126 research outputs found
Monitoring Galvanic Replacement Through Three-Dimensional Morphological and Chemical Mapping
Galvanic replacement reactions on metal nanoparticles are often used for the
preparation of hollow nanostructures with tunable porosity and chemical
composition, leading to tailored optical and catalytic properties. However, the
precise interplay between the three-dimensional (3D) morphology and chemical
composition of nanostructures during Galvanic replacement is not always well
understood as the 3D chemical imaging of nanoscale materials is still
challenging. It is especially far from straightforward to obtain detailed
information from the inside of hollow nanostructures using electron microscopy
techniques such as SEM or TEM. We demonstrate here that a combination of
state-of-the-art EDX mapping with electron tomography results in the
unambiguous determination of both morphology transformation and elemental
composition of nanostructures in 3D, during Galvanic replacement of Ag
nanocubes. This work provides direct and unambiguous experimental evidence
leading to new insights in the understanding of the galvanic replacement
reaction. In addition, the powerful approach presented here can be applied to a
wide range of nanoscale transformation processes, which will undoubtedly guide
the development of novel nanostructures
Three dimensional mapping of Fe dopants in ceria nanocrystals using direct spectroscopic electron tomography
Electron tomography is a powerful technique for the 3D characterization of the morphology of nanostructures. Nevertheless, resolving the chemical composition of complex nanostructures in 3D remains challenging and the number of studies in which electron energy loss spectroscopy (EELS) is combined with tomography is limited. During the last decade, dedicated reconstruction algorithms have been developed for HAADF-STEM tomography using prior knowledge about the investigated sample. Here, we will use the prior knowledge that the experimental spectrum of each reconstructed voxel is a linear combination of a well-known set of references spectra in a so-called direct spectroscopic tomography technique. Based on a simulation experiment, it is shown that this technique provides superior results in comparison to conventional reconstruction methods for spectroscopic data, especially for spectrum images containing a relatively low signal to noise ratio. Next, this technique is used to investigate the spatial distribution of Fe dopants in Fe:Ceria nanoparticles in 3D. It is shown that the presence of the Fe2+ dopants is correlated with a reduction of the Ce atoms from Ce4+ towards Ce3+. In addition, it is demonstrated that most of the Fe dopants are located near the voids inside the nanoparticle
Multiple Dot-in-Rod PbS/CdS heterostructures with high photoluminescence quantum yield in the near-infrared
Pb cations in PbS quantum rods made from CdS quantum rods by successive complete cationic exchange reactions are partially re-exchanged for Cd cations. Using STEM-HAADF, we show that this leads to the formation of unique multiple dot-in-rod PbS/CdS heteronanostructures, with a photoluminescence quantum yield of 45-55%. We argue that the formation of multiple dot-in-rods is related to the initial polycrystallinity of the PbS quantum rods, where each PbS crystallite transforms in a separate PbS/CdS dot-in-dot. Effective mass modeling indicates that electronic coupling between the different PbS conduction band states is feasible for the multiple dot-in-rod geometries obtained, while the hole states remain largely uncoupled
Long-Term Type 1 Diabetes Enhances In-Stent Restenosis after Aortic Stenting in Diabetes-Prone BB Rats
Type 1 diabetic patients have increased risk of developing in-stent restenosis following endovascular stenting. Underlying pathogenetic mechanisms are not fully understood partly due to the lack of a relevant animal model to study the effect(s) of long-term autoimmune diabetes on development of in-stent restenosis. We here describe the development of in-stent restenosis in long-term (~7 months) spontaneously diabetic and age-matched, thymectomized, nondiabetic Diabetes Prone BioBreeding (BBDP) rats (n = 6-7 in each group). Diabetes was suboptimally treated with insulin and was characterized by significant hyperglycaemia, polyuria, proteinuria, and increased HbA1c levels. Stented abdominal aortas were harvested 28 days after stenting. Computerized morphometric analysis revealed significantly increased neointima formation in long-term diabetic rats compared with nondiabetic controls. In conclusion, long-term autoimmune diabetes in BBDP rats enhances in-stent restenosis. This model can be used to study the underlying pathogenetic mechanisms of diabetes-enhanced in-stent restenosis as well as to test new therapeutic modalities
