Structural and electrochemical properties of electrodeposited Ni-P nanocomposite coatings containing mixed ceramic oxide particles

Mixed oxide ceramic particles were incorporated into Ni-P matrix to synthesize Ni-P-TiO2-CeO2 nanocomposite coatings. In the present study, the effect of concentration of mixed oxide ceramic particles (TiO2 and CeO2) on structural, surface and electrochemical properties of Ni-P coating is investigated. The coatings were electrodeposited on mild steel substrate and were then characterized using various techniques. The compositional (EDAX) confirms the co-deposition of TiO2 and CeO2ceramic particles into Ni-P matrix. The structural analysis (XRD) indicates that addition of mixed oxide ceramic particles do not have any prominent influence on the structure of Ni-P coatings as parent amorphous structure is preserved even at high concentration of mixed ceramic particles (7.5 g/l). The SEM and AFM analyses indicate that the synthesized coatings are of fine nodular morphology containing uniformly distributed ceramic particles. However, their excessive amount may lead to agglomeration and surface defects. The surface analysis (AFM) also indicates that the surface roughness increases with the increase in amount of TiO2 and CeO2 particles. The enhancement in roughness of coatings can be ascribed to the fact the added ceramic particles are hard and remain insoluble in the Ni-P matrix. The potentiodynamic polarization analysis confirms that incorporation of mixed oxide ceramic particles into Ni-P matrix improves its anticorrosion properties. However, their excessive amount may cause decrease in corrosion resistance due to formation of galvanic cells at the defective metal/coating interface.Scopu

Improvement in properties of Ni-B coatings by the addition of mixed oxide nanoparticles

A comparison of properties of electrodeposited Ni-B and Ni-B-ZrO2-Al2O3 nanocomposite coatings is presented to explain the benefits of addition of mixed nanoparticles of ZrO2 and Al2O3 into Ni-B matrix. A comparative study of the properties of Ni-B and Ni-B-ZrO2-Al2O3 nanocomposite coatings in their as deposited condition indicates that the addition of mixed nanoparticles into Ni-B matrix has significant influence on its structural, surface, mechanical and electrochemical properties. Incorporation of mixed nanoparticles into Ni-B matrix shows significant grain refinement, substantial enhancement in mechanical properties and decent improvement in corrosion resistance. The improvement in mechanical properties can be attributed to grain refinement of Ni-B matrix and dispersion hardening effect of insoluble hard ceramic nanoparticles. Similarly, corrosion inhibition efficiency of binary Ni-B coatings is considerably improved which can be presumably regarded as the effect of formation of dense structure and decrease in active area of Ni-B matrix due to incorporation of mixed inactive nanoparticles. There is simultaneous improvement in mechanical and anti-corrosion properties of Ni-B coatings by the incorporation of mixed nanoparticles demonstrating usefulness of Ni-B-ZrO2-Al2O3 nanocomposite coatings for many applications.Scopu

Highly efficient eco-friendly corrosion inhibitor for mild steel in 5 M HCl at elevated temperatures: experimental & molecular dynamics study

Laurhydrazide N?-propan-3-one was used as an eco-friendly inhibitor for the corrosion of mild steel in 5 M HCl at elevated temperatures. Various electrochemical techniques and surface characterization methods were utilized in this study. In addition, the kinetics and thermodynamic parameters were calculated and discussed. Furthermore, a geometry optimization of LHP was performed and the time-dependent density functional theory was utilized to calculate the electronic absorption spectra. Finally, frequency calculations were, also, performed on the optimized geometry. - 2019, The Author(s).This publication was supported by Qatar University Internal Grant No. GCC-2017-012. The findings achieved herein are solely the responsibility of the authors. Additionally, the authors thank the Center for Advanced Materials at Qatar University for their support.Scopu

Microwave Assisted Synthesis Of Binary Metallic Oxides For Catalysis Applications

Herein, versatile, and reproducible method to prepare binary metal oxides via microwave assisted synthesis. Catalysts are substances that basically speeds up chemical reactions. Ideally, bonds are formed between the catalysts and the reactants. Also, catalysts permit formation of products from the reactants. These formed products, splits off the catalyst without affecting or changing it. Catalytic kinetics studies the correlate chemical reaction rate with some properties of reactants and/or products for instance, temperature, concentration and pressure. The aim of the project is to prepare pure and bi-metal iron-based catalyst by co-precipitation method and to characterize the prepared sample using X-ray diffraction. Metal oxides nanoparticles is a field of interest in catalysis, such that these oxides are used to oxidize carbon monoxide. The samples were prepared through co-precipitation method in laboratory scale. The metals used was copper, iron and cobalt. After preparing pure sample of each metal a mix of two metals were introduced in different ratios. The samples were characterized via X-ray diffraction (XRD) and then the results were compared to exist data introduced from others research, the prepared samples XRD was having a great matching with the data retrieved from internet and we found that the metal could exist in two form of oxides and even could exist as pure metal. Each peak in the XRD figure could indicate one or more phase of the metal

