Determination of surfaces of constant inelastic strain rate at elevated temperature

An experimental effort to perform special exploratory multiaxial deformation tests on tubular specimens of type 316 stainless steel at 650 C (1200 F) is described. One test specimen was subjected to a time-independent torsional shear strain test history, and surfaces of constant inelastic strain rate (SCISRs) in an axial/torsional stress space were measured at various predetermined points during the test. A second specimen was subjected to a 14-week time-dependent (creep-recovery-creep periods) torsional shear stress histogram SCISRs determinations made at 17 points during the test. The tests were conducted in a high temperature, computer controlled axial/torsional test facility using high-temperature multiaxial extensometer. The effort was successful, and for the first time the existence of surfaces of constant inelastic strain rate was experimentally demonstrated

The beliefs of patients hospitalized for a mental illness about church service, prayer and God

Thesis (M.S.)--Boston Universit

Effects of Force Feedback and Distractor Location on a CDTI Target Selection Task

AbstractNew flight deck technologies need to be implemented in order to support the projected rises in traffic levels. Future cockpit displays of traffic information (CDTIs) shall accommodate the altered responsibilities of pilots by facilitating more efficient routes and minimizing conflicts. However, the unstable nature of the cockpit may present challenges when precise inputs are required. The present study investigated the effects of force feedback and distractors on point-and-click movement times in a CDTI environment. Participants performed target selection tasks with multiple levels of force feedback and distractor location. Results implied that force feedback failed to benefit movement times relative to the standard computer mouse. However, substantial interactions between distractor effects, force levels, and other target characteristics are explored

Quality control of gasohol using a micro-unit for membraneless gas diffusion

This work describes the development of a new spectrophotometric flow technique suitable for monitoring of ethanol content in gasohol fuel. Membraneless gas-diffusion (MBL-GD) was applied with one-step aqueous extraction of gasohol (1:2 gasohol/water). Segments of aqueous extract and color developing reagent were allowed to flow into two separate channels in the MBL-GD device. Inside the device, ethanol vapor can diffuse across a small headspace between the two channels (donor and acceptor). Introduction of an air-segment behind the zone of acceptor reagent to stop dispersion of the colored zone greatly improves the rapidity of analysis using this MBL-GD technique. Two methods were developed for quality control of gasohol by measuring ethanol content. Method I is suitable for direct calibration of E5 and E10. Method II is recommended for E20. These methods have high accuracy with good precision (% RSD: 1 to 4.9, n&#8201;=&#8201;45) and have a sample throughput of 26 samples per hour. E10 samples were compared with analysis using a standard GC method. </p

Measured Response for UAS Integration into the National Airspace System

The measured response (MR) is the response time of aircraft to Air Traffic Controller (ATCo) commands and clearances. The overall MR can be broken up into several components, including the pilot verbal latencies (MR1), the time between the end of an ATCo clearance and the beginning of the pilots read back, and the execution initiation latency (MR2), the time between the end of the ATCos clearance and when the pilot begins to execute a maneuver. The MR is a crucial concern for the integration of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS) due to potentially greater latencies stemming from remote pilot communication and command execution. As a result, it is important to quantify what latencies in verbal responding and command execution are acceptable for safe and efficient operations in the NAS. The present studies begin to address these issues in a series of four simulations supported by the UAS Integration into the NAS program

Pressure reversal study through tensile tests

This paper is a summary of the results from a study of the variables related to pressure reversal and was sponsored by the US Department of Transportation, Office of Pipeline Safety. The circumferential pipe stress, which is the most significant variable in pressure reversal, was examined by using tensile specimens and then relating the results to pressurized pipe. A model is proposed that gives some insight into how pressure reversal can be minimized when a section of pipe is being hydrotested. Twenty tensile specimens from X-42 electric resistance welded (ERW) pipe and twenty specimens from X-52 ERW pipe were tested. Each specimen had a machined flaw. The flaw regions were monitored using strain gages and photoelasticity. These tensile tests represent the first phase of a research effort to examine and understand the variables related to pressure reversal. The second phase of this effort will be with pipe specimens and presently is in progress

Structural insight into SUMO chain recognition and manipulation by the ubiquitin ligase RNF4

The small ubiquitin-like modifier (SUMO) can form polymeric chains that are important signals in cellular processes such as meiosis, genome maintenance and stress response. The SUMO-targeted ubiquitin ligase RNF4 engages with SUMO chains on linked substrates and catalyses their ubiquitination, which targets substrates for proteasomal degradation. Here we use a segmental labelling approach combined with solution nuclear magnetic resonance (NMR) spectroscopy and biochemical characterization to reveal how RNF4 manipulates the conformation of the SUMO chain, thereby facilitating optimal delivery of the distal SUMO domain for ubiquitin transfer

Durability-Based Design Criteria for a Quasi-Isotropic Carbon-Fiber-Reinforced Thermoplastic Automotive Composite

This report provides recommended durability-based design properties and criteria for a quais-isotropic carbon-fiber thermoplastic composite for possible automotive structural applications. The composite consisted of a PolyPhenylene Sulfide (PPS) thermoplastic matrix (Fortron's PPS - Ticona 0214B1 powder) reinforced with 16 plies of carbon-fiber unidirectional tape, [0?/90?/+45?/-45?]2S. The carbon fiber was Hexcel AS-4C and was present in a fiber volume of 53% (60%, by weight). The overall goal of the project, which is sponsored by the U.S. Department of Energy's Office of Freedom Car and Vehicle Technologies and is closely coordinated with the Advanced Composites Consortium, is to develop durability-driven design data and criteria to assure the long-term integrity of carbon-fiber-based composite systems for automotive structural applications. This document is in two parts. Part 1 provides design data and correlations, while Part 2 provides the underlying experimental data and models. The durability issues addressed include the effects of short-time, cyclic, and sustained loadings; temperature; fluid environments; and low-energy impacts (e.g., tool drops and kickups of roadway debris) on deformation, strength, and stiffness. Guidance for design analysis, time-independent and time-dependent allowable stresses, rules for cyclic loadings, and damage-tolerance design guidance are provided

Observations of red-giant variable stars by Aboriginal Australians

Aboriginal Australians carefully observe the properties and positions of stars, including both overt and subtle changes in their brightness, for subsistence and social application. These observations are encoded in oral tradition. I examine two Aboriginal oral traditions from South Australia that describe the periodic changing brightness in three pulsating, red-giant variable stars: Betelgeuse (Alpha Orionis), Aldebaran (Alpha Tauri), and Antares (Alpha Scorpii). The Australian Aboriginal accounts stand as the only known descriptions of pulsating variable stars in any Indigenous oral tradition in the world. Researchers examining these oral traditions over the last century, including anthropologists and astronomers, missed the description of these stars as being variable in nature as the ethnographic record contained several misidentifications of stars and celestial objects. Arguably, ethnographers working on Indigenous Knowledge Systems should have academic training in both the natural and social sciences.Comment: The Australian Journal of Anthropology (2018

Creating spaces: testimonio, impossible knowledge, and academe

Postprint upload.This article examines what it means to engage seriously with speech and writing events, such as testimonio, articulated by people whose theoretical base lies primarily in experience outside the walls of academe. I argue that we dismiss such unfamiliar scholarship to the detriment of all involved. If we are truly committed to learning, then we must expose ourselves to language forms and cultural norms that are different from those with which we are familiar. We must learn from them how to acknowledge the limits of our analysis and how to find “impossible knowledge” in unaccustomed places