Conducting polymer- hydrogel blends for electrochemically controlled drug release devices

Blends formed by electrochemical polymerization of polypyrrole (PPy) into polyacrylamide (PAAm) hydrogels were used as devices for controlled drug release. The influence of several parameters in the synthesis, such as type of hydrogel matrix and polymerization conditions was studied by using a fractional factorial design. The final goal was to obtain an adequate device for use in controlled release tests, based on electrochemical potential control. For controlled release tests, Safranin was used as model drug and release curves (amount of drug vs. time) have shown that these blends are promising materials for this use. The optimized blends obtained were characterized by cyclic voltammetry and Raman spectroscopy.Blendas formadas pela polimerização eletroquímica de pirrol em matriz de acrilamida (hidrogel) foram utilizadas, neste trabalho, como dispositivos para a liberação controlada de drogas. A influência de vários parâmetros nesta síntese, como tipo de matriz de hidrogel e condições de polimerização, foi estudada empregando-se planejamento fatorial fracionário. O objetivo final consistiu na obtenção de um material adequado para liberação baseada no controle de potencial. Para os testes de liberação foi utilizada Safranina, como substância modelo. As curvas de liberação demonstram a potencialidade do uso de tais dispositivos. Estes dispositivos foram também caracterizados por espectroscopia Raman e voltametria cíclica.FAPESPCNP

UV spectrophotrometry and chemometrics methods for simultaneous determinations of riboflavin (VB2), thiamine (VB1), pyridoxine (VB6) and nicotinamide (VPP)

In this work, the artificial neural networks (ANN) and partial least squares (PLS) regression were applied to UV spectral data for quantitative determination of thiamin hydrochloride (VB1), riboflavin phosphate (VB2), pyridoxine hydrochloride (VB6) and nicotinamide (VPP) in pharmaceutical samples. For calibration purposes, commercial samples in 0.2 mol L-1 acetate buffer (pH 4.0) were employed as standards. The concentration ranges used in the calibration step were: 0.1 - 7.5 mg L-1 for VB1, 0.1 - 3.0 mg L-1 for VB2, 0.1 - 3.0 mg L-1 for VB6 and 0.4 - 30.0 mg L-1 for VPP. From the results it is possible to verify that both methods can be successfully applied for these determinations. The similar error values were obtained by using neural network or PLS methods. The proposed methodology is simple, rapid and can be easily used in quality control laboratories.1638164

The impact of long-term azithromycin on antibiotic resistance in HIV-associated chronic lung disease

Selection for resistance to azithromycin (AZM) and other antibiotics such as tetracyclines and lincosamides remains a concern with long-term AZM use for treatment of chronic lung diseases (CLD). We investigated the impact of 48 weeks of AZM on the carriage and antibiotic resistance of common respiratory bacteria among children with HIV-associated CLD. Nasopharyngeal (NP) swabs and sputa were collected at baseline, 48 and 72 weeks from participants with HIV-associated CLD randomised to receive weekly AZM or placebo for 48 weeks and followed postintervention until 72 weeks. The primary outcomes were prevalence and antibiotic resistance of Streptococcus pneumoniae (SP), Staphylococcus aureus (SA), Haemophilus influenzae (HI) and Moraxella catarrhalis (MC) at these timepoints. Mixed-effects logistic regression and Fisher’s exact test were used to compare carriage and resistance, respectively. Of 347 (174 AZM, 173 placebo) participants (median age 15 years (IQR 13–18), female 49%), NP carriage was significantly lower in the AZM (n=159) compared to placebo (n=153) arm for SP (18% versus 41%, p<0.001), HI (7% versus 16%, p=0.01) and MC (4% versus 11%, p=0.02); SP resistance to AZM (62% (18 out of 29) versus 13% (8 out of 63), p<0.0001) or tetracycline (60% (18 out of 29) versus 21% (13 out of 63), p<0.0001) was higher in the AZM arm. Carriage of SA resistant to AZM (91% (31 out of 34) versus 3% (1 out of 31), p<0.0001), tetracycline (35% (12 out of 34) versus 13% (4 out of 31), p=0.05) and clindamycin (79% (27 out of 34) versus 3% (1 out of 31), p<0.0001) was also significantly higher in the AZM arm and persisted at 72 weeks. Similar findings were observed for sputa. The persistence of antibiotic resistance and its clinical relevance for future infectious episodes requiring treatment needs further investigation