AEO7 Surfactant as an Eco-Friendly Corrosion Inhibitor for Carbon Steel in HCl solution

The impact of AEO7 surfactant on the corrosion inhibition of carbon steel (C-steel) in 0.5 M HCl solution at temperatures between 20 °C and 50 °C was elucidated using weight loss and different electrochemical techniques. The kinetics and thermodynamic parameters of the corrosion and inhibition processes were reported. The corrosion inhibition efficiency (IE%) improved as the concentration of AEO7 increased. In addition, a synergistic effect was observed when a concentration of 1 × 10 −3 mol L −1 or higher of potassium iodide (KI) was added to 40 µmol L −1 of the AEO7 inhibitor where the corrosion IE% increased from 87.4% to 99.2%. Also, it was found that the adsorption of AEO7 surfactant on C-steel surface followed the Freundlich isotherm. Furthermore, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements indicated that AEO7 was physically adsorbed on the steel surface. The surface topography was examined using an optical profilometer, an atomic force microscope (AFM), and a scanning electron-microscope (SEM) coupled with an energy dispersion X-ray (EDX) unit. Quantum chemical calculations based on the density functional theory were performed to understand the relationship between the corrosion IE% and the molecular structure of the AEO7 molecule. © 2019, The Author(s).This publication was supported by Qatar University Internal Grant N° GCC-2017-012. The findings achieved herein are solely the responsibility of the authors. The authors gratefully thank the Center for Advanced Materials at Qatar University and the Chemistry Department at Cairo University for their support. The permanent address of Dr. Mohamed F. Shibl is Chemistry Department, Faculty of Science, Cairo University, Giza 12613, Egypt.Scopu

UV Induced Photodegradation of Direct Green dye by Tb-doped La10Si6O27 Catalyst

Due to the expansion of industry, the world's population growth has led to increased air and water contamination. Because they are poisonous and non-biodegradable, organic dyes are a significant source of this contamination. Studies have concentrated on photocatalysts to transform organic dyes into innocuous compounds in order to lessen the harm that organic colours cause. In this study, solution combustion technique was employed to prepare rare-earth metal (terbium (Tb)) doped lanthanum silicate phosphor (La10Si6O27) using lanthanum nitrate and fumed silica were utilized as precursors, oxalyldihydrazide was used as fuel, and terbium nitrate was used as a dopant. The photocatalytic activities for the Direct Green-23 (DG23) dye degradation under UV irradiation were studied and found that 59.05% of dyes degraded at 120 min. These findings shows that, La10Si6O27 is a promising material for industrial dye degradation since 59.05% of the dyes were absorbed by the material in 120 min.This work was supported by Qatar University through a National Capacity Building Program Grant (NCBP), [QUCP-CAM-2022-463]. The publication of the article was funded by Qatar National Library

An efficient green ionic liquid for the corrosion inhibition of reinforcement steel in neutral and alkaline highly saline simulated concrete pore solutions

The effect of the green ionic liquid compound, Quaternium-32 (Q-32), on the corrosion inhibition performance of reinforcement steel, in a simulated concrete pore solution, was investigated at different temperatures and pH values, using electrochemical impedance spectroscopy (EIS). The inhibition efficiency was improved as the concentration of Q-32 and pH values were increased. However, it decreased as the temperature was raised. A Q-32 concentration of 20 µmol L–1 exhibited a 94% inhibition efficiency at 20 °C. The adsorption isotherm was evaluated using EIS measurements, and it was found to obey the Langmuir isotherm. The surface topography was examined using an atomic force microscope and scanning electron microscope. The effect of the Q-32 concentration with the highest corrosion efficiency on the mechanical properties of the mortars was also explained by flexure and compression techniques.The authors express their gratitude to the Center for Advanced Materials at Qatar University for technical support. Additionally, the authors are grateful to Qatar University for funding this work through the QUCG-CAM-20/21-2 Grant. The publication of this article was funded by the Qatar National Library

Anti-corrosive and oil sensitive coatings based on epoxy/polyaniline/magnetite-clay composites through diazonium interfacial chemistry

