Visualisation Tools for Multi-Perspective, Cross-Sector, Long-Term Infrastructure Performance Evaluation

Across different infrastructure sectors there are systems that help to monitor the current and near-future operation and performance of a particular system. Whilst Supervisory Control and Data Acquisition (SCADA) systems are critical to maintaining acceptable levels of functionality, they do not provide insights over the longer timescales across which strategic investment decisions play out. To understand how individual or multiple, interdependent, infrastructure sectors perform over longer timescales, capacity/demand modelling is required. However, the outputs of such models are often a complex high-dimensionality result-set, and this complexity is further compounded when crosssector evaluation is required. To maximise utility of such models, tools are required that can process and present key outputs. In this paper we describe the development of prototype tools for infrastructure performance evaluation in relation to different strategic decisions and the complex outputs generated from capacity and demand models of five infrastructure sectors (energy, water, waste water, solid waste, transport) investigated within the UK Infrastructure Transitions Research Consortium (ITRC). By constructing tools that expose various dimensions of the model outputs, a user is able to take greater control over the knowledge discovery process

Development of boron calibration via hybrid comparator method in prompt gamma activation analysis

The prompt gamma activation analysis (PGAA) facility at the Nuclear Engineering Teaching Laboratory at The University of Texas at Austin was utilized to quantify boron concentrations in boron carbide semiconductor films deposited on silicon substrates. Calibration was complicated by the unique and varying sample geometries analyzed. In addition, there was a dearth of solid materials available with quantified boron concentrations having comparable or readily modifiable dimensions to exploit for calibration purposes. Therefore, a novel hybrid comparator method was developed for the quantification of boron utilizing aluminum as an inexpensive and easily machinable reference material. Aluminum samples were manufactured with high tolerances to match the geometry of each sample of interest. Each boron carbide film sample and its congruent aluminum sample were measured in the PGAA system. The measured aluminum responses and relevant nuclear parameters were used to standardize the measurements. A boron standard was created using a procedure derived from a similar approach used by the National Institute of Standards and Technology. Quality control measurements using this standard show that the method provided accuracy to within 5% for boron quantification

Study of advanced fuel system concepts for commercial aircraft and engines

The impact on a commercial transport aircraft of using fuels which have relaxed property limits relative to current commercial jet fuel was assessed. The methodology of the study is outlined, fuel properties are discussed, and the effect of the relaxation of fuel properties analyzed. Advanced fuel system component designs that permit the satisfactory use of fuel with the candidate relaxed properties in the subject aircraft are described. The two fuel properties considered in detail are freezing point and thermal stability. Three candidate fuel system concepts were selected and evaluated in terms of performance, cost, weight, safety, and maintainability. A fuel system that incorporates insulation and electrical heating elements on fuel tank lower surfaces was found to be most cost effective for the long term

Theory of a Scanning Tunneling Microscope with a Two-Protrusion Tip

We consider a scanning tunneling microscope (STM) such that tunneling occurs through two atomically sharp protrusions on its tip. When the two protrusions are separated by at least several atomic spacings, the differential conductance of this STM depends on the electronic transport in the sample between the protrusions. Furthermore two-protrusion tips commonly occur during STM tip preparation. We explore possible applications to probing dynamical impurity potentials on a metallic surface and local transport in an anisotropic superconductor.Comment: revtex, 11 pages, 6 figures upon reques

Comparison between seasonal pumped-storage and conventional reservoir dams from the water, energy and land nexus perspective

Renewable sources of energy are providing an increasing share of the electricity generation mix, but their intermittency drives a need for energy storage. At the same time, water resources are increasingly scarce due to changes in demand, such as from population growth, supply side pressures such as climate change and governance challenges relating to poor management. Large storage reservoirs are used for water management and for energy storage. However, some existing and proposed hydropower reservoirs require vast areas of land and have considerable social and environmental impacts. Growing concerns on water and energy storage from a water-energy-land nexus approach motivated this study. Our objective is to compare how energy and water storage services, such as hydropower generation, electricity grid and water management, are provided with Seasonal Pumped-Storage (SPS) and Conventional Reservoir Dams (CRD) plants. Our case study region is Brazil, a country with extensive hydropower capacity and development plans, for which we compare the cost, land requirement and social impacts between CRD and potential SPS plants. Whilst seasonal pumped-storage have higher capital costs than conventional reservoir dams, given the much lower land requirements and evaporative losses, they are a valuable water and energy storage alternative especially in locations with plain topography and high evaporation. Results show that if Sobradinho CRD was built today it would result in a $USD 1.46 billion loss, on the other hand, Muquém SPS plant would result in a$USD 0.67b revenue

