1,007 research outputs found
Study of effects of injector geometry on fuel-air mixing and combustion
An implicit finite-difference method has been developed for computing the flow in the near field of a fuel injector as part of a broader study of the effects of fuel injector geometry on fuel-air mixing and combustion. Detailed numerical results have been obtained for cases of laminar and turbulent flow without base injection, corresponding to the supersonic base flow problem. These numerical results indicated that the method is stable and convergent, and that significant savings in computer time can be achieved, compared with explicit methods
Some effects of combustion on turbulent mixing
Mixing and combustion of near-sonic central hydrogen jets and coaxial supersonic air or nitrogen streams are discussed. Results of concentration measurements in these flows are presented
A simple reaction-rate model for turbulent diffusion flames
A simple reaction rate model is proposed for turbulent diffusion flames in which the reaction rate is proportional to the turbulence mixing rate. The reaction rate is also dependent on the mean mass fraction and the mean square fluctuation of mass fraction of each reactant. Calculations are compared with experimental data and are generally successful in predicting the measured quantities
Effects of Nacelle configuration/position on performance of subsonic transport
An experimental study was conducted to explore possible reductions in installed propulsion system drag due to underwing aft nacelle locations. Both circular (C) and D inlet cross section nacelles were tested. The primary objectives were: to determine the relative installed drag of the C and D nacelle installations; and, to compare the drag of each aft nacelle installation with that of a conventional underwing forward, drag of each aft nacelle installation with that of a conventional underwing forward, pylon mounted (UTW) nacelle installation. The tests were performed in the NASA-Langley Research Center 16-Foot Transonic Wind Tunnel at Mach numbers from 0.70 to 0.85, airplane angles of attack from -2.5 to 4.1 degrees, and Reynolds numbers per foot from 3.4 to 4.0 million. The nacelles were installed on the NASA USB full span transonic transport model with horizontal tail on. The D nacelle installation had the smallest drag of those tested. The UTW nacelle installation had the largest drag, at 6.8 percent larger than the D at Mach number 0.80 and lift coefficient (C sub L) 0.45. Each tested configuration still had some interference drag, however. The effect of the aft nacelles on airplane lift was to increase C sub L at a fixed angle of attack relative to the wing body. There was higher lift on the inboard wing sections because of higher pressures on the wing lower surface. The effects of the UTW installation on lift were opposite to those of the aft nacelles
Aerodynamic and acoustic behavior of a YF-12 inlet at static conditions
An aeroacoustic test program to determine the cause of YF-12 inlet noise suppression was performed with a YF-12 aircraft at ground static conditions. Data obtained over a wide range of engine speeds and inlet configurations are reported. Acoustic measurements were made in the far field and aerodynamic and acoustic measurements were made inside the inlet. The J-58 test engine was removed from the aircraft and tested separately with a bellmouth inlet. The far field noise level was significantly lower for the YF-12 inlet than for the bellmouth inlet at engine speeds above 5500 rpm. There was no evidence that noise suppression was caused by flow choking. Multiple pure tones were reduced and the spectral peak near the blade passing frequency disappeared in the region of the spike support struts at engine speeds between 6000 and 6600 rpm
A study of turbulent flow between parallel plates by a statistical method
Turbulent Couette flow between parallel plates was studied from a statistical mechanics approach utilizing a model equation, similar to the Boltzmann equation of kinetic theory, which was proposed by Lundgren from the velocity distribution of fluid elements. Solutions to this equation are obtained numerically, employing the discrete ordinate method and finite differences. Two types of boundary conditions on the distribution function are considered, and the results of the calculations are compared to available experimental data. The research establishes that Lundgren's equation provides a very good description of turbulence for the flow situation considered and that it offers an analytical tool for further study of more complex turbulent flows. The present work also indicates that modelling of the boundary conditions is an area where further study is required
Implementing Zn<sup>2+</sup> ion and pH-value control into artificial mussel glue proteins by abstracting a His-rich domain from preCollagen
A His-rich domain of preCollagen-D found in byssal threads is derivatized with Cys and Dopa flanks to allow for mussel-inspired polymerization. Artificial mussel glue proteins are accessed that combine cysteinyldopa for adhesion with sequences for pH or Zn2+ induced β-sheet formation. The artificial constructs show strong adsorption to Al2O3, the resulting coatings tolerate hypersaline conditions and cohesion is improved by activating the β-sheet formation, that enhances E-modulus up to 60%
The Cosmological Time Function
Let be a time oriented Lorentzian manifold and the Lorentzian
distance on . The function is the cosmological
time function of , where as usual means that is in the causal
past of . This function is called regular iff for all
and also along every past inextendible causal curve. If the
cosmological time function of a space time is regular it has
several pleasant consequences: (1) It forces to be globally hyperbolic,
(2) every point of can be connected to the initial singularity by a
rest curve (i.e., a timelike geodesic ray that maximizes the distance to the
singularity), (3) the function is a time function in the usual sense, in
particular (4) is continuous, in fact locally Lipschitz and the second
derivatives of exist almost everywhere.Comment: 19 pages, AEI preprint, latex2e with amsmath and amsth
Atomic Configuration of Nitrogen Doped Single-Walled Carbon Nanotubes
Having access to the chemical environment at the atomic level of a dopant in
a nanostructure is crucial for the understanding of its properties. We have
performed atomically-resolved electron energy-loss spectroscopy to detect
individual nitrogen dopants in single-walled carbon nanotubes and compared with
first principles calculations. We demonstrate that nitrogen doping occurs as
single atoms in different bonding configurations: graphitic-like and
pyrrolic-like substitutional nitrogen neighbouring local lattice distortion
such as Stone-Thrower-Wales defects. The stability under the electron beam of
these nanotubes has been studied in two extreme cases of nitrogen incorporation
content and configuration. These findings provide key information for the
applications of these nanostructures.Comment: 25 pages, 13 figure
Magnetoplasmon excitations in an array of periodically modulated quantum wires
Motivated by the recent experiment of Hochgraefe et al., we have investigated
the magnetoplasmon excitations in a periodic array of quantum wires with a
periodic modulation along the wire direction. The equilibrium and dynamic
properties of the system are treated self-consistently within the
Thomas-Fermi-Dirac-von Weizsaecker approximation. A calculation of the
dynamical response of the system to a far-infrared radiation field reveals a
resonant anticrossing between the Kohn mode and a finite-wavevector
longitudinal excitation which is induced by the density modulation along the
wires. Our theoretical calculations are found to be in excellent agreement with
experiment.Comment: 9 pages, 8 figure
- …