992 research outputs found
Nutritional value of raw soybeans, extruded soybeans, roasted soybeans and tallow as fat sources in early lactating dairy cows
Thirty multiparous Holstein cows (29.8 ± 4.01days in milk; 671.6 ± 31.47 kg of body weight) were used in a completely randomized design to compare nutritional value of four fat sources including tallow, raw soybeans, extruded soybeans and roasted soybeans for 8 weeks. Experimental diets were a control containing 27.4 % alfalfa silage, 22.5% corn silage, and 50.1% concentrate, and four diets with either tallow, raw soybean, extruded soybean, or roasted soybean added to provide 1.93% supplemental fat. Dry matter and NEL intakes were similar among treatments, while cows fed fat diets had significantly (P<0.05) high NEL intakes when compared to control with no fat. Supplemental fat, whether tallow or full fat soybeans increased milk production (1.89-2.45 kg/d; P<0.01) and FCM production (1.05-2.79; P<0.01). Milk fat yield and percentage of cows fed fat-supplemented diets were significantly (P<0.01 and P<0.05 respectively) higher than control. Between fat-supplemented diets, roasted soybean caused highest milk fat yield and extruded soybean caused lowest milk fat yield. There was no significant effect of supplemental fat on the milk protein and lactose content and yield. Feed efficiency of fat-supplemented diets was significantly (P<0.01) higher than control. Body weight, body weight change and BCS (body condition score) of cows, as well as energy balance and energy efficiency were similar between treatments. In conclusion, while there was no significant effect of fat sources on production response of cows, fat originating from heat-treated soybean help to minimize imported RUP (rumen undegradable protein) sources level as fish meal in comparison with tallow and raw soybean oil. In the Current study, there was no statistical significance among nutritional values of oil from extruded soybeans and roasted soybeans
Investigating the medium range order in amorphous Ta<sub>2</sub>O<sub>5</sub> coatings
Ion-beam sputtered amorphous heavy metal oxides, such as Ta2O5, are widely used as the high refractive index layer of highly reflective dielectric coatings. Such coatings are used in the ground based Laser Interferometer Gravitational-wave Observatory (LIGO), in which mechanical loss, directly related to Brownian thermal noise, from the coatings forms an important limit to the sensitivity of the LIGO detector. It has previously been shown that heat-treatment and TiO2 doping of amorphous Ta2O5 coatings causes significant changes to the levels of mechanical loss measured and is thought to result from changes in the atomic structure. This work aims to find ways to reduce the levels of mechanical loss in the coatings by understanding the atomic structure properties that are responsible for it, and thus helping to increase the LIGO detector sensitivity. Using a combination of Reduced Density Functions (RDFs) from electron diffraction and Fluctuation Electron Microscopy (FEM), we probe the medium range order (in the 2-3 nm range) of these amorphous coatings
Correlations between the mechanical loss and atomic structure of amorphous TiO2-doped Ta2O5 coatings
<p>Highly reflective dielectric mirror coatings are critical components in a range of precision optics applications including frequency combs, optical atomic clocks, precision interferometry and ring laser gyroscopes. A key limitation to the performance in these applications is thermal noise, arising from the mechanical loss of the coatings. The origins of the mechanical loss from these coatings is not well understood.</p>
<p>Recent work suggests that the mechanical loss of amorphous Ta2O5 coatings can drop by as much as 40% when it is doped with TiO2. We use a combination of electron diffraction data and atomic modelling using molecular dynamics to probe the atomic structure of these coatings, and examine the correlations between changes in the atomic structure and changes in the mechanical loss of these coatings. Our results show the first correlation between changes in the mechanical loss and experimentally measured changes in the atomic structure resulting from variations in the level of TiO2 doping in TiO2-doped Ta2O5 coatings, in that increased homogeneity at the nearest-neighbour level appears to correlate with reduced mechanical loss. It is demonstrated that subtle but measurable changes in the nearest-neighbour homogeneity in an amorphous material can correlate with significant changes in macroscopic properties.</p>
Effect of heat treatment on mechanical dissipation in TaO coatings
Thermal noise arising from mechanical dissipation in dielectric reflective
coatings is expected to critically limit the sensitivity of precision
measurement systems such as high-resolution optical spectroscopy, optical
frequency standards and future generations of interferometric gravitational
wave detectors. We present measurements of the effect of post-deposition heat
treatment on the temperature dependence of the mechanical dissipation in
ion-beam sputtered tantalum pentoxide between 11\,K and 300\,K. We find the
temperature dependence of the dissipation is strongly dependent on the
temperature at which the heat treatment was carried out, and we have identified
three dissipation peaks occurring at different heat treatment temperatures. At
temperatures below 200\,K, the magnitude of the loss was found to increase with
higher heat treatment temperatures, indicating that heat treatment is a
significant factor in determining the level of coating thermal noise.Comment: accepted Classical and Quantum Gravity 201
Thymic Stromal-Cell Abnormalities and Dysregulated T-Cell Development in IL-2-Deficient Mice
