Hybrid nanofabrication processes utilizing diblock copolymer nanotemplate prepared by self-assembled monolayer based surface neutralization

Nanostructures including nanohole and metal dot arrays were fabricated by hybrid processes combing self-assembled diblock copolymer and conventional semiconductor processes. The interfacial energy between polystyrene-b-polymethylmetacrylate (PS-b-PMMA) diblock copolymer and substrate surface was controlled by employing a self-assembled monolayer (SAM), resulting in a polymer template with well-ordered cylindrical nanohole array. The nanohole sizes were controlled within 10 to 22 nm in diameter using block copolymers with different molecular weights. The PS nanotemplates were fabricated on various substrates, including oxides, nitrides, and poly-Si. Nanohole pattern was transferred by dry etching process, producing inorganic nanohole templates. Also, gold nanodot arrays with diameter smaller than 10 nm were fabricated through lift off process. (c) 2008 American Vacuum Society.open112020sciescopu

Predicting disease progression in progressive supranuclear palsy in multicenter clinical trials

INTRODUCTION: Clinical and MRI measurements can track disease progression in PSP, but many have not been extensively evaluated in multicenter clinical trials. We identified optimal measures to capture clinical decline and predict disease progression in multicenter PSP trials. METHODS: Longitudinal clinical rating scales, neuropsychological test scores, and volumetric MRI data from an international, phase 2/3 clinical trial of davunetide for PSP (intent to treat population, n = 303) were used to identify measurements with largest effect size, strongest correlation with clinical change, and best ability to predict dropout or clinical decline over one year as measured by PSP Rating Scale (PSPRS). RESULTS: Baseline cognition as measured by Repeatable Battery for Assessing Neuropsychological Status (RBANS) was associated with attrition, but had only a small effect. PSPRS and Clinical Global Impression (CGI) had the largest effect size for measuring change. Annual change in CGI, RBANS, color trails, and MRI midbrain and ventricular volumes were most strongly correlated with annual PSPRS and had the largest effect sizes for detecting annual change. At baseline, shorter disease duration, more severe depression, and lower performance on RBANS and executive function tests were associated with faster worsening of the PSPRS in completers. With dropouts included, SEADL, RBANS, and executive function tests had significant effect on PSPRS trajectory of change. CONCLUSION: Baseline cognitive status and mood influence the rate of disease progression in PSP. Multiple clinical, neuropsychological, and volumetric MRI measurements are sensitive to change over one year in PSP and appropriate for use in multicenter clinical trials

Ecological Modeling of Aedes aegypti (L.) Pupal Production in Rural Kamphaeng Phet, Thailand

Background - Aedes aegypti (L.) is the primary vector of dengue, the most important arboviral infection globally. Until an effective vaccine is licensed and rigorously administered, Ae. aegypti control remains the principal tool in preventing and curtailing dengue transmission. Accurate predictions of vector populations are required to assess control methods and develop effective population reduction strategies. Ae. aegypti develops primarily in artificial water holding containers. Release recapture studies indicate that most adult Ae. aegypti do not disperse over long distances. We expect, therefore, that containers in an area of high development site density are more likely to be oviposition sites and to be more frequently used as oviposition sites than containers that are relatively isolated from other development sites. After accounting for individual container characteristics, containers more frequently used as oviposition sites are likely to produce adult mosquitoes consistently and at a higher rate. To this point, most studies of Ae. aegypti populations ignore the spatial density of larval development sites. Methodology - Pupal surveys were carried out from 2004 to 2007 in rural Kamphaeng Phet, Thailand. In total, 84,840 samples of water holding containers were used to estimate model parameters. Regression modeling was used to assess the effect of larval development site density, access to piped water, and seasonal variation on container productivity. A varying-coefficients model was employed to account for the large differences in productivity between container types. A two-part modeling structure, called a hurdle model, accounts for the large number of zeroes and overdispersion present in pupal population counts. Findings - The number of suitable larval development sites and their density in the environment were the primary determinants of the distribution and abundance of Ae. aegypti pupae. The productivity of most container types increased significantly as habitat density increased. An ecological approach, accounting for development site density, is appropriate for predicting Ae. aegypti population levels and developing efficient vector control program

Micro-manufacturing : research, technology outcomes and development issues

Besides continuing effort in developing MEMS-based manufacturing techniques, latest effort in Micro-manufacturing is also in Non-MEMS-based manufacturing. Research and technological development (RTD) in this field is encouraged by the increased demand on micro-components as well as promised development in the scaling down of the traditional macro-manufacturing processes for micro-length-scale manufacturing. This paper highlights some EU funded research activities in micro/nano-manufacturing, and gives examples of the latest development in micro-manufacturing methods/techniques, process chains, hybrid-processes, manufacturing equipment and supporting technologies/device, etc., which is followed by a summary of the achievements of the EU MASMICRO project. Finally, concluding remarks are given, which raise several issues concerning further development in micro-manufacturing