Measuring Lattice Strain in Three Dimensions through Electron Microscopy
The three-dimensional (3D) atomic structure of nanomaterials, including strain, is crucial to understand their properties. Here, we investigate lattice strain in Au nanodecahedra using electron tomography. Although different electron tomography techniques enabled 3D characterizations of nanostructures at the atomic level, a reliable determination of lattice strain is not straightforward. We therefore propose a novel model-based approach from which atomic coordinates are
Organohalide-respiring Desulfoluna species isolated from marine environments
The online version of this article (https://doi.org/10.1038/s41396-019-0573-y) contains supplementary
material, which is available to authorized usersThe genus Desulfoluna comprises two anaerobic sulfate-reducing strains, D. spongiiphila AA1T and D. butyratoxydans MSL71T, of which only the former was shown to perform organohalide respiration (OHR). Here we isolated a third strain, designated D. spongiiphila strain DBB, from marine intertidal sediment using 1,4-dibromobenzene and sulfate as the electron acceptors and lactate as the electron donor. Each strain harbors three reductive dehalogenase gene clusters (rdhABC) and corrinoid biosynthesis genes in their genomes, and dehalogenated brominated but not chlorinated organohalogens. The Desulfoluna strains maintained OHR in the presence of 20?mM sulfate or 20?mM sulfide, which often negatively affect other organohalide-respiring bacteria. Strain DBB sustained OHR with 2\% oxygen in the gas phase, in line with its genetic potential for reactive oxygen species detoxification. Reverse transcription-quantitative PCR revealed differential induction of rdhA genes in strain DBB in response to 1,4-dibromobenzene or 2,6-dibromophenol. Proteomic analysis confirmed expression of rdhA1 with 1,4-dibromobenzene, and revealed a partially shared electron transport chain from lactate to 1,4-dibromobenzene and sulfate, which may explain accelerated OHR during concurrent sulfate reduction. Versatility in using electron donors, de novo corrinoid biosynthesis, resistance to sulfate, sulfide and oxygen, and concurrent sulfate reduction and OHR may confer an advantage to marine Desulfoluna strains.We thank Johanna Gutleben and Maryam Chaib de Mares for sediment sampling, W. Irene C. Rijpstra for fatty acid analysis, and Andreas Marquardt (Proteomics Centre of the University of Konstanz) for proteomic analyses. We acknowledge the China Scholarship Council (CSC) for the support to PP and YL. The authors
thank BE-BASIC funds (grants F07.001.05 and F08.004.01) from the Dutch Ministry of Economic Affairs, ERC grant (project 323009), the Gravitation grant (project 024.002.002) and the UNLOCK project (NRGWI.obrug.2018.005) of the Netherlands Ministry of Education, Culture and Science and the Netherlands Science Foundation (NWO), and National Natural Science Foundation of China (project No.51709100) for funding.info:eu-repo/semantics/publishedVersio
CubeSpec, A Mission Overview
CubeSpec is an in-orbit demonstration CubeSat mission in the ESA technology programme, developed and funded in Belgium. The goal of the mission is to demonstrate high-spectral-resolution astronomical spectroscopy from a 6-unit CubeSat. The prime science demonstration case for the in-orbit demonstration mission is to unravel the interior of massive stars using asteroseismology by high-cadance monitoring of the variations in spectral line profiles during a few months. The technological challenges are numerous. The 10x20cm aperture telescope and echelle spectrometer have been designed to fit in a 10x10x20cm volume.
Under low-Earth orbit thermal variations, maintaining the fast telescope focus and spectrometer alignment is achieved via an athermal design. Straylight rejection and thermal shielding from the Sun and Earth infrared flux is achieved via deploying Earth and Sunshades. The narrow spectrometer slit requires arcsecond-level pointing stability using a performant 3-axis wheel stabilised attitude control system with star tracker augmented with a fine beam steering mechanism controlled in closed loop with a guiding sensor. The high cadence, long-term monitoring requirement of the mission poses specific requirements on the orbit and operational scenarios to enable the required sky visibility.
CubeSpec is starting the implementation phase, with a planned launch early 2024
- …