10,137 research outputs found
Data reduction in the ITMS system through a data acquisition model with self-adaptive sampling rate
Long pulse or steady state operation of fusion experiments require data acquisition and processing systems that reduce the volume of data involved. The availability of self-adaptive sampling rate systems and the use of real-time lossless data compression techniques can help solve these problems. The former is important for continuous adaptation of sampling frequency for experimental requirements. The latter allows the maintenance of continuous digitization under limited memory conditions. This can be achieved by permanent transmission of compressed data to other systems. The compacted transfer ensures the use of minimum bandwidth. This paper presents an implementation based on intelligent test and measurement system (ITMS), a data acquisition system architecture with multiprocessing capabilities that permits it to adapt the system’s sampling frequency throughout the experiment. The sampling rate can be controlled depending on the experiment’s specific requirements by using an external dc voltage signal or by defining user events through software. The system takes advantage of the high processing capabilities of the ITMS platform to implement a data reduction mechanism based in lossless data compression algorithms which are themselves based in periodic deltas
Configurational lattice dynamics: The phase diagram of Rh − Pd
Free energies of Rh-Pd alloys as functions of both temperature and composition are calculated using quasiharmonic lattice dynamics. The free energy of the disordered solid is determined from an ensemble of a large number of randomly generated configurations. Both configurational and vibrational contributions to the entropy and enthalpy of mixing are taken into account. We study the convergence with the number of random configurations, and analyze the validity of the zero static internal stress approximation ZSISA, where only external strains are relaxed fully dynamically while internal stresses are relaxed in the static approximation. It is shown that the use of ZSISA allows an accurate calculation of free energies in a fraction of the time needed to carry out fully dynamic optimizations. From the values of free energies as functions of composition and temperature the phase diagram of Rh-Pd alloys is calculated, showing a good agreement with Monte Carlo simulations as well as with experiment. It is also shown that although free energies of mixing appear to be linear functions of temperature to a good approximation, the explicit expressions given by the configurational lattice dynamics method show that both enthalpies and entropies of mixing change appreciably with temperature.Fil: Cienfuegos, Clarisa. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; ArgentinaFil: Isoardi, E. P.. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Física; ArgentinaFil: Barrera, Gustavo Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentin
Web based system architecture for long pulse remote experimentation
Remote experimentation (RE) methods will be essential in next generation fusion devices. Requirements for long pulse RE will be: on-line data visualization, on-line data acquisition processes monitoring and on-line data acquisition systems interactions (start, stop or set-up modifications). Note that these methods are not oriented to real-time control of fusion plant devices.
INDRA Sistemas S.A., CIEMAT (Centro de Investigaciones Energéticas Medioambientales y Tecnológicas) and UPM (Universidad Politécnica de Madrid) have designed a specific software architecture for these purposes. The architecture can be supported on the BeansNet platform, whose integration with an application server provides an adequate solution to the requirements. BeansNet is a JINI based framework developed by INDRA, which makes easy the implementation of a remote experimentation model based on a Service Oriented Architecture. The new software architecture has been designed on the basis of the experience acquired in the development of an upgrade of the TJ-II remote experimentation system
A versatile trigger and synchronization module with IEEE1588 capabilities and EPICS support.
