Unravelling the wavelength dependency of anthracene photoinitiated reactions

C

Thermal-Hydraulic Analyses of Heat Transfer Fluid Requirements and Characteristics for Coupling A Hydrogen Production Plant to a High-Temperature Nuclear Reactor

The Department of Energy is investigating the use of high-temperature nuclear reactors to produce hydrogen using either thermochemical cycles or high-temperature electrolysis. Although the hydrogen production processes are in an early stage of development, coupling either of these processes to the hightemperature reactor requires both efficient heat transfer and adequate separation of the facilities to assure that off-normal events in the production facility do not impact the nuclear power plant. An intermediate heat transport loop will be required to separate the operations and safety functions of the nuclear and hydrogen plants. A next generation high-temperature reactor could be envisioned as a single-purpose facility that produces hydrogen or a dual-purpose facility that produces hydrogen and electricity. Early plants, such as the proposed Next Generation Nuclear Plant, may be dual-purpose facilities that demonstrate both hydrogen and efficient electrical generation. Later plants could be single-purpose facilities. At this stage of development, both single- and dual-purpose facilities need to be understood. Seven possible configurations for a system that transfers heat between the nuclear reactor and the hydrogen and/or electrical generation plants were identified. These configurations included both direct and indirect cycles for the production of electricity. Both helium and liquid salts were considered as the working fluid in the intermediate heat transport loop. Methods were developed to perform thermalhydraulic and cycle-efficiency evaluations of the different configurations and coolants. The thermalhydraulic evaluations estimated the sizes of various components in the intermediate heat transport loop for the different configurations. The relative sizes of components provide a relative indication of the capital cost associated with the various configurations. Estimates of the overall cycle efficiency of the various configurations were also determined. The evaluations determined which configurations and coolants are the most promising from thermal-hydraulic and efficiency points of view. These evaluations also determined which configurations and options do not appear to be feasible at the current time

Visible light-induced switching of soft matter materials properties based on thioindigo photoswitches

Thioindigos are visible light responsive photoswitches with excellent spatial control over the conformational change between their trans- and cis- isomers. However, they possess limited solubility in all conventional organic solvents and polymers, hindering their application in soft matter materials. Herein, we introduce a strategy for the covalent insertion of thioindigo units into polymer main chains, enabling thioindigos to function within crosslinked polymeric hydrogels. We overcome their solubility issue by developing a thioindigo bismethacrylate linker able to undergo radical initiated thiol-ene reaction for step-growth polymerization, generating indigo-containing polymers. The optimal wavelength for the reversible trans-/cis- isomerisation of thioindigo was elucidated by constructing a detailed photochemical action plot of their switching efficiencies at a wide range of monochromatic wavelengths. Critically, indigo-containing polymers display significant photoswitching of the materials’ optical and physical properties in organic solvents and water. Furthermore, the photoswitching of thioindigo within crosslinked structures enables visible light induced modulation of the hydrogel stiffness. Both the thioindigo-containing hydrogels and photoswitching processes are non-toxic to cells, thus offering opportunities for advanced applications in soft matter materials and biology-related research

Zero Frequency Current Noise for the Double Tunnel Junction Coulomb Blockade

We compute the zero frequency current noise numerically and in several limits analytically for the coulomb blockade problem consisting of two tunnel junctions connected in series. At low temperatures over a wide range of voltages, capacitances, and resistances it is shown that the noise measures the variance in the number of electrons in the region between the two tunnel junctions. The average current, on the other hand, only measures the mean number of electrons. Thus, the noise provides additional information about transport in these devices which is not available from measuring the current alone.Comment: 33 pages, 10 figure

Color adjectives, standards, and thresholds: an experimental investigation

Are color adjectives (“red”, “green”, etc.) relative adjectives or absolute adjectives? Existing theories of the meaning of color adjectives attempt to answer that question using informal (“armchair”) judgments. The informal judgments of theorists conflict: it has been proposed that color adjectives are absolute with standards anchored at the minimum degree on the scale, that they are absolute but have near- midpoint standards, and that they are relative. In this paper we report two experiments, one based on entailment patterns and one based on presupposition accommodation, that investigate the meaning of scalar adjectives. We find evidence confirming the existence of subgroups of the population who operate with different standards for color adjectives. The evidence of interpersonal variation in where standards are located on the relevant scale and how those standards can be adjusted indicates that the existing theories of the meaning of color adjectives are at best only partially correct. We also find evidence that paradigmatic relative adjectives (“tall”, “wide”) behave in ways that are not predicted by the standard theory of scalar adjectives. We discuss several different possible explanations for this unexpected behavior. We conclude by discussing the relevance of our findings for philosophical debates about the nature and extent of semantically encoded context sensitivity in which color adjectives have played a key role