Optimization of saponin extraction conditions from Ampelozizyphus amazonicus by using experimental design and surface response methodology

This works describes the use of experimental design and surface response methodology for optimization of saponin extraction from Ampelozizyphus amazonicus. For this purpose, a method employing extraction based on maceration assisted by ultrasound technique was utilized. The following factors were studied: extraction length of time and solvent composition. The total saponin was determined by using a gravimetric method and the results expressed by their relative proportion to total crude extract. For the specific condition, 60% hydro-alcoholic solution and 18 minutes extraction length of time has shown the best results. This method can be useful for extraction of substances with biological importance16291633Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

Square wave voltammetric simultaneous determination of NADH and Ascorbic acid using glassy carbon electrode and multivariate calibration

In this work, the partial least squares (PLS) method was applied to data obtained by square wave voltammetry for simultaneous determination of ascorbic acid and the b-nicotinamide adenine dinucleotide co-factor (NADH) in synthetic mixtures. The voltammetric curves were obtained in 0.2 mol L¹ phosphate buffer (pH 8.0). From the results it is possible to verify that the PLS method was able to determine these compounds simultaneously in the choose conditions. The results achieved for these determination provided a maximum value for the relative error of 1.7% for NADH and 2.1% for ascorbic acid. The proposed methodology is simple and further studies can make it useful for in vivo analysis.O método dos mínimos quadrados parciais (PLS) foi aplicado aos dados obtidos por voltametria de onda quadrada para a determinação simultânea de ácido ascórbico (AA) e do co-fator b-nicotinamida adenina dinucleotídeo (NADH) em misturas sintéticas. As curvas voltamétricas foram obtidas em tampão fosfato 0,2 mol L-1 (pH 8,0). Foi possível verificar que o método PLS permite a determinação destes compostos simultaneamente nas condições escolhidas. Os resultados mostraram um erro relativo máximo de 1,7% para o NADH e 2,1 % para o AA. A metodologia proposta é simples e desenvolvimentos posteriores podem torná-la útil para análises in vivo.5158Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Aplicação de métodos de calibração multivariada para a determinação simultânea de riboflavina (VB2), tiamina (VB1), piridoxina (VB6) e nicotinamida (VPP)

In this work, the artificial neural networks (ANN) and partial least squares (PLS) regression were applied to UV spectral data for quantitative determination of thiamin hydrochloride (VB1), riboflavin phosphate (VB2), pyridoxine hydrochloride (VB6) and nicotinamide (VPP) in pharmaceutical samples. For calibration purposes, commercial samples in 0.2 mol L-1 acetate buffer (pH 4.0) were employed as standards. The concentration ranges used in the calibration step were: 0.1 - 7.5 mg L-1 for VB1, 0.1 - 3.0 mg L-1 for VB2, 0.1 - 3.0 mg L-1 for VB6 and 0.4 - 30.0 mg L-1 for VPP. From the results it is possible to verify that both methods can be successfully applied for these determinations. The similar error values were obtained by using neural network or PLS methods. The proposed methodology is simple, rapid and can be easily used in quality control laboratories

Assessment of the discrimination of animal fat by FT_Raman spectroscopy

In recent years, there has been an increased attention towards the composition of feeding fats. In the aftermath of the BSE crisis all animal by-products utilised in animal nutrition have been subjected to close scrutiny. Regulation requires that the material belongs to the category of animal by-products fit for human consumption. This implies the use of reliable techniques in order to insure the safety of products. The feasibility of using rapid and non-destructive methods, to control the composition of feedstuffs on animal fats has been studied. Fourier Transform Raman spectroscopy has been chosen for its advantage to give detailed structural information. Data were treated using chemometric methods as PCA and PLS-DA which have permitted to separate well the different classes of animal fats. The same methodology was applied on fats from various types of feedstock and production technology processes. PLS-DA model for the discrimination of animal fats from the other categories presents a sensitivity and a specificity of 0.958 and 0.914, respectively. These results encourage the use of FT-Raman spectroscopy to discriminate animal fats