Infant feeding bottle design, growth and behaviour: results from a randomised trial

BACKGROUND: Whether the design of an anti-vacuum infant feeding bottle influences infant milk intake, growth or behavior is unknown, and was the subject of this randomized trial. METHODS: SUBJECTS: 63 (36 male) healthy, exclusively formula-fed term infants. INTERVENTION: Randomisation to use Bottle A (n = 31), one-way air valve: Philips Avent) versus Bottle B (n = 32), internal venting system: Dr Browns). 74 breast-fed reference infants were recruited, with randomisation (n = 24) to bottle A (n = 11) or B (n = 13) if bottle-feeding was subsequently introduced. Randomisation: stratified by gender and parity; computer-based telephone randomisation by independent clinical trials unit. SETTING: Infant home. PRIMARY OUTCOME MEASURE: infant weight gain to 4 weeks. SECONDARY OUTCOMES: (i) milk intake (ii) infant behaviour measured at 2 weeks (validated 3-day diary); (iii) risk of infection; (iv) continuation of breastfeeding following introduction of mixed feeding. RESULTS: Number analysed for primary outcome: Bottle A n = 29, Bottle B n = 25. PRIMARY OUTCOME: There was no significant difference in weight gain between randomised groups (0-4 weeks Bottle A 0.74 (SD 1.2) SDS versus bottle B 0.51 (0.39), mean difference 0.23 (95% CI -0.31 to 0.77). SECONDARY OUTCOMES: Infants using bottle A had significantly less reported fussing (mean 46 versus 74 minutes/day, p < 0.05) than those using bottle B. There was no significant difference in any other outcome measure. Breast-fed reference group: There were no significant differences in primary or secondary outcomes between breast-fed and formula fed infants. The likelyhood of breastfeeding at 3 months was not significantly different in infants subsequently randomised to bottle A or B. CONCLUSION: Bottle design may have short-term effects on infant behaviour which merit further investigation. No significant effects were seen on milk intake or growth; confidence in these findings is limited by the small sample size and this needs confirmation in a larger study. TRIAL REGISTRATION: Clinical Trials.gov NCT00325208

A unified approach on Springer fibers in the hook, two-row and two-column cases

We consider the Springer fiber over a nilpotent endomorphism. Fix a Jordan basis and consider the standard torus relative to this. We deal with the problem to describe the flags fixed by the torus which belong to a given component of the Springer fiber. We solve the problem in the hook, two-row and two-column cases. We provide two main characterizations which are common to the three cases, and which involve dominance relations between Young diagrams and combinatorial algorithms. Then, for these three cases, we deduce topological properties of the components and their intersections.Comment: 42 page

Personality trait development in midlife: exploring the impact of psychological turning points

This study examined long-term personality trait development in midlife and explored the impact of psychological turning points on personality change. Selfdefined psychological turning points reflect major changes in the ways people think or feel about an important part of their life, such as work, family, and beliefs about themselves and about the world. This study used longitudinal data from the Midlife in the US survey to examine personality trait development in adults aged 40–60 years. The Big Five traits were assessed in 1995 and 2005 by means of self-descriptive adjectives. Seven types of self-identified psychological turning points were obtained in 1995. Results indicated relatively high stability with respect to rankorders and mean-levels of personality traits, and at the same time reliable individual differences in change. This implies that despite the relative stability of personality traits in the overall sample, some individuals show systematic deviations from the sample mean-levels. Psychological turning points in general showed very little influence on personality trait change, although some effects were found for specific types of turning points that warrant further research, such as discovering that a close friend or relative was a much better person than one thought they were

Agreement between physical therapists and radiologists of stratifying patients with shoulder pain into new treatment related categories using ultrasound; an exploratory study

© 2019 Elsevier Ltd Study design: A systematic overview of the literature and an agreement study. Objectives: The aim of this study is to explore the inter-professional agreement of diagnostic musculoskeletal ultrasound (DMUS) between physical therapists (PT) and radiologists, using a new classification strategy based upon the therapeutic consequences in patients with shoulder pain. Background: DMUS is frequently used by PTs, although the agreement regarding traditional diagnostic labels between PTs and radiologists is only fair. Nevertheless, DMUS could be useful when used as a stratifying-tool. Methods: First, a systematic overview of current evidence was performed to assess which traditional diagnostic labels could be recoded into new treatment related categories (referral to secondary care, corticosteroid injections, physical therapy, watchful waiting). Next, kappa values were calculated for these categories between PTs and radiologists. Results: Only three categories were extracted, as none of the traditional diagnostic labels were classified into the ‘corticosteroid injection’ category. Overall, we found moderate agreement to stratify patients into treatment related categories and substantial agreement for the category ‘referral to secondary care’. Both categories ‘watchful waiting’ and ‘indication for physical therapy’ showed moderate agreement between the two professions. Conclusion: Our results indicate that the agreement between radiologists and PTs is moderate to substantial when labelling is based on treatment consequences. DMUS might be able to help the PT to guide treatment, especially for the category ‘referral to secondary care’ as this showed the highest agreement. However, as this is just an explorative study, more research is needed, to validate and assess the consequences of this stratification classification for clinical care

Analytical bias in the measurement of serum 25-hydroxyvitamin D concentrations impairs assessment of vitamin D status in clinical and research settings