Epoxy polymer nanocomposites filled with magnetite (Fe3O4) clay (B), named (B-DPA-PANI@Fe3O4) have been prepared at different filler loading (0.1, 0.5, 1, 3, 5 wt. %). The surface modification of clay by polyaniline (PANI) is achieved in the presence of 4-diphenylamine diazonium salt (DPA). The effects of the nanofiller loading on Tensile, mechanical and dielectric properties were systematically studied. Improved properties was highlighted for all reinforced samples. The addition of only 3 wt. % of the filler enhanced the tensile strength of the composites by 256%, and the glass transition temperature Tg by 37%. The dielectric spectra over a broad frequency showed a robust interface between the hybrid (B-DPA-PANI@Fe3O4) fillers and epoxy matrix. The results showed most significant improvement in corrosion inhibition using electrochemical impedance spectroscopy (EIS) in 3.5 wt % NaCl, as well as a significant response in oil sensing test. High charge transfer resistance of 110 × 106 Ω.cm2 using 3-wt % of filler was noted compared to 0.35 × 106 Ω.cm2 for the pure epoxy. The results obtained herein will open new routes for the preparation of efficient anticorrosion sensor coatings. © 2018, The Author(s).NPRP Award from the Qatar National Research Fund (a member of Qatar Foundation) [8-878-1-172

Electrochemical and thermodynamic study on the corrosion performance of API X120 steel in 3.5% NaCl solution

The present work studied the effect of temperature on the corrosion behavior of API X120 steel in a saline solution saturated with CO2 in absence and presence of polyethyleneimine (PEI) as an environmentally safe green inhibitor. The effect of PEI on the corrosion behavior of API X120 steel was investigated using destructive and non-destructive electrochemical techniques. The overall results revealed that PEI significantly decreases the corrosion rate of API X120 steel with inhibition efficiency of 94% at a concentration of 100 μmol L−1. The adsorption isotherm, activation energy and the thermodynamic parameters were deduced from the electrochemical results. It is revealed that the adsorption of PEI on API X120 steel surface follows Langmuir adsorption isotherm adopting a Physi-chemisorption mechanism. Finally, the samples were characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques to elucidate the effect of aggressiveness of corrosive media on the surface morphology and the corrosion performance of API X120 steel. The surface topography result indicates that the API X120 steel interface in PEI presence is smoother than CO2 with Cl− ions or Cl− ions only. This is attributed to the compact protective film limits the aggressive ions transfer towards the metallic surface and reduces the corrosion rate. Moreover, PEI inhibition mechanism is based on its CO2 capturing ability and the PEI adsorption on the steel surface beside the siderite layer which give the PEI molecules the ability to reduce the scale formation and increase the corrosion protection due to capturing the CO2 from the brine solution

Organ-specific toxicity evaluation of stearamidopropyl dimethylamine (SAPDMA) surfactant using zebrafish embryos

Surfactants are widely used in the industry of detergents, household products, and cosmetics. SAPDMA is a cationic surfactant that is used mostly in cosmetics, conditioning agents and has recently gained attention as a corrosion inhibitor in the sea pipelines industry. In this regard, literature concerning the ecotoxicological classification of SAPDMA on aquatic animals is lacking. This study aims to evaluate the potential ecotoxicity of SAPDMA using the aquatic zebrafish embryo model. The potential toxic effects of SAPDMA were assessed by different assays. This includes (i) mortality/survival assay to assess the median lethal concentration (LC50); (ii) teratogenicity assay to assess the no observed effect concentration (NOEC); (iii) organ-specific toxicity assays including cardiotoxicity, neurotoxicity (using locomotion assay), hematopoietic toxicity (hemoglobin synthesis using o-dianisidine staining), hepatotoxicity (liver steatosis and yolk retention using Oil Red O (ORO) stain); (iv) cellular cytotoxicity (mitochondrial membrane potential) by measuring the accumulation of JC-1 dye into mitochondria. Exposure of embryos to SAPDMA caused mortality in a dose-dependent manner with a calculated LC50 of 2.3 mg/L. Thus, based on the LC50 value and according to the Fish and Wildlife Service (FWS) Acute Toxicity Rating Scale, SAPDMA is classified as “moderately toxic”. The No Observed Effect Concentration (NOEC) concerning a set of parameters including scoliosis, changes in body length, yolk, and eye sizes was 0.1 mg/L. At the same NOEC concentration (0.1 mg/L), no organ-specific toxicity was detected in fish treated with SAPDMA, except hepatomegaly with no associated liver dysfunctions. However, higher SAPDMA concentrations (0.8 mg/L) have dramatic effects on zebrafish organ development (eye, heart, and liver development). Our data recommend a re-evaluation of the SAPDMA employment in the industry setting and its strictly monitoring by environmental and public health agencies