Assessing the Contribution of Heme-Iron Acquisition to Staphylococcus aureus Pneumonia Using Computed Tomography

S. aureus acquires heme-iron using the iron regulated surface determinant (Isd) system and the heme transport system (Hts) with both systems showing critical importance in systemic models of infection. The contribution of heme-iron acquisition to staphylococcal pneumonia has not yet been elucidated. In addition, the use of computed tomography (CT) for the evaluation of staphylococcal pneumonia and its correlation to pathologic examination of infected lung tissue has not been performed to date. We have applied CT-based imaging to a murine model of staphylococcal pneumonia to determine the virulence contribution of heme-iron acquisition through the Hts and Isd systems.Mice were intranasally inoculated with approximately 1.0 x 10(8) colony forming units (CFU) of S. aureus. Lungs from mice infected with wild type S. aureus or strains deficient in isdB and isdH (DeltaisdBH) or htsA and isdE (DeltahtsADeltaisdE) were harvested at 24 hours. Histology, radiographic appearance by computed tomography (CT), percent mortality and bacterial burden were evaluated. Infection with S. aureus DeltaisdBH and DeltahtsADeltaisdE did not result in a statistically significant difference in mortality or bacterial burden as compared to controls. CT imaging of infected mice also did not reveal an appreciable difference between the various strains when compared to wild type, but did correlate with pathologic findings of pneumonia. However, a systemic model of infection using the DeltahtsADeltaisdE strain revealed a statistically significant decrease in bacterial burden in the lung, heart and kidneys.The development of staphylococcal pneumonia in this murine model is not dependent on hemoglobin binding or heme-iron uptake into S. aureus. However, this model does reveal that heme-iron acquisition contributes to the pathogenesis of systemic staphylococcal infections. In addition, CT imaging of murine lungs is an attractive adjunct to histologic analysis for the confirmation and staging of pneumonia

Analogue peptides for the immunotherapy of human acute myeloid leukemia

Accepted manuscript. The final publication is available at: http://link.springer.com/article/10.1007%2Fs00262-015-1762-9The use of peptide vaccines, enhanced by adjuvants, has shown some efficacy in clinical trials. However, responses are often short-lived and rarely induce notable memory responses. The reason is that self-antigens have already been presented to the immune system as the tumor develops, leading to tolerance or some degree of host tumor cell destruction. To try to break tolerance against self-antigens, one of the methods employed has been to modify peptides at the anchor residues to enhance their ability to bind major histocompatibility complex molecules, extending their exposure to the T-cell receptor. These modified or analogue peptides have been investigated as stimulators of the immune system in patients with different cancers with variable but sometimes notable success. In this review we describe the background and recent developments in the use of analogue peptides for the immunotherapy of acute myeloid leukemia describing knowledge useful for the application of analogue peptide treatments for other malignancies

Tailoring force sensitivity and selectivity by microstructure engineering of multidirectional electronic skins

Electronic skins (e-skins) with high sensitivity to multidirectional mechanical stimuli are crucial for healthcare monitoring devices, robotics, and wearable sensors. In this study, we present piezoresistive e-skins with tunable force sensitivity and selectivity to multidirectional forces through the engineered microstructure geometries (i.e., dome, pyramid, and pillar). Depending on the microstructure geometry, distinct variations in contact area and localized stress distribution are observed under different mechanical forces (i.e., normal, shear, stretching, and bending), which critically affect the force sensitivity, selectivity, response/relaxation time, and mechanical stability of e-skins. Microdome structures present the best force sensitivities for normal, tensile, and bending stresses. In particular, microdome structures exhibit extremely high pressure sensitivities over broad pressure ranges (47,062 kPa(-1) in the range of < 1 kPa, 90,657 kPa(-1) in the range of 1-10 kPa, and 30,214 kPa(-1) in the range of 10-26 kPa). On the other hand, for shear stress, micropillar structures exhibit the highest sensitivity. As proof-of-concept applications in healthcare monitoring devices, we show that our e-skins can precisely monitor acoustic waves, breathing, and human artery/carotid pulse pressures. Unveiling the relationship between the microstructure geometry of e-skins and their sensing capability would provide a platform for future development of high-performance microstructured e-skins

Siglecg Limits the Size of B1a B Cell Lineage by Down-Regulating NFκB Activation

BACKGROUND: B1 B cells are believed to be a unique lineage with a distinct developmental pathway, function and activation requirement. How this lineage is genetically determined remained largely obscure. METHODS AND PRINCIPAL FINDINGS: Using the Siglecg-deficient mice with a knockin of green-fluorescent protein encoding sequence, we show here that, although the Siglecg gene is broadly expressed at high levels in all stages and/or lineages of B cells tested and at lower levels in other lineages, its deletion selectively expanded the B1a B cell lineages, including the frequency of the B1 cell progenitor in the bone marrow and the number of B1a cells in the peritoneal cavity, by postnatal expansion. The expansion of B1a B cells in the peritoneal correlated with enhanced activation of NFkappaB and was ablated by an IKK inhibitor. CONCLUSION AND SIGNIFICANCE: Our data revealed a critical role for Siglec G-NFkappaB pathway in regulating B1a B cell lineage. These data lead to a novel model of B1a lineage development that explains a large array of genetic data in this field