Measured serum 25-hydroxyvitamin D concentrations vary depending on the type of assay used and the specific laboratory undertaking the analysis, impairing the accurate assessment of vitamin D status. We investigated differences in serum 25-hydroxyvitamin D concentrations measured at three laboratories (laboratories A and B using an assay based on liquid chromatography-tandem mass spectrometry and laboratory C using a DiaSorin Liaison assay), against a laboratory using an assay based on liquid chromatography-tandem mass spectrometry that is certified to the standard reference method developed by the National Institute of Standards and Technology and Ghent University (referred to as the ‘ certified laboratory ’ ). Separate aliquots from the same original serum sample for a subset of 50 participants from the Ausimmune Study were analysed at the four laboratories. Bland-Altman plots were used to visually check agreement between each laboratory against the certified laboratory. Compared with the certified laboratory, serum 25-hydroxyvitamin D concentrations were on average 12.4 nmol/L higher at laboratory A (95% limits of agreement: -17 .8,42.6); 12.8 nmol/L higher at laboratory B (95% limits of agreement: 0.8,24.8); and 10.6 nmol/L lower at laboratory C (95% limits of agreement: -48.4,27.1). The prevalence of vitamin D deficiency (defined here as 25-hydroxyvitamin D < 50 nmol/L) was 24%, 16%, 12% and 41% at the certified laboratory, and laboratories A, B, and C, respectively. Our results demonstrate considerable differences in the measurement of 25-hydroxyvitamin D concentrations compared with a certified laboratory, even between laboratories using assays based on liquid chromatography-tandem mass spectrometry, which is often considered the gold-standard assay. To ensure accurate and reliable measurement of serum 25-hydroxyvitamin D concentrations, all laboratories should use an accuracy-based quality assurance system and, ideally, comply with international standardisation effort

Food color is in the eye of the beholder: the role of human trichromatic vision in food evaluation

Non-human primates evaluate food quality based on brightness of red and green shades of color, with red signaling higher energy or greater protein content in fruits and leafs. Despite the strong association between food and other sensory modalities, humans, too, estimate critical food features, such as calorie content, from vision. Previous research primarily focused on the effects of color on taste/flavor identification and intensity judgments. However, whether evaluation of perceived calorie content and arousal in humans are biased by color has received comparatively less attention. In this study we showed that color content of food images predicts arousal and perceived calorie content reported when viewing food even when confounding variables were controlled for. Specifically, arousal positively co-varied with red-brightness, while green-brightness was negatively associated with arousal and perceived calorie content. This result holds for a large array of food comprising of natural food - where color likely predicts calorie content - and of transformed food where, instead, color is poorly diagnostic of energy content. Importantly, this pattern does not emerged with nonfood items. We conclude that in humans visual inspection of food is central to its evaluation and seems to partially engage the same basic system as non-human primates

Dental Microwear and Diet of the Plio-Pleistocene Hominin Paranthropus boisei

The Plio-Pleistocene hominin Paranthropus boisei had enormous, flat, thickly enameled cheek teeth, a robust cranium and mandible, and inferred massive, powerful chewing muscles. This specialized morphology, which earned P. boisei the nickname “Nutcracker Man”, suggests that this hominin could have consumed very mechanically challenging foods. It has been recently argued, however, that specialized hominin morphology may indicate adaptations for the consumption of occasional fallback foods rather than preferred resources. Dental microwear offers a potential means by which to test this hypothesis in that it reflects actual use rather than genetic adaptation. High microwear surface texture complexity and anisotropy in extant primates can be associated with the consumption of exceptionally hard and tough foods respectively. Here we present the first quantitative analysis of dental microwear for P. boisei. Seven specimens examined preserved unobscured antemortem molar microwear. These all show relatively low complexity and anisotropy values. This suggests that none of the individuals consumed especially hard or tough foods in the days before they died. The apparent discrepancy between microwear and functional anatomy is consistent with the idea that P. boisei presents a hominin example of Liem's Paradox, wherein a highly derived morphology need not reflect a specialized diet

Mechanical Properties of Plant Underground Storage Organs and Implications for Dietary Models of Early Hominins

The diet of early human ancestors has received renewed theoretical interest since the discovery of elevated d13C values in the enamel of Australopithecus africanus and Paranthropus robustus. As a result, the hominin diet is hypothesized to have included C4 grass or the tissues of animals which themselves consumed C4 grass. On mechanical grounds, such a diet is incompatible with the dental morphology and dental microwear of early hominins. Most inferences, particularly for Paranthropus, favor a diet of hard or mechanically resistant foods. This discrepancy has invigorated the longstanding hypothesis that hominins consumed plant underground storage organs (USOs). Plant USOs are attractive candidate foods because many bulbous grasses and cormous sedges use C4 photosynthesis. Yet mechanical data for USOs—or any putative hominin food—are scarcely known. To fill this empirical void we measured the mechanical properties of USOs from 98 plant species from across sub-Saharan Africa. We found that rhizomes were the most resistant to deformation and fracture, followed by tubers, corms, and bulbs. An important result of this study is that corms exhibited low toughness values (mean = 265.0 J m-2) and relatively high Young’s modulus values (mean = 4.9 MPa). This combination of properties fits many descriptions of the hominin diet as consisting of hard-brittle objects. When compared to corms, bulbs are tougher (mean = 325.0 J m-2) and less stiff (mean = 2.5 MPa). Again, this combination of traits resembles dietary inferences, especially for Australopithecus, which is predicted to have consumed soft-tough foods. Lastly, we observed the roasting behavior of Hadza hunter-gatherers and measured the effects of roasting on the toughness on undomesticated tubers. Our results support assumptions that roasting lessens the work of mastication, and, by inference, the cost of digestion. Together these findings provide the first mechanical basis for discussing the adaptive advantages of roasting tubers and the plausibility of USOs in the diet of early hominins