Surgical reconstruction of the left main coronary artery with patch-angioplasty

<p>Abstract</p> <p>Background</p> <p>Conventional coronary artery bypass grafting (CABG) has been established as the treatment of choice for left main coronary artery (LMCA) stenosis However, the conventional grafting provides a retrograde perfusion to extensive myocardial area and leads prospectively to competitive flow of the non-occluded coronaries thus consuming the grafts. Surgical reconstruction of the LMCA with patch-angioplasty is an alternative method that eliminates these drawbacks.</p> <p>Methods</p> <p>Between February 1997 and July 2007, 37 patients with isolated LMCA stenosis were referred for surgical ostial reconstruction. In 27 patients (73%) surgical angioplasties have been performed. All patients were followed up clinically and with transesophageal echocardiography (TEE) and coronary angiography when required.</p> <p>Results</p> <p>In 10 patients (27%) a LMCA stenosis could not be confirmed. There were no early mortality or perioperative myocardial infarctions. The postoperative course was uneventful in all patients. In 25 patients, TEE demonstrated a wide open main stem flow pattern one to six months after reconstruction of the left main coronary artery with one patch mild aneurysmal dilated.</p> <p>Conclusions</p> <p>The surgical reconstruction with patch-angioplasty is a safe and effective method for the treatment of proximal and middle LMCA stenosis. Almost one third of the study group had no really LMCA stenosis: antegrade flow pattern remained sustained and the arterial grafts have been spared. In the cases of unclear or suspected LMCA stenosis, cardio-CT can be performed to unmask catheter-induced coronary spasm as the underlying reason for isolated LMCA stenosis.</p

Teaching Implicit Leadership Theories to develop leaders and leadership – How and why it can make a difference

Implicit leadership theories (ILTs) are lay images of leadership, which are individually and socially determined. We discuss how teaching ILTs contributes to developing leaders and leaderships by raising self- and social awareness for the contexts in which leadership takes place. We present and discuss a drawing exercise to illustrate different ILTs and discuss the implications for leaders and leadership, with a particular focus on how leaders claim, and are granted, leader identities in groups

How non-native English-speaking staff are evaluated in linguistically diverse organizations: A sociolinguistic perspective

The aim of this paper is to examine the effects of evaluations of non-native speaking staff?s spoken English in international business settings. We adopt a sociolinguistic perspective on power and inequalities in linguistically diverse organizations in an Anglophone environment. The interpretive qualitative study draws on 54 interviews with non-native English-speaking staff in 19 UK business schools. We analyze, along the dimensions of status, solidarity and dynamism, the ways in which non-native speakers, on the basis of their spoken English, are evaluated by themselves and by listeners. We show how such evaluations refer to issues beyond the speaker?s linguistic fluency, and have consequences for her or his actions. The study contributes to the literature on language and power in international business through offering fine-grained insights into and elucidating how the interconnected evaluative processes impact the formation and perpetuation of organizational power relations and inequalities. It also puts forward implications for managing the officially monolingual, yet linguistically diverse organizations

Microdissected "cuboids" for microfluidic drug testing of intact tissues

As preclinical animal tests often do not accurately predict drug effects later observed in humans, most drugs under development fail to reach the market. Thus there is a critical need for functional drug testing platforms that use human, intact tissues to complement animal studies. To enable future multiplexed delivery of many drugs to one small biopsy, we have developed a multi-well microfluidic platform that selectively treats cuboidal-shaped microdissected tissues or “cuboids” with well-preserved tissue microenvironments. We create large numbers of uniformly-sized cuboids by semi-automated sectioning of tissue with a commercially available tissue chopper. Here we demonstrate the microdissection method on normal mouse liver, which we characterize with quantitative 3D imaging, and on human glioma xenograft tumors, which we evaluate after time in culture for viability and preservation of the microenvironment. The benefits of size uniformity include lower heterogeneity in future biological assays as well as facilitation of their physical manipulation by automation. Our prototype platform consists of a microfluidic circuit whose hydrodynamic traps immobilize the live cuboids in arrays at the bottom of a multi-well plate. Fluid dynamics simulations enabled the rapid evaluation of design alternatives and operational parameters. We demonstrate the proof-of-concept application of model soluble compounds such as dyes (CellTracker, Hoechst) and the cancer drug cisplatin. Upscaling of the microfluidic platform and microdissection method to larger arrays and numbers of cuboids could lead to direct testing of human tissues at high throughput, and thus could have a significant impact on drug discovery and personalized medicine.The National Cancer Institute; Juno Therapeutics; CoMotion at the University of Washington; a Hong Kong Research Grant Council; an International Scholars award from the Consejo Nacional de Ciencia y Tecnología of Mexico; a Department of Defense Prostate Cancer Research Program and the National Science Foundation Graduate Research Fellowship Program.http://pubs.rsc.org/en/Journals/JournalIssues/LChj2022Mechanical and Aeronautical Engineerin

Synthesis of Well-Defined, Surfactant-Free Co₃O₄ Nanoparticles:The Impact of Size and Manganese Promotion on Co₃O₄ Reduction and Water Oxidation Activity

Abstract: A surfactant-free synthetic route has been developed to produce size-controlled, cube-like cobalt oxide nanoparticles of three different sizes in high yields. It was found that by using sodium nitrite as salt-mediating agent, near-quantitative yields could be obtained. The size of the nanoparticles could be altered from 11 to 22 nm by changing the cobalt concentration and reaction time. These surfactant-free nanoparticles form ideal substrates for facile deposition of further elements such as manganese. The effect of size of the cobalt oxide nanoparticles and the presence of manganese on the reducibility of cobalt oxide to metallic cobalt was investigated. Similarly, the effect of these parameters was investigated with a visible light promoted water oxidation system with cobalt oxide as catalyst, together with [Ru(bpy) 3] 2+ light harvester dye and an electron acceptor. Graphical Abstract: A novel surfactant-free synthetic route has been developed to produce size-controlled, cube shaped cobalt oxide nanoparticles in high yields. [Figure not available: see fulltext.]. </p