cell. Parts of the present research have been carried out at the ODE beamline at SOLEIL.X-ray absorption spectroscopy at the Cu K-edge is used to study X-ray induced photoreduction of copper oxide to metallic copper. Although no photoreduction has been observed in microcrystalline copper oxide, we have found that the photoreduction kinetics of nanocrystalline CuO depends on the crystallite size, temperature and pressure. The rate of photoreduction increases for smaller nanoparticles but decreases at low temperature and higher pressure.Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Short-range order of compressed amorphous GeSe2

The structure of amorphous GeSe2 (a-GeSe2) has been studied by means of a combination of two-edges X-ray absorption spectroscopy (XAS) and angle-dispersive X-ray diffraction under pressures up to about 30 GPa. Multiple-edge XAS data-analysis of a-GeSe2 at ambient conditions allowed us to reconstruct and compare the first-neighbor distribution function with previous results obtained by neutron diffraction with isotopic substitution. GeSe2 is found to remain amorphous up to the highest pressures attained, and a reversible 1.5 eV red-shift of the Ge K-edge energy indicating metallization, occurs between 10 GPa and 15 GPa. Two compression stages are identified by XAS structure refinement. First, a decrease of the first-neighbor distances up to about 10 GPa, in the same pressure region of a previously observed breakdown of the intermediate-range order. Second, an increase of the Ge-Se distances, bond disorder, and of the coordination number. This stage is related to a reversible non-isostructural transition involving a gradual conversion from tetra- to octa-hedral geometry which is not yet fully completed at 30 GPa

Dynamics of the magnetic and structural a -> e phase transition in Iron

We have studied the high-pressure iron bcc to hcp phase transition by simultaneous X-ray Magnetic Circular Dichroism (XMCD) and X-ray Absorption Spectroscopy (XAS) with an X-ray dispersive spectrometer. The combination of the two techniques allows us to obtain simultaneously information on both the structure and the magnetic state of Iron under pressure. The magnetic and structural transitions simultaneously observed are sharp. Both are of first order in agreement with theoretical prediction. The pressure domain of the transition observed (2.4 $\pm$ 0.2 GPa) is narrower than that usually cited in the literature (8 GPa). Our data indicate that the magnetic transition slightly precedes the structural one, suggesting that the origin of the instability of the bcc phase in iron with increasing pressure is to be attributed to the effect of pressure on magnetism as predicted by spin-polarized full potential total energy calculations

Pressure effects on the magnetic properties of FeCuZr studied by x-ray magnetic circular dichroism: Evidence of weakening of ferromagnetism in FeCuZr alloys

The room temperature changes of the magnetic behavior under pressure of an invar alloy of nominal composition [Fe_(0.5)Cu_(0.5)]_(87)Zr_(13) (at. %) has been studied by K-edge x-ray magnetic circular dichroism (XMCD) and x-ray absorption near edge spectroscopy (XANES). The Curie temperature, as determined from low field magnetization measurements, is (255 ± 15) K. However XMCD shows a non negligible signal above this temperature. In addition, the XMCD signal decreases upon increasing pressure indicating a pressure-induced collapse of the magnetic moment. These results evidence the itinerant character of FeCuZr alloys as well as the occurrence of magnetovolume effects characterized by a strong dependence of the 3d band on the Fe-Fe nearest neighbor distances

Inequivalent routes across the Mott transition in V2O3 explored by X-ray absorption

The changes in the electronic structure of V2O3 across the metal-insulator transition induced by temperature, doping and pressure are identified using high resolution x-ray absorption spectroscopy at the V pre K-edge. Contrary to what has been taken for granted so far, the metallic phase reached under pressure is shown to differ from the one obtained by changing doping or temperature. Using a novel computational scheme, we relate this effect to the role and occupancy of the a1g orbitals. This finding unveils the inequivalence of different routes across the Mott transition in V2O

Magnetic circular dichroism of x-ray absorption spectroscopy at rare-earth L2,3 edges in RE2Fe14B compounds (RE = La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu)

Magnetic circular dichroism (MCD) in the x-ray absorption spectroscopy (XAS) at the L2,3 edges for almost entire series of rare-earth (RE) elements in RE2Fe14B, is studied experimentally and theoretically. By a quantitative comparison of the complicated MCD spectral shapes, we find that (i) the 4f-5d intra-atomic exchange interaction not only induces the spin and orbital polarization of the 5d states, which is vital for the MCD spectra of the electric dipole transition from the 2p core states to the empty 5d conduction band, but also it accompanies a contraction of the radial part of the 5d wave function depending on its spin and orbital state, which results in the enhancement of the 2p-5d dipole matrix element, (ii) there are cases where the spin polarization of the 5d states due to the hybridization with the spin polarized 3d states of surrounding irons plays important roles, and (iii) the electric quadrupole transition from the 2p core states to the magnetic vale! nce 4f states is appreciable at the pre-edge region of the dipole spectrum. Especially, our results evidence that it is important to include the enhancement effect of the dipole matrix element in the correct interpretation of the MCD spectra at the RE L2,3 edges.Comment: 9 pages, 5 figures, 1 table, REVTe

A new internally heated diamond anvil cell system for time-resolved optical and x-ray measurements

We have developed a new internally heated diamond anvil cell (DAC) system for in situ high-pressure and high-temperature x-ray and optical experiments. We have adopted a self-heating W/Re gasket design allowing for both sample confinement and heating. This solution has been seldom used in the past but proved to be very efficient to reduce the size of the heating spot near the sample region, improving heating and cooling rates as compared to other resistive heating strategies. The system has been widely tested under high-temperature conditions by performing several thermal emission measurements. A robust relationship between electric power and average sample temperature inside the DAC has been established up to about 1500 K by a measurement campaign on different simple substances. A micro-Raman spectrometer was used for various in situ optical measurements and allowed us to map the temperature distribution of the sample. The distribution resulted to be uniform within the typical uncertainty of these measurements (5% at 1000 K). The high-temperature performances of the DAC were also verified in a series of XAS (x-ray absorption spectroscopy) experiments using both nano-polycrystalline and single-crystal diamond anvils. XAS measurements of germanium at 3.5 GPa were obtained in the 300 K-1300 K range, studying the melting transition and nucleation to the crystal phase. The achievable heating and cooling rates of the DAC were studied exploiting a XAS dispersive setup, collecting series of near-edge XAS spectra with sub-second time resolution. An original XAS-based dynamical temperature calibration procedure was developed and used to monitor the sample and diamond temperatures during the application of constant power cycles, indicating that heating and cooling rates in the 100 K/s range can be easily achieved using this device

X-ray scattering and absorption studies of epitaxial strains in Co-Au superlattices

X-ray scattering and EXAFS are used to probe epitaxial strain in Co-Au superlattices grown by molecular beam epitaxy. We observe a thickness-dependent strain in ultrathin cobalt layers and find that tensile strains near misfit dislocations may be larger than in the more coherent interior of the Co layers. A strong enhancement of the magnetic absorption spectrum is observed in the superlattice samples.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/29464/1/0000549.pd