The role that interleukin-2 (IL-2) plays in T-cell development is not known. To address this issue, we have investigated the nature of the abnormal thymic development and autoimmune disorders that occurs in IL-2-deficient (IL-2(–/–)) mice. After 4 to 5 weeks of birth, IL-2(–/–) mice progressively develop a thymic disorder resulting in the disruption of thymocyte maturation. This disorder is characterized by a dramatic reduction in cellularity, the selective loss of immature CD4(-)8(-) (double negative; DN) and CD4(+)8(+) (double positive; DP) thymocytes and defects in the thymic stromal-cell compartment. Immunohistochemical staining of sections of thymuses from specific pathogen-free and germ-free IL-2(–/–) mice of various ages showed a progressive ,loss of cortical epithelial cells, MHC class II-expressing cells, monocytes, and macrophages. Reduced numbers of macrophages were apparent as early as week after birth. Since IL-2(–/–) thymocyte progenitor populations could mature normally on transfer into a normal thymus, the thymic defect in IL-2(–/–) mice appears to be due to abnormalities among thymic stromal cells. These results underscore the role of IL-2 in maintaining functional microenvironments that are necessary to support thymocyte growth, development, and selection
Order within disorder: the atomic structure of ion-beam sputtered amorphous tantala (a-Ta2O5)
Amorphous tantala (a-Ta2O5) is a technologically important material often used in high-performance coatings. Understanding this material at the atomic level provides a way to further improve performance. This work details extended X-ray absorption fine structure measurements of a-Ta2O5 coatings, where high-quality experimental data and theoretical fits have allowed a detailed interpretation of the nearest-neighbor distributions. It was found that the tantalum atom is surrounded by four shells of atoms in sequence; oxygen, tantalum, oxygen, and tantalum. A discussion is also included on how these models can be interpreted within the context of published crystalline Ta 2O5 and other a-T2O5 studies
Investigation of mechanical losses of thin silicon flexures at low temperatures
The investigation of the mechanical loss of different silicon flexures in a
temperature region from 5 to 300 K is presented. The flexures have been
prepared by different fabrication techniques. A lowest mechanical loss of
was observed for a 130 m thick flexure at around 10 K.
While the mechanical loss follows the thermoelastic predictions down to 50 K a
difference can be observed at lower temperatures for different surface
treatments. This surface loss will be limiting for all applications using
silicon based oscillators at low temperatures. The extraction of a surface loss
parameter using different results from our measurements and other references is
presented. We focused on structures that are relevant for gravitational wave
detectors. The surface loss parameter = 0.5 pm was obtained. This
reveals that the surface loss of silicon is significantly lower than the
surface loss of fused silica.Comment: 16 pages, 7 figure
Theory of the propagation of coupled waves in arbitrarily-inhomogeneous stratified media
We generalize the invariant imbedding theory of the wave propagation and
derive new invariant imbedding equations for the propagation of arbitrary
number of coupled waves of any kind in arbitrarily-inhomogeneous stratified
media, where the wave equations are effectively one-dimensional. By doing this,
we transform the original boundary value problem of coupled second-order
differential equations to an initial value problem of coupled first-order
differential equations, which makes the numerical solution of the coupled wave
equations much easier. Using the invariant imbedding equations, we are able to
calculate the matrix reflection and transmission coefficients and the wave
amplitudes inside the inhomogeneous media exactly and efficiently. We establish
the validity and the usefulness of our results by applying them to the
propagation of circularly-polarized electromagnetic waves in one-dimensional
photonic crystals made of isotropic chiral media. We find that there are three
kinds of bandgaps in these structures and clarify the nature of these bandgaps
by exact calculations.Comment: 7 pages, 1 figure, to appear in Europhys. Let
In-hospital and six-month outcomes of elderly patients undergoing primary percutaneous coronary intervention for acute st-elevation myocardial infarction
BACKGROUND: Elderly patients constitute a rapidly growing proportion of the population, and hence the increasing rises in the number of patients with ST-segment-elevation myocardial infarction (STEMI). Primary percutaneous coronary intervention (PCI), which is now established as the preferred reperfusion strategy in STEMI patients, has been inadequately investigated in this high-risk group. The aim of the present study was to investigate the in- hospital and 6-month outcomes of primary PCI in elderly patients (� 75 years) with STEMI. METHODS: A total of 100 elderly patients with STEMI including those with cardiogenic shock were included. Primary PCI procedures were performed in a tertiary referral center between 2009 and 2014. In-hospital and 6-month outcomes of patients were recorded and analyzed. RESULTS: The average age of the patients was 79.6 ± 3.8 years (range = 75-90 years) and 27.0 were women. Cardiovascular risk factors and prior events were common. Nearly, half of the patients had three-vessel disease and the left anterior descending artery (LAD) was the most common infarct-related artery. The presence of cardiogenic shock but not the other variables was associated with less anatomic and procedural success (P < 0.001). It was also the major independent predictors of 6-month mortality in the patients aged � 75 years, hazard ratio (HR) = 8.02; 95% confidence interval (CI): 1.75-25.97, P < 0.001. In-hospital mortality was 2.4% in the patients without and 83.0% in those with cardiogenic shock. CONCLUSION: Primary PCI in aged patients could be associated with low complication rates and improved survival if performed in high-volume centers with experienced operators. Considering the very high rate of mortality in patients with cardiogenic shock, there should be measures to treat these patients before the onset of hemodynamic instability. © 2016, Isfahan University of Medical Sciences(IUMS). All rights reserved
- …