12,820 research outputs found
Suppression of combustion oscillations with mechanical devices Interim report
Static rocket thrust chamber simulator for cylindrical cold flow-type apparatus desig
Void Formation Study of Flip Chip in Package Using No-Flow Underfill
©2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or distribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.DOI: 10.1109/TEPM.2008.2002951The advanced flip chip in package (FCIP) process using no-flow underfill material for high I/O density and fine-pitch interconnect applications presents challenges for an assembly process that must achieve high electrical interconnect yield and high reliability performance. With respect to high reliability, the voids formed in the underfill between solder bumps or inside the solder bumps during the no-flow underfill assembly process of FCIP devices have been typically considered one of the critical concerns affecting assembly yield and reliability performance. In this paper, the plausible causes of underfill void formation in FCIP using no-flow underfill were investigated through systematic experimentation with different types of test vehicles. For instance, the effects of process conditions, material properties, and chemical reaction between the solder bumps and no-flow underfill materials on the void formation behaviors were investigated in advanced FCIP assemblies. In this investigation, the chemical reaction between solder and underfill during the solder wetting and underfill cure process has been found to be one of the most significant factors for void formation in high I/O and fine-pitch FCIP assembly using no-flow underfill materials
Zero-Bias Anomalies in Narrow Tunnel Junctions in the Quantum Hall Regime
We report on the study of cleaved-edge-overgrown line junctions with a
serendipitously created narrow opening in an otherwise thin, precise line
barrier. Two sets of zero-bias anomalies are observed with an enhanced
conductance for filling factors and a strongly suppressed conductance
for . A transition between the two behaviors is found near . The zero-bias anomaly (ZBA) line shapes find explanation in
Luttinger liquid models of tunneling between quantum Hall edge states. The ZBA
for occurs from strong backscattering induced by suppression of
quasiparticle tunneling between the edge channels for the Landau
levels. The ZBA for arises from weak tunneling of quasiparticles
between the edge channels.Comment: version with edits for clarit
Experimental study of optimal measurements for quantum state tomography
Quantum tomography is a critically important tool to evaluate quantum
hardware, making it essential to develop optimized measurement strategies that
are both accurate and efficient. We compare a variety of strategies using
nearly pure test states. Those that are informationally complete for all states
are found to be accurate and reliable even in the presence of errors in the
measurements themselves, while those designed to be complete only for pure
states are far more efficient but highly sensitive to such errors. Our results
highlight the unavoidable tradeoffs inherent to quantum tomography.Comment: 5 pages, 3 figure
What thermodynamic features characterize good and bad folders? Results from a simplified off-lattice protein model
The thermodynamics of the small SH3 protein domain is studied by means of a
simplified model where each bead-like amino acid interacts with the others
through a contact potential controlled by a 20x20 random matrix. Good folding
sequences, characterized by a low native energy, display three main
thermodynamical phases, namely a coil-like phase, an unfolded globule and a
folded phase (plus other two phases, namely frozen and random coil, populated
only at extremes temperatures). Interestingly, the unfolded globule has some
regions already structured. Poorly designed sequences, on the other hand,
display a wide transition from the random coil to a frozen state. The
comparison with the analytic theory of heteropolymers is discussed
Tumour rejection in rats sensitized to embryonic tissue. I. Rejection of tumour cells implanted s.c. and detection of cytotoxic lymphoid cells.
Wistar rats were sensitized to rat embryonic tissue by immunization with irradiated (5000 rad) rat embryo cells (2 X 10(6) s.c. + 1 X 10(6) i.p.) derived from embryos aged 14-15 days, or by implantation of irradiated (5000 rad) tissue grafts from these embryos. Three to five immunizations were given at weekly intervals, and the rats were then challenged subcutaneously 7-10 days after the final inoculum with minimal tumour-producing tumour cell doses. Immunization with irradiated rat embryo cells failed to influence the growth and development of tumour cells prepared from hepatoma D23 and D30, sarcoma Mc57, mammary carcinoma AAF57 or cells prepared from spontaneously arising mammary carcinomata Sp4 and Sp15. Using adoptive transfer techniques, lymphoid cells from embryo-sensitized rats, when used in a 3000 : 1 ratio (lymphoid cells : tumour cells), were shown effectively to retard the growth of hepatoma D23 in 3 out of 7 experiments performed. Similar adoptive transfer procedures proved ineffective in preventing the growth of mammary carcinoma AAF57. Using in vitro cytotoxicity tests, lymph node cells and spleen cells from embryo-immunized rats were shown to be cytotoxic for several rat tumour cell targets : hepatoma D23 (7/10 tests), sarcoma Mc7 (8/12 tests), mammary carcinoma AAF57 (2/2 tests) and Sp4 (3/4 tests), and for 14-15-day-old rat embryo cells (5/10 tests). In comparative tests lymphoid cells were relatively non-cytotoxic for 20-day-old rat embryo cells (1/6 tests) or cells prepared from adult rat lung or kidney (1/10 tests). The role of embryonic antigen(s) in tumour rejection is discussed
Communication skills teaching for student dietitians using experiential learning and simulated patients
Ferromagnetic resonance force microscopy on a thin permalloy film
Ferromagnetic Resonance Force Microscopy (FMRFM) offers a means of performing
local ferromagnetic resonance. We have studied the evolution of the FMRFM force
spectra in a continuous 50 nm thick permalloy film as a function of probe-film
distance and performed numerical simulations of the intensity of the FMRFM
probe-film interaction force, accounting for the presence of the localized
strongly nonuniform magnetic field of the FMRFM probe magnet. Excellent
agreement between the experimental data and the simulation results provides
insight into the mechanism of FMR mode excitation in an FMRFM experiment.Comment: 9 pages, 2 figure
VetCompass Australia: A National Big Data Collection System for Veterinary Science
VetCompass Australia is veterinary medical records-based research coordinated with the global VetCompass endeavor to maximize its quality and effectiveness for Australian companion animals (cats, dogs, and horses). Bringing together all seven Australian veterinary schools, it is the first nationwide surveillance system collating clinical records on companion-animal diseases and treatments. VetCompass data service collects and aggregates real-time, clinical records for researchers to interrogate, delivering sustainable and cost-effective access to data from hundreds of veterinary practitioners nationwide. Analysis of these clinical records will reveal geographical and temporal trends in the prevalence of inherited and acquired diseases, identify frequently prescribed treatments, revolutionize clinical auditing, help the veterinary profession to rank research priorities, and assure evidence-based companion-animal curricula in veterinary schools. VetCompass Australia will progress in three phases: (1) roll-out of the VetCompass platform to harvest Australian veterinary clinical record data; (2) development and enrichment of the coding (data-presentation) platform; and (3) creation of a world-first, real-time surveillance interface with natural language processing (NLP) technology. The first of these three phases is described in the current article. Advances in the collection and sharing of records from numerous practices will enable veterinary professionals to deliver a vastly improved level of care for companion animals that will improve their quality of life
- …