Event timing and synchronization are two key aspects to improve in the implementation of distributed data acquisition (dDAQ) systems such as the ones used in fusion experiments. It is also of great importance the integration of dDAQ in control and measurement networks. This paper analyzes the applicability of the IEEE1588 and EPICS standards to solve these problems, and presents a hardware module implementation based in both of them that allow adding these functionalities to any DAQ. The IEEE1588 standard facilitates the integration of event timing and synchronization mechanisms in distributed data acquisition systems based on IEEE 803.3 (Ethernet). An optimal implementation of such system requires the use of network interface devices which include specific hardware resources devoted to the IEE1588 functionalities. Unfortunately, this is not the approach followed in most of the large number of applications available nowadays. Therefore, most solutions are based in software and use standard hardware network interfaces. This paper presents the development of a hardware module (GI2E) with IEEE1588 capabilities which includes USB, RS232, RS485 and CAN interfaces. This permits to integrate any DAQ element that uses these interfaces in dDAQ systems in an efficient and simple way. The module has been developed with Motorola's Coldfire MCF5234 processor and National Semiconductors's PHY DP83640T, providing it with the possibility to implement the PTP protocol of IEEE1588 by hardware, and therefore increasing its performance over other implementations based in software. To facilitate the integration of the dDAQ system in control and measurement networks the module includes a basic Input/Output Controller (IOC) functionality of the Experimental Physics and Industrial Control System (EPICS) architecture. The paper discusses the implementation details of this module and presents its applications in advanced dDAQ applications in the fusion community
ASSESSING ADMINISTRATION CHARGES FOR THE AFFILIATE IN INDIVIDUAL ACCOUNT SYSTEMS
In any pension system based on capitalization, affiliates have to cover certain explicit costs which in a pay-as-you-go system would be implicit. In this paper we set out a model based on Whitehouse (2000) and Diamond (1999) to enable the explicit costs borne by the affiliate both during his working life and his retirement period to be assessed. It also shows the relationships between the different ways of measuring the costs that make up the total price finally paid by the contributors. Included in the model is the notable effect that some factors -such as gaps in contribution profiles, account transfers and changes in salary profiles- have on projecting the costs borne by the affiliates. Finally we carry out an international comparison of administration costs from the point of view of the affiliate, focusing special attention on the countries of Latin America and Spain. This has a double objective: 1.- To test the validity of criticisms made by some researchers as to whether the new capitalization systems introduced in Latin America are too expensive to run for the affiliates. 2.- To serve as a reference for the individual pension scheme system in Spain. En un sistema de pensiones basado en la capitalización los afiliados deben hacer frentea unos costes explícitos que en el sistema de reparto son implícitos. En este trabajo sedesarrolla un modelo, basado en Whitehouse (2000) y Diamond (1999), que permite evaluarlas comisiones explícitas que soporta el afiliado, tanto durante la vida laboral como durante laetapa de jubilación y que, además, muestra la relación entre las diferentes medidas de loscostes que integran el precio total que finalmente pagan los cotizantes. En el modelo seintroduce el efecto de algunos aspectos que tienen una repercusión muy importante en laproyección de los costes que soportan los afiliados: ¿vacíos¿ en los perfiles de aportación,efecto de los traspasos de fondos y cambio en los perfiles de salarios. Por último, se realizauna comparación internacional de los costes de administración desde la óptica de los afiliadoscon un doble objetivo:1.-Contrastar la validez de la crítica realizada por algunos investigadores a los nuevossistemas de capitalización individual implantados en América Latina, en el sentido de que sonexcesivamente caros de gestionar para los afiliados.2.-Servir de referencia para el sistema de planes de pensiones individuales en España.Capitalización, Costes de Administración, Fondo de pensiones, América Latina. Capitalization, Administration Costs, Pension Funds, Latin America
TARANET: Traffic-Analysis Resistant Anonymity at the NETwork layer
Modern low-latency anonymity systems, no matter whether constructed as an
overlay or implemented at the network layer, offer limited security guarantees
against traffic analysis. On the other hand, high-latency anonymity systems
offer strong security guarantees at the cost of computational overhead and long
delays, which are excessive for interactive applications. We propose TARANET,
an anonymity system that implements protection against traffic analysis at the
network layer, and limits the incurred latency and overhead. In TARANET's setup
phase, traffic analysis is thwarted by mixing. In the data transmission phase,
end hosts and ASes coordinate to shape traffic into constant-rate transmission
using packet splitting. Our prototype implementation shows that TARANET can
forward anonymous traffic at over 50~Gbps using commodity hardware
Creating Opportunities for the Emergence of Intergenerational Communities of Practice Using Place-based Storytelling and Technologies
- …