Titanium versus absorbable tacks comparative study (TACS): a multicenter, non-inferiority prospective evaluation during laparoscopic repair of ventral and incisional hernia: study protocol for randomized controlled trial

BACKGROUND: Laparoscopic repair of ventral and incisional hernias has gained popularity since many studies have reported encouraging results in terms of outcomee and recurrence. Choice of mesh and fixation methods are considered crucial issues in preventing recurrences and complications. Lightweight meshes are considered the first choice due to their biomechanical properties and the ability to integrate into the abdominal wall. Titanium helicoidal tacks still represent the "gold standard" for mesh fixation, even if they have been suggested to be involved in the genesis of post-operative pain and complications. Recently, absorbable tacks have been introduced, under the hypothesis that there will be no need to maintain a permanent fixation device after mesh integration. Nevertheless, there is no evidence that absorbable tacks may guarantee the same results as titanium tacks in terms of strength of fixation and recurrence rates. The primary end point of the present trial is to test the hypothesis that absorbable tacks are non-inferior to titanium tacks in laparoscopic incisional and ventral hernia repair (LIVHR) by lightweight polypropylene mesh, in terms of recurrence rates at 3-year follow-up. Surgical complications, post-operative stay, comfort and pain are secondary end points to be assessed. METHODS/DESIGN: Two hundred and twenty patients with ventral hernia will be randomized into 2 groups: Group A (110) patients will be submitted to LIVHR by lightweight polypropylene mesh fixed by titanium tacks; Group B (110) patients will be submitted to LIVHR by lightweight polypropylene mesh fixed by absorbable tacks. DISCUSSION: A few retrospective studies have reported similar results when comparing absorbable versus non-absorbable tacks in terms of intraoperative and early post-operative outcomes. These studies have the pitfalls to be retrospective evaluation of small series of patients, and the reported results still need to be validated by larger series and prospective studies. The aim of the present trial is to investigate and test the non-inferiority of absorbable versus non-absorbable tacks in terms of hernia recurrence rates, in order to assess whether the use of absorbable tacks may achieve the same results as non-absorbable tacks in mid-term and long-term settings

A glance into mthfr deficiency at a molecular level

MTHFR deficiency still deserves an investigation to associate the phenotype to protein structure variations. To this aim, considering the MTHFR wild type protein structure, with a catalytic and a regulatory domain and taking advantage of state‐of‐the‐art computational tools, we explore the properties of 72 missense variations known to be disease associated. By computing the thermodynamic ΔΔG change according to a consensus method that we recently introduced, we find that 61% of the disease‐related variations destabilize the protein, are present both in the catalytic and regulatory domain and correspond to known biochemical deficiencies. The propensity of solvent accessible residues to be involved in protein‐protein interaction sites indicates that most of the interacting residues are located in the regulatory domain, and that only three of them, located at the interface of the functional protein homodimer, are both disease‐related and destabilizing. Finally, we compute the protein architecture with Hidden Markov Models, one from Pfam for the catalytic domain and the second computed in house for the regulatory domain. We show that patterns of disease‐associated, physicochemical variation types, both in the catalytic and regulatory domains, are unique for the MTHFR deficiency when mapped into the protein architecture

Annotated real and synthetic datasets for non-invasive foetal electrocardiography post-processing benchmarking

Non-invasive foetal electrocardiography (fECG) can be obtained at different gestational ages by means of surface electrodes applied on the maternal abdomen. The signal-to-noise ratio (SNR) of the fECG is usually low, due to the small size of the foetal heart, the foetal-maternal compartment, the maternal physiological interferences and the instrumental noise. Even after powerful fECG extraction algorithms, a post-processing step could be required to improve the SNR of the fECG signal. In order to support the researchers in the field, this work presents an annotated dataset of real and synthetic signals, which was used for the study “Wavelet Denoising as a Post-Processing Enhancement Method for Non-Invasive Foetal Electrocardiography” [1]. Specifically, 21 15 s-long fECG, dual-channel signals obtained by multi-reference adaptive filtering from real electrophysiological recordings were included. The annotation of the foetal R peaks by an expert cardiologist was also provided. Recordings were performed on 17 voluntary pregnant women between the 21st and the 27th week of gestation. The raw recordings were also included for the researchers interested in applying a different fECG extraction algorithm. Moreover, 40 10 s-long synthetic non-invasive fECG were provided, simulating the electrode placement of one of the abdominal leads used for the real dataset. The annotation of the foetal R peaks was also provided, as generated by the FECGSYN tool used for the signals’ creation. Clean fECG signals were also included for the computation of indexes of signal morphology preservation. All the signals are sampled at 2048 Hz. The data provided in this work can be used as a benchmark for fECG post-processing techniques but can also be used as raw signals for researchers interested in foetal QRS detection algorithms and fECG extraction methods

Wavelet denoising as a post-processing enhancement method for non-invasive foetal electrocardiography

