634 research outputs found
Sources of End Zone Cracking of Pretensioned Concrete Girders
Recent developments of high performance concrete, increasing amounts of prestressing, and increasing use of deep girders have resulted in increasing popularity of precast pretensioned concrete girders in bridge construction. These developments have increasingly contributed to end zone cracking. This paper summarizes the interim results of an ongoing research sponsored by the National Cooperative Highway Research Program (NCHRP) Project 18-14. The objectives of the research are: (1) to establish procedures for the acceptance, repair, or rejection of precast/prestressed concrete girders with longitudinal web cracking, and (2) to prepare a user\u27s manual for the application of these procedures. The results from a national survey of fabricators and users of pretensioned concrete girders and an extensive literature review are presented in this paper
Determination of the spin Hall angle, spin mixing conductance and spin diffusion length in Ir/CoFeB for spin-orbitronic devices
Iridium is a very promising material for spintronic applications due to its
interesting magnetic properties such as large RKKY exchange coupling as well as
its large spin-orbit coupling value. Ir is for instance used as a spacer layer
for perpendicular synthetic antiferromagnetic or ferrimagnet systems. However,
only a few studies of the spintronic parameters of this material have been
reported. In this paper, we present inverse spin Hall effect - spin pumping
ferromagnetic resonance measurements on CoFeB/Ir based bilayers to estimate the
values of the effective spin Hall angle, the spin diffusion length within
iridium, and the spin mixing conductance in the CoFeB/Ir bilayer. In order to
have reliable results, we performed the same experiments on CoFeB/Pt bilayers,
which behavior is well known due to numerous reported studies. Our experimental
results show that the spin diffusion length within iridium is 1.3 nm for
resistivity of 250 n.m, the spin mixing conductance of the CoFeB/Ir interface is 30 nm, and the spin Hall angle
of iridium has the same sign than the one of platinum and is evaluated at 26%
of the one of platinum. The value of the spin Hall angle found is 7.7% for Pt
and 2% for Ir. These relevant parameters shall be useful to consider Ir in new
concepts and devices combining spin-orbit torque and spin-transfer torque.Comment: 8 pages, 4 figure
Noninvasive electrocardiographic imaging of dynamic atrioventricular delay programming in a patient with left bundle branch block
Introduction
The response to cardiac resynchronization therapy (CRT) is determined by various factors, including left ventricular (LV) lead location, atrioventricular (AV) delay, and inter-/intraventricular delays. Advances in quadripolar lead technology and device algorithms have improved patient response, yet selection of optimal settings remains challenging. Studies have shown acute improvement in electrical synchrony with manual AV optimization by fusion optimized intervals1,2; automated device algorithms, for example AdaptivCRT (Medtronic, Minneapolis, MN),3 SmartDelay (Boston Scientific, Marlborough, MA),4 and SyncAVTM (Abbott, Sylmar, CA)5; and pacing from multiple LV lead electrodes with MultiPoint Pacing (MPP).6,7 The aim of this clinical case report was to evaluate the acute benefits of SyncAV Plus in the new-generation, Bluetooth-enabled GallantTM CRT device (Abbott, Sylmar, CA). SyncAV Plus continually programs the paced AV delay shorter than the intrinsic PR interval by a programmable offset (% of PR duration) to synchronize intrinsic and ventricular paced activation wavefronts. Twelve-lead electrocardiogram (ECG) and noninvasive electrocardiographic imaging (ECGi) epicardial mapping analyses were performed to characterize the impact of SyncAV Plus on electrical synchrony during a range of CRT programming strategies, including biventricular (BiV) pacing, MPP, LV-only pacing, and LV-only pacing with MPP
Si-compatible candidates for high-K dielectrics with the Pbnm perovskite structure
We analyze both experimentally (where possible) and theoretically from
first-principles the dielectric tensor components and crystal structure of five
classes of Pbnm perovskites. All of these materials are believed to be stable
on silicon and are therefore promising candidates for high-K dielectrics. We
also analyze the structure of these materials with various simple models,
decompose the lattice contribution to the dielectric tensor into force constant
matrix eigenmode contributions, explore a peculiar correlation between
structural and dielectric anisotropies in these compounds and give phonon
frequencies and infrared activities of those modes that are infrared-active. We
find that CaZrO_3, SrZrO_3, LaHoO_3, and LaYO_3 are among the most promising
candidates for high-K dielectrics among the compounds we considered.Comment: 17 pages, 9 figures, 4 tables. Supplementary information:
http://link.aps.org/supplemental/10.1103/PhysRevB.82.064101 or
http://www.physics.rutgers.edu/~sinisa/highk/supp.pd
Détermination acoustique de la transition à l'écoulement laminaire du gaz plasmagène d'une torche à plasma
Early Changes in Tumor Perfusion from T1-Weighted Dynamic Contrast-Enhanced MRI following Neural Stem Cell-Mediated Therapy of Recurrent High-Grade Glioma Correlate with Overall Survival
Background. The aim of this study was to correlate T1-weighted dynamic contrast-enhanced MRI- (DCE-MRI-) derived perfusion parameters with overall survival of recurrent high-grade glioma patients who received neural stem cell- (NSC-) mediated enzyme/prodrug gene therapy. Methods. A total of 12 patients were included in this retrospective study. All patients were enrolled in a first-in-human study (NCT01172964) of NSC-mediated therapy for recurrent high-grade glioma. DCE-MRI data from all patients were collected and analyzed at three time points: MRI#1—day 1 postsurgery/treatment, MRI#2— day 7 ± 3 posttreatment, and MRI#3—one-month follow-up. Plasma volume (Vp), permeability (Ktr), and leakage (λtr) perfusion parameters were calculated by fitting a pharmacokinetic model to the DCE-MRI data. The contrast-enhancing (CE) volume was measured from the last dynamic phase acquired in the DCE sequence. Perfusion parameters and CE at each MRI time point were recorded along with their relative change between MRI#2 and MRI#3 (Δ32). Cox regression was used to analyze patient survival. Results. At MRI#1 and at MRI#3, none of the parameters showed a significant correlation with overall survival (OS). However, at MRI#2, CE and λtr were significantly associated with OS (p<0.05). The relative λtr and Vp from timepoint 2 to timepoint 3 (Δ32λtr and Δ32Vp) were each associated with a higher hazard ratio (p<0.05). All parameters were highly correlated, resulting in a multivariate model for OS including only CE at MRI#2 and Δ32Vp, with an R2 of 0.89. Conclusion. The change in perfusion parameter values from 1 week to 1 month following NSC-mediated therapy combined with contrast-enhancing volume may be a useful biomarker to predict overall survival in patients with recurrent high-grade glioma
A Potent Peptidomimetic Inhibitor of Botulinum Neurotoxin Serotype A Has a Very Different Conformation than SNAP-25 Substrate
SummaryBotulinum neurotoxin serotype A is the most lethal of all known toxins. Here, we report the crystal structure, along with SAR data, of the zinc metalloprotease domain of BoNT/A bound to a potent peptidomimetic inhibitor (Ki = 41 nM) that resembles the local sequence of the SNAP-25 substrate. Surprisingly, the inhibitor adopts a helical conformation around the cleavage site, in contrast to the extended conformation of the native substrate. The backbone of the inhibitor's P1 residue displaces the putative catalytic water molecule and concomitantly interacts with the “proton shuttle” E224. This mechanism of inhibition is aided by residue contacts in the conserved S1′ pocket of the substrate binding cleft and by the induction of new hydrophobic pockets, which are not present in the apo form, especially for the P2′ residue of the inhibitor. Our inhibitor is specific for BoNT/A as it does not inhibit other BoNT serotypes or thermolysin
Comparison of established and emerging biodosimetry assays
Rapid biodosimetry tools are required to assist with triage in the case of a large-scale radiation incident. Here, we aimed to determine the dose-assessment accuracy of the well-established dicentric chromosome assay (DCA) and cytokinesis-block micronucleus assay (CBMN) in comparison to the emerging γ-H2AX foci and gene expression assays for triage mode biodosimetry and radiation injury assessment. Coded blood samples exposed to 10 X-ray doses (240 kVp, 1 Gy/min) of up to 6.4 Gy were sent to participants for dose estimation. Report times were documented for each laboratory and assay. The mean absolute difference (MAD) of estimated doses relative to the true doses was calculated. We also merged doses into binary dose categories of clinical relevance and examined accuracy, sensitivity and specificity of the assays. Dose estimates were reported by the first laboratories within 0.3-0.4 days of receipt of samples for the γ-H2AX and gene expression assays compared to 2.4 and 4 days for the DCA and CBMN assays, respectively. Irrespective of the assay we found a 2.5-4-fold variation of interlaboratory accuracy per assay and lowest MAD values for the DCA assay (0.16 Gy) followed by CBMN (0.34 Gy), gene expression (0.34 Gy) and γ-H2AX (0.45 Gy) foci assay. Binary categories of dose estimates could be discriminated with equal efficiency for all assays, but at doses ≥1.5 Gy a 10% decrease in efficiency was observed for the foci assay, which was still comparable to the CBMN assay. In conclusion, the DCA has been confirmed as the gold standard biodosimetry method, but in situations where speed and throughput are more important than ultimate accuracy, the emerging rapid molecular assays have the potential to become useful triage tools
- …