Liquid flyback booster pre-phase: A study assessment

The concept of a flyback booster has been around since early in the shuttle program. The original two-stage shuttle concepts used a manned flyback booster. These boosters were eliminated from the program for funding and size reasons. The current shuttle uses two Redesigned Solid Rocket Motors (RSRM's), which are recovered and refurbished after each flight; this is one of the major cost factors of the program. Replacement options have been studied over the past ten years. The conclusion reached by the most recent study is that the liquid flyback booster (LFBB) is the only competitive option from a life-cycle cost perspective. The purpose of this study was to assess the feasibility and practicality of LFBB's. The study provides an expansion of the recommendations made during the aforementioned study. The primary benefits are the potential for enhanced reusability and a reduction of recurring costs. The potential savings in vehicle turnaround could offset the up-front costs. Development of LFBB's requires a commitment to the shuttle program for 20 to 30 years. LFBB's also offer enhanced safety and abort capabilities. Currently, any failure of an RSRM can be considered catastrophic, since there are no intact abort capabilities during the burn of the RSRM's. The performance goal of the LFBB's was to lift a fully loaded orbiter under optimal conditions, so as not to be the limiting factor of the performance capability of the shuttle. In addition, a final benefit is the availability of growth paths for applications other than shuttle

Liquid Flyback Booster Pre-Phase A Study Assessment

Mw concept of a flyback booster has been around since early in the Shuttle program. The original two-stage Shuttle concepts used a manned flyback booster. These boosters were eliminated from the program for funding and size reasons. The current Shuttle uses two Redesigned Solid Rocket Motors (RSRMs), which are recovered and refurbished after each flight; this is one of the major cost factors of the program. Replacement options have been studied over the past ten years. The conclusion reached by the most recent study is that the liquid flyback booster (LFBB) is the only competitive option from a life-cycle cost perspective. The purpose of this study was to assess the feasibility and practicality of LFBBs. The study provides an expansion of the recommendations made during the during the aforementioned study. The primary benefits are the potential for enhanced reusability and a reuction of recurring costs. The potential savings in vehicle turnaround could offset the up-front costs. Development of LFBBs requires a commitment to the Shuttle program for 20 to 30 years. LFBBs also offer enhanced safety and abort capabilities. Currently, any failure of an RSRM can be considered catastrophic since them we no intact abort capabilities during the burn of the RSRMS. The performance goal of the LFBBs was to lift a fully loaded Orbiter under optimal conditions, so as not to be the limiting factor of the performance capability of the Shuttle. In addition, a final benefit is the availability of growth paths for applications other than the Shuttle

Esophageal perforation in South of Sweden: Results of surgical treatment in 125 consecutive patients

<p>Abstract</p> <p>Background</p> <p>For many years there has been a debate as to which is the method of choice in treating patients with esophageal perforation. The literature consists mainly of small case series. Strategies for aiding patients struck with this disease is changing as new and less traumatic treatment options are developing. We studied a relatively large consecutive material of esophageal perforations in an effort to evaluate prognostic factors, diagnostic efforts and treatment strategy in these patients.</p> <p>Methods</p> <p>125 consecutive patients treated at the University Hospital of Lund from 1970 to 2006 were studied retrospectively. Prognostic factors were evaluated using the Cox proportional hazards model.</p> <p>Results</p> <p>Pre-operative ASA score was the only factor that significantly influenced outcome. Neck incision for cervical perforation (n = 8) and treatment with a covered stent with or without open drainage for a thoracic perforation (n = 6) had the lowest mortality. Esophageal resection (n = 8) had the highest mortality. A CAT scan or an oesophageal X-ray with oral contrast were the most efficient diagnostic tools. The preferred treatment strategy changed over the course of the study period, from a more aggressive surgical approach towards using covered stents to seal the perforation.</p> <p>Conclusion</p> <p>Pre-operative ASA score was the only factor that significantly influenced outcome in this study. Treatment strategies are changing as less traumatic options have become available. Sealing an esophageal perforation with a covered stent, in combination with open or closed drainage when necessary, is a promising treatment strategy.</p

Neuroanatomical Abnormalities in Violent Individuals with and without a Diagnosis of Schizophrenia

Several structural brain abnormalities have been associated with aggression in patients with schizophrenia. However, little is known about shared and distinct abnormalities underlying aggression in these subjects and non-psychotic violent individuals. We applied a region-of interest volumetric analysis of the amygdala, hippocampus, and thalamus bilaterally, as well as whole brain and ventricular volumes to investigate violent (n = 37) and non-violent chronic patients (n = 26) with schizophrenia, non-psychotic violent (n = 24) as well as healthy control subjects (n = 24). Shared and distinct volumetric abnormalities were probed by analysis of variance with the factors violence (non-violent versus violent) and diagnosis (non-psychotic versus psychotic), adjusted for substance abuse, age, academic achievement and negative psychotic symptoms. Patients showed elevated vCSF volume, smaller left hippocampus and smaller left thalamus volumes. This was particularly the case for non-violent individuals diagnosed with schizophrenia. Furthermore, patients had reduction in right thalamus size. With regard to left amygdala, we found an interaction between violence and diagnosis. More specifically, we report a double dissociation with smaller amygdala size linked to violence in non-psychotic individuals, while for psychotic patients smaller size was linked to non-violence. Importantly, the double dissociation appeared to be mostly driven by substance abuse. Overall, we found widespread morphometric abnormalities in subcortical regions in schizophrenia. No evidence for shared volumetric abnormalities in individuals with a history of violence was found. Finally, left amygdala abnormalities in non-psychotic violent individuals were largely accounted for by substance abuse. This might be an indication that the association between amygdala reduction and violence is mediated by substance abuse. Our results indicate the importance of structural abnormalities in aggressive individuals

High Solid Acrylic–Melamine Latexes with Tunable Crosslinking Capability

Miniemulsion polymerization is employed to produce high solid content (50%) acrylic/melamine latexes with varied crosslinking capability, for their potential application as waterborne crosslinkable coatings. This synthesis strategy allows the efficient incorporation of a hydrophobic crosslinker, iso-butylated melamine (iBMF), into polymer particles, and to obtain latexes with different iBMF concentrations and acrylic polymer with varied content of hydroxylic groups (OH–). The involved crosslinking mechanisms and the physical transformations during film thermosetting of acrylic/iBMF nanocomposite are exhaustively investigated by combining thermal, spectroscopic, and thermo-mechanical analyses. The influence of reactive groups concentration (iBMF and OH– content in the acrylic polymer) on the rate of curing, the crosslinking degree, and consequently onto the sensitive properties of cured films are discussed here.Fil: Cordoba, Carlos Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Ronco, Ludmila Irene. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Barrios, Celina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Gugliotta, Luis Marcelino. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; ArgentinaFil: Minari, Roque Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto de Desarrollo Tecnológico para la Industria Química. Universidad Nacional del Litoral. Instituto de Desarrollo Tecnológico para la Industria Química; Argentin