Effective Widths of Unstiffened Elements under Combined Compression and Bending

Details of a dual-actuator rig developed for testing rectangular plates simply supported on three sides, with the remaining (longitudinal) edge free, under combined uni-axial compression and in-plane bending are presented. Particular attention is given to ensuring a constant strain eccentricity to the loaded ends, as opposed to a constant load eccentricity, in order to determine the post-buckling behavior and ultimate load and moment capacities of unstiffened thin-walled elements. Strain gradients varying from pure compression to pure bending are facilitated. The plate test results are presented in the form of strength curves, and are used to establish effective width equations for the strain gradients tested. The applicability of using elastic or plastic effective widths for unstiffened elements under strain gradients is discussed

Design Provisions for Sections Containing Unstiffened Elements under Stress Gradients

Current American design provisions treat unstiffened elements under stress gradients as if they were uniformly compressed for effective width calculations. This paper presents a design method for calculating the effective width of these elements, based on plate test results. Current international codes allow the capacity of sections that contain unstiffened elements under stress gradients to be calculated on the basis of initiation of yielding in the section. A non-iterative method for the calculation of the capacity, based on inelastic reserve capacity, is presented. The method is shown to be in good agreement with experimental data of I-sections and plain channels in minor axis bending. Particular attention is given to the effect of both the elastic buckling coefficient used in the effective width method, and the use of inelastic considerations, on the bending capacity of sections that contain unstiffened elements under stress gradients

Renal colic in a dialysis patient: a case of renal stone disease

Renal colic in a dialysis patient: a case of renal stone diseas

Post-processed data and graphical tools for a CONUS-wide eddy flux evapotranspiration dataset

Large sample datasets of in situ evapotranspiration (ET) measurements with well documented data provenance and quality assurance are critical for water management and many fields of earth science research. We present a post-processed ET oriented dataset at daily and monthly timesteps, from 161 stations, including 148 eddy covariance flux towers, that were chosen based on their data quality from nearly 350 stations across the contiguous United States. In addition to ET, the data includes energy and heat fluxes, meteorological measurements, and reference ET downloaded from gridMET for each flux station. Data processing techniques were conducted in a reproducible manner using open-source software. Most data initially came from the public AmeriFlux network, however, several different networks (e.g., the USDA-Agricultural Research Service) and university partners provided data that was not yet public. Initial half-hourly energy balance data were gap-filled and aggregated to daily frequency, and turbulent fluxes were corrected for energy balance closure error using the FLUXNET2015/ONEFlux energy balance ratio approach. Metadata, diagnostics of energy balance, and interactive graphs of time series data are included for each station. Although the dataset was developed primarily to benchmark satellite-based remote sensing ET models of the OpenET initiative, there are many other potential uses, such as validation for a range of regional hydrologic and atmospheric models

Post-processed data and graphical tools for a CONUS-wide eddy flux evapotranspiration dataset

Large sample datasets of in situ evapotranspiration (ET) measurements with well documented data provenance and quality assurance are critical for water management and many fields of earth science research. We present a post-processed ET oriented dataset at daily and monthly timesteps, from 161 stations, including 148 eddy covariance flux towers, that were chosen based on their data quality from nearly 350 stations across the contiguous United States. In addition to ET, the data includes energy and heat fluxes, meteorological measurements, and reference ET downloaded from grid- MET for each flux station. Data processing techniques were conducted in a reproducible manner using open-source soft- ware. Most data initially came from the public AmeriFlux network, however, several different networks (e.g., the USDA- Agricultural Research Service) and university partners pro- vided data that was not yet public. Initial half-hourly energy balance data were gap-filled and aggregated to daily frequency, and turbulent fluxes were corrected for energy balance closure error using the FLUXNET2015/ONEFlux energy balance ratio approach. Metadata, diagnostics of energy balance, and interactive graphs of time series data are included for each station. Although the dataset was developed primarily to benchmark satellite-based remote sensing ET models of the OpenET initiative, there are many other potential uses, such as validation for a range of regional hydrologic and atmospheric models

Evaluation of strain and stress states in the single point incremental forming process

Single point incremental forming (SPIF) is a promising manufacturing process suitable for small batch production. Furthermore, the material formability is enhanced in comparison with the conventional sheet metal forming processes, resulting from the small plastic zone and the incremental nature. Nevertheless, the further development of the SPIF process requires the full understanding of the material deformation mechanism, which is of great importance for the effective process optimization. In this study, a comprehensive finite element model has been developed to analyse the state of strain and stress in the vicinity of the contact area, where the plastic deformation increases by means of the forming tool action. The numerical model is firstly validated with experimental results from a simple truncated cone of AA7075-O aluminium alloy, namely, the forming force evolution, the final thickness and the plastic strain distributions. In order to evaluate accurately the through-thickness gradients, the blank is modelled with solid finite elements. The small contact area between the forming tool and the sheet produces a negative mean stress under the tool, postponing the ductile fracture occurrence. On the other hand, the residual stresses in both circumferential and meridional directions are positive in the inner skin of the cone and negative in the outer skin. They arise predominantly along the circumferential direction due to the geometrical restrictions in this direction.The authors would like to gratefully acknowledge the financial support from the Portuguese Foundation for Science and Technology (FCT) under project PTDC/EMS-TEC/1805/2012. The first author is also grateful to the FCT for the postdoctoral grant SFRH/BPD/101334/2014.info:eu-repo/semantics/publishedVersio