Background and Objective: The detection of a clean and undistorted foetal electrocardiogram (fECG) from non-invasive abdominal recordings is an open research issue. Several physiological and instrumental noise sources hamper this process, even after that powerful fECG extraction algorithms have been used. Wavelet denoising is widely used for the improvement of the SNR in biomedical signal processing. This work aims to systematically assess conventional and unconventional wavelet denoising approaches for the post-processing of fECG signals by providing evidence of their effectiveness in improving fECG SNR while preserving the morphology of the signal of interest. Methods: The stationary wavelet transform (SWT) and the stationary wavelet packet transform (SWPT) were considered, due to their different granularity in the sub-band decomposition of the signal. Three thresholds from the literature, either conventional (Minimax and Universal) and unconventional, were selected. To this aim, the unconventional one was adapted for the first time to SWPT by trying different approaches. The decomposition depth was studied in relation to the characteristics of the fECG signal. Synthetic and real datasets, publicly available for benchmarking and research, were used for quantitative analysis in terms of noise reduction, foetal QRS detection performance and preservation of fECG morphology. Results: The adoption of wavelet denoising approaches generally improved the SNR. Interestingly, the SWT methods outperformed the SWPT ones in morphology preservation (p<0.04) and SNR (p<0.0003), despite their coarser granularity in the sub-band analysis. Remarkably, the Han et al. threshold, adopted for the first time for fECG processing, provided the best quality improvement (p<0.003). Conclusions: The findings of our systematic analysis suggest that particular care must be taken when selecting and using wavelet denoising for non-invasive fECG signal post-processing. In particular, despite the general noise reduction capability, signal morphology can be significantly altered on the basis of the parameterization of the wavelet methods. Remarkably, the adoption of a finer sub-band decomposition provided by the wavelet packet was not able to improve the quality of the processing

Robotic treatment of colorectal endometriosis: technique, feasibility and short-term results

background: Deep infiltrating endometriosis (DIE) is a complex disease that impairs the quality of life and the fertility of women. Since a medical approach is often insufficient, a minimally invasive approach is considered the gold standard for complete disease excision. Roboticassisted surgery is a revolutionary approach, with several advantages compared with traditional laparoscopic surgery. methods: From March 2010 to May 2011, we performed 22 consecutive robotic-assisted complete laparoscopic excisions of DIE endometriosis with colorectal involvement. All clinical data were collected by our team and all patients were interviewed preoperatively and 3 and 6 months post-operatively and yearly thereafter regarding endometriosis-related symptoms. Dysmenorrhoea, dyschezia, dyspareunia and dysuria were evaluated with a 10-point analog rating scale. results: There were 12 patients, with a median larger endometriotic nodule of 35 mm, who underwent segmental resection, and 10 patients, with a median larger endometriotic nodule of 30 mm, who underwent complete nodule debulking by colorectal wall-shaving technique. No laparotomic conversions were performed, nor was any blood transfusion necessary. No intra-operative complications were observed and, in particular, there were no inadvertent rectal perforations in any of the cases treated by the shaving technique. None of the patients had ileostomy or colostomy. No major post-operative complications were observed, except one small bowel occlusion 14 days post-surgery that was resolved in 3 days with medical treatment. Post-operatively, a statistically significant improvement of patient symptoms was shown for all the investigated parameters. conclusions: To our knowledge, this is the first study reporting the feasibility and short-term results and complications of laparoscopic robotic-assisted treatment of DIE with colorectal involvement.We demonstrate that this approach is feasible and safe, without conversion to laparotomy

Parylene C-based, breathable tattoo electrode for high-quality biopotential measurements

A breathable tattoo electrode for bio-potential recording based on a Parylene C nanofilm is presented in this study. The proposed approach allows for the fabrication of micro-perforated epidermal submicrometer-thick electrodes that conjugate the unobtrusiveness of Parylene C nanofilms and the very important feature of breathability. The electrodes were fully validated for electrocardiography (ECG) measurements showing performance comparable to that of conventional disposable gelled Ag/AgCl electrodes, with no visible negative effect on the skin even many hours after their application. This result introduces interesting perspectives in the field of epidermal electronics, particularly in applications where critical on-body measurements are involved

The X-Gamma Imaging Spectrometer (XGIS) onboard THESEUS

A compact and modular X and gamma-ray imaging spectrometer (XGIS) has been designed as one of the instruments foreseen on-board the THESEUS mission proposed in response to the ESA M5 call. The experiment envisages the use of CsI scintillator bars read out at both ends by single-cell 25 mm 2 Silicon Drift Detectors. Events absorbed in the Silicon layer (lower energy X rays) and events absorbed in the scintillator crystal (higher energy X rays and Gamma-rays) are discriminated using the on-board electronics. A coded mask provides imaging capabilities at low energies, thus allowing a compact and sensitive instrument in a wide energy band (~2 keV up to ~20 MeV). The instrument design, expected performance and the characterization performed on a series of laboratory prototypes are discussed.Comment: To be published in the Proceedings of the THESEUS Workshop 2017 (http://www.isdc.unige.ch/theseus/workshop2017.html), Journal of the Italian Astronomical Society (Mem.SAIt), Editors L. Amati, E. Bozzo, M. