hh-AlN-Mg(OH)2_{2} vdW Bilayer Heterostructure: Tuning the excitonic characteristics

Motivated by recent studies that reported the successful synthesis of monolayer Mg(OH)$_{2}$ [Suslu \textit{et al.}, Sci. Rep. \textbf{6}, 20525 (2016)] and hexagonal (\textit{h}-)AlN [Tsipas \textit{et al}., Appl. Phys. Lett. \textbf{103}, 251605 (2013)], we investigate structural, electronic, and optical properties of vertically stacked $h$-AlN and Mg(OH)$_{2}$, through \textit{ab initio} density-functional theory (DFT), many-body quasi-particle calculations within the GW approximation, and the Bethe-Salpeter equation (BSE). It is obtained that the bilayer heterostructure prefers the $AB^{\prime}$ stacking having direct band gap at the $\Gamma$ with Type-II band alignment in which the valance band maximum and conduction band minimum originate from different layer. Regarding the optical properties, the imaginary part of the dielectric function of the individual layers and hetero-bilayer are investigated. The hetero-bilayer possesses excitonic peaks which appear only after the construction of the hetero-bilayer. The lowest three exciton peaks are detailedly analyzed by means of band decomposed charge density and the oscillator strength. Furthermore, the wave function calculation shows that the first peak of the hetero-bilayer originates from spatially indirect exciton where the electron and hole localized at $h$-AlN and Mg(OH)$_{2}$, respectively, which is important for the light harvesting applications.Comment: Accepted by Physical Review

Induction of Maturogenesis by Partial Pulpotomy: 1 Year Follow-Up

In cariously exposed immature permanent teeth, the treatment choice is controversial in pediatric dentistry. Radical root canal treatment usually appears to be the solution for these teeth. Even partial pulpotomy is a vital treatment for traumatically exposed immature permanent teeth; extending the borders of indication towards cariously exposed immature permanent teeth with reversible pulpitis may abolish the necessity of pulpectomy. This article describes the partial pulpotomy of a cariously affected immature permanent teeth and the follow-up for 1 year. A healthy 11-year-old male patient was referred to Gazi University Faculty of Dentistry Department of Pediatric Dentistry. The patient had reversible pulpitis symptoms on teeth numbered 45. At radiographic examination, immature apex and deep caries lesion were observed and partial pulpotomy was performed by using calcium hydroxide to maintain vitality of the pulp and allow continued development of root dentin expecting the root will attain full maturity. Clinical and radiographic follow-up demonstrated a vital pulp besides not only closure of the apex (apexogenesis), but also physiologic root development (maturogenesis) after 1 year. Partial pulpotomy is an optional treatment for cariously exposed immature permanent teeth for preserving vitality and physiological root development

Structural, optical and magnetic properties of Zn1−xMnxO micro-rod arrays synthesized by spray pyrolysis method

Undoped and Mn-doped ZnO micro-rod arrays were fabricated by the spray pyrolysis method on glass substrates. X-ray diffraction and scanning electron microscopy showed that these micro-rod arrays had a polycrystalline wurtzite structure and high c-axis preferred orientation. Photoluminescence studies at 10 K show that the increase of manganese content leads to a relative decrease in deep level band intensity with respect to undoped ZnO. Magnetic measurements indicated that undoped ZnO was diamagnetic in nature whereas Mn-doped ZnO samples exhibited ferromagnetic behavior at room temperature, which is possibly related to the substitution of Mn ions (Mn2+) for Zn ions in the ZnO lattice

Structural, optical and magnetic properties of Cr doped ZnO microrods prepared by spray pyrolysis

A series of Cr-doped ZnO micro-rod arrays were fabricated by a spray pyrolysis method. X-ray diffraction patterns of the samples showed that the undoped and Cr-doped ZnO microrods exhibit hexagonal crystal structure. Surface morphology analysis of the samples has revealed that pure ZnO sample has a hexagonal microrod morphology. From X-ray photoelectron spectroscopy studies, the Cr 2p3/2 binding energy is found to be 577.34 eV indicating that the electron binding energy of the Cr in ZnO is almost the same as the binding energy of Cr3+ states in Cr2O3. The optical band gap Eg decreases slightly from 3.26 to 3.15 eV with the increase of actual Cr content from x = 0.00 to 4.63 at % in ZnO. Photoluminescence studies at 10 K show that the incorporation of chromium leads to a relative increase of deep level band intensity. It was also observed that Cr doped samples clearly showed ferromagnetic behavior; however, 2.49 % Cr doped ZnO showed remnant magnetization higher than that of 1.07 % and 4.63 % Cr doped samples, while 4.63 % Cr doped ZnO samples had a coercive field higher than the other dopings

Effects of Cu diffusion-doping on structural, optical and magnetic properties of ZnO nanorod arrays grown by VPT

Well-aligned ZnO nanorods were prepared by the vapor phase transport method on Si covered with a ZnO buffer layer. After the nanostructure growth, Cu was doped into the ZnO nanorods by diffusion at three different temperatures and for different times. Undoped and Cu diffusion-doped ZnO samples are highly textured, with the c axis of the wurtzite structure along the growth direction. The incorporation of Cu caused some slight changes in the nanorod alignment, although the wurtzite crystal structure was maintained. X-ray photoelectron spectroscopy measurements revealed that Cu ions were in a divalent state and substituted for the Zn2+ ions of the ZnO matrix. Photoluminescence results at 10 K indicate that the incorporation of copper leads to a relative increase of Cu-related structured green band deep level intensity. Magnetic measurements revealed that both undoped and Cu diffusion-doped ZnO samples exhibited room temperature ferromagnetism. It was also found that bound magnetic polarons play an important role in the appearance of room temperature ferromagnetism in Cu diffusion-doped ZnO nanorods

Enhanced photocatalytic activity of CuWO4 doped TiO2 photocatalyst towards carbamazepine removal under UV irradiation

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500◦C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0250.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly

Right ventricular involvement in anterior myocardial infarction: a tissue Doppler-derived strain and strain rate study

OBJECTIVE: Strain and strain rate imaging is currently the most popular echocardiographic technique that reveals subclinical myocardial damage. There are currently no available data on this imaging method with regard to assessing right ventricular involvement in anterior myocardial infarction. Therefore, we aimed to evaluate right ventricular regional functions using a derived strain and strain rate imaging tissue Doppler method in patients who were successfully treated for their first anterior myocardial infarction. METHODS: The patient group was composed of 44 patients who had experienced their first anterior myocardial infarction and had undergone successful percutaneous coronary intervention. Twenty patients were selected for the control group. The right ventricular myocardial samplings were performed in three regions: the basal, mid, and apical segments of the lateral wall. The individual myocardial velocity, strain, and strain rate values of each basal, mid, and apical segment were obtained. RESULTS: The right ventricular myocardial velocities of the patient group were significantly decreased with respect to all three velocities in the control group. The strain and strain rate values of the right mid and apical ventricular segments in the patient group were significantly lower than those of the control group (excluding the right ventricular basal strain and strain rate). In addition, changes in the right ventricular mean strain and strain rate values were significant. CONCLUSION: Right ventricular involvement following anterior myocardial infarction can be assessed using tissue Doppler based strain and strain rat