Theoretical and experimental studies on torque converters

Lysholm-Smith torques converters has a special importance, due to the fact that this kind of machine can realize a continuously variation of the torque and of the rotational speed to the outlet shaft as function of the resistant torqueand, in the same time, an amortization of the shocks and vibrations. This type of torque converter has three turbine stages, intercalated by two stages of reactors (having stationary blades). The present paper presents theoretical and experimental results obtained on a Lysholm-Smith torque converter CHC-380 in the laboratory of Hydraulic Machinery Departmentfrom POLITEHNICA University of Timişoara, ROMÂNIA. Theoretical, was studied the behavior of the torque converter, expressed by the characteristic curves. Experimentally, was studied the variation of the temperature inside the torque converter with and without the cooling system and, also, the influence of the filling degree on the characteristic curves. The paper discusses, in the same time the definition and the variation of the degree of transparency for this particular torque converter

Corrosion Behavior of the As-cast and Heat-treated ZA27 Alloy

Corrosion behaviour of the as-cast and heat-treated ZA27 alloy was examined. The alloy was prepared by conventional melting and casting route and then thermally processed by applying T4 heat treatment regime (solutionizing at 370 °C for 3 hours followed by water quenching and natural aging). Corrosion rate of the as-cast and heat-treated ZA27 alloy was determined in 3.5 wt. % NaCl solution through immersion test using both weight loss method and polarization resistance measurements. It was shown that applied thermal treatment resulted in increased ductility of the heat-treated alloy and had a small beneficial effect on the corrosion resistance of ZA27 alloy

Stretched chemical bonds in Si6H6: A transition from ring currents to localized pi-electrons?

Motivated by solid-state studies on the cleavage force in Si, and the consequent stretching of chemical bonds, we here study bond stretching in the, as yet unsynthesized, free space molecule Si6H6. We address the question as to whether substantial bond stretching (but constrained to uniform scaling on all bonds) can result in a transition from ring current behaviour, characteristic say of benzene at its equilibrium geometry, to localized pi-electrons on Si atoms. Some calculations are also recorded on dissociation into 6 SiH radicals. While the main studies have been carried out by unrestricted Hartree-Fock (HF) theory, the influence of electron correlation has been examined using two forms of density functional theory. Planar Si6H6 treated by HF is bound to be unstable, not all vibrational frequencies being real. Some buckling is then allowed, which results in real frequencies and stability. Evidence is then provided that the non-planar structure, as the Si-Si distance is increased, exhibits pi-electron localization in the range 1.2-1.5 times the equilibrium distance

Probability density functions of work and heat near the stochastic resonance of a colloidal particle

We study experimentally and theoretically the probability density functions of the injected and dissipated energy in a system of a colloidal particle trapped in a double well potential periodically modulated by an external perturbation. The work done by the external force and the dissipated energy are measured close to the stochastic resonance where the injected power is maximum. We show a good agreement between the probability density functions exactly computed from a Langevin dynamics and the measured ones. The probability density function of the work done on the particle satisfies the fluctuation theorem

Assessment of plastic flows and stocks in Serbia using material flow analysis

Material flow analysis was used to assess the amounts of plastic materials flows and stocks that are annually produced, consumed, imported, exported, collected, recycled, and disposed in the landfills in Serbia. The analysis revealed that approximately 269,000 tons of plastic materials are directly disposed in uncontrolled landfills in Serbia without any pretreatment, and that significant amounts of these materials have already accumulated in the landfills. The substantial amounts of land-filled plastics represent not only a loss of valuable recourses, but also pose a serious treat to the environment and human health, and if the trend of direct plastic land-filling is continued, Serbia will face with grave consequences

Climatic cycles recorded in the Middle Eocene hemipelagites from a Dinaric foreland basin of Istria (Croatia)

Middle Eocene hemipelagic marls from the Pazin-Trieste Basin, a foreland basin of the Croatian Dinarides, display repetitive alternations of two types of marls with different resistance to weathering. This study focuses on the chemical composition, stable isotopes, and palynomorph content of these marls in order to better understand the nature of their cyclic deposition and to identify possible paleoenvironmental drivers responsible for their formation. The less resistant marls (LRM) have consistently lower carbonate content, lower δ18O and δ13C values, and more abundant dinoflagellate cysts than the more resistant marls (MRM). We interpret these differences between the two marl types to be a result of climatic variations, likely related to Milankovitch oscillations. Periods with wetter climate, associated with increased continental runoff, detrital and nutrient influx produced the LRM. Higher nutrient supply sparked higher dinoflagellate productivity during these times, while reduced salinity and stratification of the water column may have hampered the productivity of calcareous nannoplankton and/or planktonic foraminifera. In contrast, the MRM formed during dryer periods which favoured higher carbonate accumulation rates. This study provides new information about the sedimentary record of short-scale climate variations reflected in wet-dry cycles during an overall warm, greenhouse Earth

Superconducting and Normal State Properties of Neutron Irradiated MgB2

We have performed a systematic study of the evolution of the superconducting and normal state properties of neutron irradiated MgB$_2$ wire segments as a function of fluence and post exposure annealing temperature and time. All fluences used suppressed the transition temperature, Tc, below 5 K and expanded the unit cell. For each annealing temperature Tc recovers with annealing time and the upper critical field, Hc2(T=0), approximately scales with Tc. By judicious choice of fluence, annealing temperature and time, the Tc of damaged MgB2 can be tuned to virtually any value between 5 and 39 K. For higher annealing temperatures and longer annealing times the recovery of Tc tends to coincide with a decrease in the normal state resistivity and a systematic recovery of the lattice parameters.Comment: Updated version, to appear in Phys. Rev.