Microfluidic cell sorter with integrated piezoelectric actuator

We demonstrate a low-power (<0.1 mW), low-voltage (<10 Vp-p) on-chip piezoelectrically actuated micro-sorter that can deflect single particles and cells at high-speed. With rhodamine in the stream, switching of flow between channels can be visualized at high actuation frequency (~1.7 kHz). The magnitude of the cell deflection can be precisely controlled by the magnitude and waveform of input voltage. Both simulation and experimental results indicate that the drag force imposed on the suspended particle/cell by the instantaneous fluid displacement can alter the trajectory of the particle/cell of any size, shape, and density of interest in a controlled manner. The open-loop E. Coli cell deflection experiment demonstrates that the sorting mechanism can produce a throughput of at least 330 cells/s, with a promise of a significantly higher throughput for an optimized design. To achieve close-loop sorting operation, fluorescence detection, real-time signal processing, and field-programmable-gate-array (FPGA) implementation of the control algorithms were developed to perform automated sorting of fluorescent beads. The preliminary results show error-free sorting at a sorting efficiency of ~70%. Since the piezoelectric actuator has an intrinsic response time of 0.1–1 ms and the sorting can be performed under high flowrate (particle speed of ~1–10 cm/s), the system can achieve a throughput of >1,000 particles/s with high purity

Neck circumference is associated with adipose tissue content in thigh skeletal muscle in overweight and obese premenopausal women

Neck circumference (NC) has been proposed as a simple and practical tool, independently associated with cardiometabolic risk factors. However, the association of NC with inter-muscular adipose tissue (IMAT) is still to be determined. We aimed to examine the association of NC with thigh IMAT, and visceral adipose tissue (VAT) measured with computed tomography (CT) in overweight/obese women. 142 premenopausal overweight and obese Caucasian women participated in this crosssectional study. NC was measured with an inextensible metallic tape above the thyroid cartilage according to International Society for Advancement of Kinanthropometry protocol. Thigh IMAT and VAT volumes were measured with a single cross-sectional CT. Regarding the covariates, fat mass (FM) was assessed with dual-energy x-ray absorptiometry and physical activity was objectively measured with accelerometry. NC was positively associated with thigh IMAT and VAT volumes (standardized β coefcient: β=0.45, P-value= ≤0.001, β=0.60, P=≤0.001; respectively), which persisted after adjusting for age, height, overall FM or moderate-to-vigorous physical activity. Our fndings show that NC is associated with thigh IMAT volume in overweight and obese premenopausal Caucasian women, regardless of the amount of lower-body fatness. These results suggest underscoring the relevance of NC as a marker of adipose tissue content in thigh skeletal muscle.Portuguese Foundation for Science and Technology Sapiens 358007/99Oeiras City CouncilBecel PortugalRoche Pharmaceuticals PortugalCompal PortugalUniversity of Granada Plan Propio de Investigacion 2016 -Excellence actions: Unit of Excellence on Exercise and Health (UCEES)Junta de AndaluciaEuropean Union (EU) SOMM17/6107/UGRFundacion Carolina C.201657496

Inactivation and sub-lethal injury of salmonella typhi, salmonella typhimurium and vibrio cholerae in copper water storage vessels

Background: This study provides information on the antibacterial effect of copper against the water-borne pathogens Salmonella Typhi, Salmonella Typhimurium and Vibrio cholerae. Methods: Suspensions of each pathogen were kept in water within a traditional copper vessel at 30°C for 24 h. Samples were withdrawn, diluted and plated onto suitable growth media. Conventional enumeration of healthy (uninjured) bacteria was carried out using standard aerobic incubation conditions. Additionally, reactive oxygen species-neutralised (ROS-n) conditions were achieved by adding the peroxide scavenger sodium pyruvate to the medium with anaerobic incubation, to enumerate uninjured (ROS-insensitive) and injured (ROS-sensitive) bacteria. Differences between log-transformed means of conventional (aerobic) and ROS-n counts were statistically evaluated using t tests. Results: Overall, all three pathogens were inactivated by storage in copper vessels for 24 h. However, for shorter-term incubation (4-12 h), higher counts were observed under ROS-n conditions than under aerobic conditions, which demonstrate the presence of substantial numbers of sub-lethally injured cells prior to their complete inactivation. Conclusions: The present study has for the first time confirmed that these bacterial pathogens are inactivated by storage in a copper vessel within 24 h. However, it has also demonstrated that it is necessary to account for short-term sub-lethal injury, manifest as ROS-sensitivity, in order to more fully understand the process. This has important practical implications in terms of the time required to store water within a copper vessel to completely inactivate these bacteria and thereby remove the risk of water-borne disease transmission by this route

Informal Urban Settlements and Cholera Risk in Dar es Salaam, Tanzania

In 2008, for the first time in human history, more than half of the world's population was living in urban areas, and this proportion is expected to increase. As a result of poor economic opportunities and an increasing shortage of affordable housing, much of the spatial growth in many of the world's fastest growing cities is a result of the expansion of informal settlements where residents live without security of tenure and with limited access to basic infrastructure. Although inadequate water and sanitation facilities, crowding, and other poor living conditions can have a significant impact on the spread of infectious diseases, analyses relating these diseases to ongoing global urbanization, especially at the neighborhood and household level in informal settlements, have been infrequent. To begin to address this deficiency, we analyzed urban environmental data and the burden of cholera in Dar es Salaam, Tanzania. We found that cholera incidence was most closely associated with informal housing, population density, and the income level of informal residents. Our analysis suggests that the current growth of many cities in developing countries and expansion of informal settlements will be associated with increased risks to human health, including cholera and other infectious diseases, and underscores the importance of urban planning, resource allocation, and infrastructure placement and management, as the rapidly progressive trend of global urbanization proceeds