Development and Sizing of the JWST Integrated Science Instrument Module (ISIM) Metering Structure

The JWST Integrated Science Instrument Module (ISIM) includes a large metering structure (approx. 2m x 2m x 1.5m) that houses the science instruments and guider. Stringent dimensional stability and repeatability requirements combined with mass limitations led to the selection of a composite bonded frame design comprised of biased laminate tubes. Even with the superb material specific stiffness, achieving the required frequency for the given mass allocations in conjunction with severe spatial limitations imposed by the instrument complement has proven challenging. In response to the challenge, the ISIM structure team considered literally over 100 primary structure topology and kinematic mount configurations, and settled on a concept comprised of over 70 m of tubes, over 50 bonded joint assemblies, and a "split bi-pod" kinematic mount configuration. In this paper, we review the evolution of the ISIM primary structure topology and kinematic mount configuration to the current baseline concept

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite bonded joints below the cryogenic temperature of 30K (-405 F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to M55J/954-6 and T300/954-6 hybrid composite tubes (75mm square). Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties

Electrophysiological evidence for rapid 5-HT1A autoreceptor inhibition by vilazodone, a 5-HT1A receptor partial agonist and 5-HT reuptake inhibitor

Abstract This study examined the effect of vilazodone, a combined serotonin (5-HT) reuptake inhibitor and 5-HT 1A receptor partial agonist, paroxetine and fluoxetine on the sensitivity of 5-HT 1A autoreceptors of serotonergic dorsal raphe nucleus neurons in rats. These effects were assessed by determining the intravenous dose of (±)-8-hydroxy-2-(di-n-propylamino)-tetralin (8-OH-DPAT) required to suppress the basal firing rate of these neurons by 50% (ID 50 ) in anesthetized rats using in vivo electrophysiology. 5-HT uptake inhibition was determined by the ability of the compounds to reverse (±)- p -chloroamphetamine (PCA)-induced rat hypothalamic 5-HT depletion ex vivo . Acute vilazodone administration (0.63 and 2.1 µmol/kg, s.c.), compared with vehicle, significantly increased (2–3-fold) the ID 50 of 8-OH-DPAT at 4 h, but not 24 h after administration. Subchronic administration (3 days) significantly increased the ID 50 value at 4 h (3–4-fold) and at 24 h (~2-fold). In contrast, paroxetine and fluoxetine at doses that were supramaximal for 5-HT uptake inhibition did not significantly alter the ID 50 value of 8-OH-DPAT after acute or subchronic administration. Vilazodone antagonized the action of PCA 3.5 h and 5 h after a single dose (ID 50 1.49 and 0.46 µmol/kg, s.c., respectively), but was inactive 18 h post-administration, corroborating the electrophysiological results at 24 h following acute administration. The results are consistent with the concept of rapid and, following repeated treatment, prolonged inhibition of 5-HT 1A autoreceptors by vilazodone. This effect could occur by either direct interaction with, or desensitization of, these receptors, an effect which cannot be ascribed to vilazodone's 5-HT reuptake inhibiting properties

Mechanisms of Action of Currently Prescribed and Newly Developed Antiepileptic Drugs

Clinically available antiepileptic drugs (AEDs) decrease membrane excitability by interacting with neurotransmitter receptors or ion channels. AEDs developed before 1980 appear to act on sodium (Na) channels, -y-aminobutyric acid A (GABA A ) receptors, or calcium (Ca) channels. Benzodiazepines and barbiturates enhance GABA A -receptor-mediated inhibition. Phenytoin, car-bamazepine and, possibly, valproate (VPA) decrease high-frequency repetitive firing of action potentials by enhancing Na channel inactivation. Ethosuximide and VPA reduce a low threshold (T-type) Ca-channel current. The mechanisms of action of recently developed AEDs are less clear. Lamotrigine may decrease sustained high-frequency repetitive firing of voltage-dependent Na action potentials, and gabapentin (GBP) appears to bind to a specific binding site in the CNS with a restricted regional distribution. However, the identity of the binding site and the mechanism of action of GBP remain uncertain. The antiepileptic effect of felbamate may involve interaction at the strychnine-insensitive glycine site of the Af-methyl-D-aspartate receptor, but the mechanism of action is not yet proven.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65554/1/j.1528-1157.1994.tb05955.x.pd

Design and Analysis of the JWST Integrated Science Instrument Module (ISIM)Primary Metering Structure

The design and analysis of the James Webb Space Telescope (JWST) Integrated Science Instrument Model (ISIM) structural requirements is presented

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

Contents include the following: JWST/ISIM introduction. Design and analysis challenges for ISIM bonded joints. JWST/ISIM joint designs. Bonded joint analysis. Finite element modeling. Failure criteria and margin calculation. Analysis/test correlation procedure. Example of test data and analysis

Investigation of Bolt Preload Relaxation for JWST Thermal Heat Strap Assembly Joints with Aluminum-1100 and Indium Gaskets

Accurately predicting fastener preload relaxation in the James Webb Space Telescope (JWST) heat strap assemblies is essential to insure adequate thermal performance during its mission lifecycle. The mechanisms for preload relaxation in the strap joints include Al-1100 material creep, indium gasket flow-out, and embedment of the joint faying surfaces. This report documents the results from a bolted joint relaxation test, including analysis and curve fitting of the test data for predicting preloads five years after initial torque application. The report also includes the derivation of a preload uncertainty factor enveloping both torque/preload application scatter and expected preload relaxation at the end of mission life

Current Progress on the Design and Analysis of the JWST ISIM Bonded Joints for survivability at Cryogenic Temperatures

Viewgraphs on the material characterization and design of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) metal/composite bonded joints for its survivability at cryogenic temperatures is presented