Rise of the Earliest Tetrapods: An Early Devonian Origin from Marine Environment

Tetrapod fossil tracks are known from the Middle Devonian (Eifelian at ca. 397 million years ago - MYA), and their earliest bony remains from the Upper Devonian (Frasnian at 375–385 MYA). Tetrapods are now generally considered to have colonized land during the Carboniferous (i.e., after 359 MYA), which is considered to be one of the major events in the history of life. Our analysis on tetrapod evolution was performed using molecular data consisting of 13 proteins from 17 species and different paleontological data. The analysis on the molecular data was performed with the program TreeSAAP and the results were analyzed to see if they had implications on the paleontological data collected. The results have shown that tetrapods evolved from marine environments during times of higher oxygen levels. The change in environmental conditions played a major role in their evolution. According to our analysis this evolution occurred at about 397–416 MYA during the Early Devonian unlike previously thought. This idea is supported by various environmental factors such as sea levels and oxygen rate, and biotic factors such as biodiversity of arthropods and coral reefs. The molecular data also strongly supports lungfish as tetrapod's closest living relative

The Origin and Initial Rise of Pelagic Cephalopods in the Ordovician

BACKGROUND: During the Ordovician the global diversity increased dramatically at family, genus and species levels. Partially the diversification is explained by an increased nutrient, and phytoplankton availability in the open water. Cephalopods are among the top predators of today's open oceans. Their Ordovician occurrences, diversity evolution and abundance pattern potentially provides information on the evolution of the pelagic food chain. METHODOLOGY/PRINCIPAL FINDINGS: We reconstructed the cephalopod departure from originally exclusively neritic habitats into the pelagic zone by the compilation of occurrence data in offshore paleoenvironments from the Paleobiology Database, and from own data, by evidence of the functional morphology, and the taphonomy of selected cephalopod faunas. The occurrence data show, that cephalopod associations in offshore depositional settings and black shales are characterized by a specific composition, often dominated by orthocerids and lituitids. The siphuncle and conch form of these cephalopods indicate a dominant lifestyle as pelagic, vertical migrants. The frequency distribution of conch sizes and the pattern of epibionts indicate an autochthonous origin of the majority of orthocerid and lituitid shells. The consistent concentration of these cephalopods in deep subtidal sediments, starting from the middle Tremadocian indicates the occupation of the pelagic zone early in the Early Ordovician and a subsequent diversification which peaked during the Darriwilian. CONCLUSIONS/SIGNIFICANCE: The exploitation of the pelagic realm started synchronously in several independent invertebrate clades during the latest Cambrian to Middle Ordovician. The initial rise and diversification of pelagic cephalopods during the Early and Middle Ordovician indicates the establishment of a pelagic food chain sustainable enough for the development of a diverse fauna of large predators. The earliest pelagic cephalopods were slowly swimming vertical migrants. The appearance and early diversification of pelagic cephalopods is interpreted as a consequence of the increased food availability in the open water since the latest Cambrian

STAGES IN THE ORIGIN OF VERTEBRATES: ANALYSIS BY MEANS OF SCENARIOS

Vertebrates lack an epidermal nerve plexus. This feature is common to many invertebrates from which vertebrates differ by an extensive set of shared-derived characters (synapomorphies) derived from the neural crest and epidermal neurogenic placodes. Hence, the hypothesis that the developmental precursor of the epidermal nerve plexus may be homologous to the neural crest and epidermal neurogenic placodes. This account attempts to generate a nested set of scenarios for the prevertebrate-vertebrate transition, associating a presumed sequence of behavioural and environmental changes with the observed phenotypic ones. Toward this end, it integrates morphological, developmental, functional (physiological/behavioural) and some ecological data, as many phenotypic shifts apparently involved associated transitions in several aspects of the animals. The scenarios deal with the origin of embryonic and adult tissues and such major organs as the notochord, the CNS, gills and kidneys and propose a sequence of associated changes. Alternative scenarios are stated as the evidence often remains insufficient for decision. The analysis points to gaps in comprehension of the biology of the animals and therefore suggests further research.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72629/1/j.1469-185X.1989.tb00471.x.pd