The Na+/H+ Exchanger Controls Deoxycholic Acid-Induced Apoptosis by a H+-Activated, Na+-Dependent Ionic Shift in Esophageal Cells

Apoptosis resistance is a hallmark of cancer cells. Typically, bile acids induce apoptosis. However during gastrointestinal (GI) tumorigenesis the cancer cells develop resistance to bile acid-induced cell death. To understand how bile acids induce apoptosis resistance we first need to identify the molecular pathways that initiate apoptosis in response to bile acid exposure. In this study we examined the mechanism of deoxycholic acid (DCA)-induced apoptosis, specifically the role of Na+/H+ exchanger (NHE) and Na+ influx in esophageal cells. In vitro studies revealed that the exposure of esophageal cells (JH-EsoAd1, CP-A) to DCA (0.2 mM -0.5 mM) caused lysosomal membrane perturbation and transient cytoplasmic acidification. Fluorescence microscopy in conjunction with atomic absorption spectrophotometry demonstrated that this effect on lysosomes correlated with influx of Na+, subsequent loss of intracellular K+, an increase of Ca2+ and apoptosis. However, ethylisopropyl-amiloride (EIPA), a selective inhibitor of NHE, prevented Na+, K+ and Ca2+ changes and caspase 3/7 activation induced by DCA. Ouabain and amphotericin B, two drugs that increase intracellular Na+ levels, induced similar changes as DCA (ion imbalance, caspase3/7 activation). On the contrary, DCA-induced cell death was inhibited by medium with low a Na+ concentrations. In the same experiments, we exposed rat ileum ex-vivo to DCA with or without EIPA. Severe tissue damage and caspase-3 activation was observed after DCA treatment, but EIPA almost fully prevented this response. In summary, NHE-mediated Na+ influx is a critical step leading to DCA-induced apoptosis. Cells tolerate acidification but evade DCA-induced apoptosis if NHE is inhibited. Our data suggests that suppression of NHE by endogenous or exogenous inhibitors may lead to apoptosis resistance during GI tumorigenesis

Wearable high-performance pressure sensors based on three-dimensional electrospun conductive nanofibers

Polymer-based pressure sensors play a key role in realizing lightweight and inexpensive wearable devices for healthcare and environmental monitoring systems. Here, conductive core/shell polymer nanofibers composed of poly (vinylidene fluoride-co-hexafluoropropene) (PVDF-HFP)/poly(3,4-ethylenedioxythiophene) (PEDOT) are fabricated using three-dimensional (3D) electrospinning and vapor deposition polymerization methods, and the resulting sponge-like 3D membranes are used to create piezoresistive-type pressure sensors. Interestingly, the PEDOT shell consists of well-dispersed spherical bumps, leading to the formation of a hierarchical conductive surface that enhances the sensitivity to external pressure. The sponge-like 3D mats exhibit a much higher pressure sensitivity than the conventional electrospun 2D mats due to their enhanced porosity and pressure-tunable contact area. Furthermore, large-area, wireless, 16 x 10 multiarray pressure sensors for the spatiotemporal mapping of multiple pressure points and wearable bands for monitoring blood pressure have been fabricated from these 3D mats. To the best of our knowledge, this is the first report of the fabrication of electrospun 3D membranes with nanoscopically engineered fibers that can detect changes in external pressure with high sensitivity. The developed method opens a new route to the mass production of polymer-based pressure sensors with high mechanical durability, which creates additional possibilities for the development of human-machine interfaces.11Ysciescopu

An alternative route for the synthesis of silicon nanowires via porous anodic alumina masks

Amorphous Si nanowires have been directly synthesized by a thermal processing of Si substrates. This method involves the deposition of an anodic aluminum oxide mask on a crystalline Si (100) substrate. Fe, Au, and Pt thin films with thicknesses of ca. 30 nm deposited on the anodic aluminum oxide-Si substrates have been used as catalysts. During the thermal treatment of the samples, thin films of the metal catalysts are transformed in small nanoparticles incorporated within the pore structure of the anodic aluminum oxide mask, directly in contact with the Si substrate. These homogeneously distributed metal nanoparticles are responsible for the growth of Si nanowires with regular diameter by a simple heating process at 800°C in an Ar-H2 atmosphere and without an additional Si source. The synthesized Si nanowires have been characterized by field emission scanning electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman

Futures trading, spot price volatility and market efficiency: evidence from European real estate securities futures

In 2007 futures contracts were introduced based upon the listed real estate market in Europe. Following their launch they have received increasing attention from property investors, however, few studies have considered the impact their introduction has had. This study considers two key elements. Firstly, a traditional Generalized Autoregressive Conditional Heteroskedasticity (GARCH) model, the approach of Bessembinder & Seguin (1992) and the Gray’s (1996) Markov-switching-GARCH model are used to examine the impact of futures trading on the European real estate securities market. The results show that futures trading did not destabilize the underlying listed market. Importantly, the results also reveal that the introduction of a futures market has improved the speed and quality of information flowing to the spot market. Secondly, we assess the hedging effectiveness of the contracts using two alternative strategies (naïve and Ordinary Least Squares models). The empirical results also show that the contracts are effective hedging instruments, leading to a reduction in risk of 64 %