Strong spin relaxation length dependence on electric field gradients

We discuss the influence of electrical effects on spin transport, and in particular the propagation and relaxation of spin polarized electrons in the presence of inhomogeneous electric fields. We show that the spin relaxation length strongly depends on electric field gradients, and that significant suppression of electron spin polarization can occur as a result thereof. A discussion in terms of a drift-diffusion picture, and self-consistent numerical calculations based on a Boltzmann-Poisson approach shows that the spin relaxation length in fact can be of the order of the charge screening length.Comment: 4 pages, 3 figures, to be presented at PASPSI

Catalyst Site Epimerization during the Kinetic Resolution of Chiral α-Olefins by Polymerization

A new enantiopure C1-symmetric olefin polymerization precatalyst, (1,2-SiMe_2)_2{η^5-C_5H_2-4-((S)-CHEtCMe_3)}{η^5-C_5H-3,5-(CHMe_2)_2}ZrCl_2, (S)-2, was synthesized, and its use for the kinetic resolution of 3-methyl-substituted racemic α-olefins was investigated. Upon activation with methyl aluminoxane (MAO), selectivity factors for most olefins were greater when (S)-2 was used as the catalyst as compared to its previously reported methylneopentyl analogue, (1,2-SiMe_2)_2{η^5-C_5H_2-4-((S)-CHMeCCMe_3)}{η^5-C_5H-3,5-(CHMe_2)_2}ZrCl_2, (S)-1. Pentad analysis of polypropylene produced by the two catalysts at various propylene concentrations indicates that (S)-2 undergoes more efficient site epimerization (polymeryl chain swinging prior to subsequent monomer enchainment) at intermediate propylene concentrations compared to (S)-1. At high and low propylene concentrations, however, the two catalysts behave similarly. On the other hand, polymerization of 3,5,5-trimethyl-1-hexene at different olefin concentrations and temperatures illustrated that selectivity differences between the two catalysts are likely not a consequence of inefficient site epimerization for (S)-1

Seasonal Pumped-Storage: An Integrated Approach for Hydropower, Water Management and Energy Storage

With the current increase in electricity generation from renewable energy sources, pumped-storage plants have been used for energy storage purposes, to guarantee the supply of electricity and reduce the impact of intermittent sources in the grid. In addition, there is an increased demand for water management solutions due to changes in climate and population increase. Seasonal pumped-storage comes as an alternative to store both energy and water with the intention to optimize hydropower generation, increase energy and water supply security, support the introduction of intermittent renewable energy sources to the grid, enable the construction of new hydroelectric dams in cascade, reduce the dependence on thermal generation, lower transmission costs, control floods and mitigate conflicts over the multiple uses of water. A case study in the Zambezi River Basin compares a conventional reservoir dam with a seasonal pumped storage plant, with the same storage volume. This comparison shows that seasonal pumped-storage has higher construction costs than conventional reservoir dams, however, as seasonal pumped-storage has much lower land requirements and evaporation losses, it becomes more attractive to conventional reservoir dams in locations with plain topography and where water is scarce

A hitchhiker\u27s guide to the Maritimes: Anthropogenic transport facilitates long-distance dispersal of an invasive marine crab to Newfoundland

Aim To determine timing, source and vector for the recent introduction of the European green crab, Carcinus maenas (Linnaeus, 1758), to Newfoundland using multiple lines of evidence.Location Founding populations in Placentia Bay, Newfoundland, Canada and potential source populations in the north-west Atlantic (NWA) and Europe. Methods We analysed mitochondrial and microsatellite genetic data from European and NWA populations sampled during 1999-2002 to determine probable source locations and vectors for the Placentia Bay introduction discovered in 2007. We also analysed Placentia Bay demographic data and shipping records to look for congruent patterns with genetic analyses. Results Demographic data and surveys suggested that C. maenas populations are established and were in Placentia Bay for several years (c. 2002) prior to discovery. Genetic data corroboratively suggested central/western Scotian Shelf populations (e.g., Halifax) as the likely source area for the anthropogenic introduction. These Scotian Shelf populations were within an admixture zone made up of genotypes from both the earlier (early 1800s) and later (late 1900s) introductions of the crab to the NWA from Europe. Placentia Bay also exhibited this mixed ancestry. Probable introduction vectors included vessel traffic and shipping, especially vessels carrying ballast water.Main conclusions Carcinus maenas overcame considerable natural barriers (i.e., coastal and ocean currents) via anthropogenic transport to become established and abundant in Newfoundland. Our study thus demonstrates how non-native populations can be important secondary sources of introduction especially when aided by human transport. Inference of source populations was possible owing to the existence of an admixture zone in central/western Nova Scotia made up of southern and northern genotypes corresponding with the crab\u27s two historical introductions. Coastal vessel traffic was found to be a likely vector for the crab\u27s spread to Newfoundland. Our study demonstrates that there is considerable risk for continued introduction or reintroduction of C. maenas throughout the NWA. © 2010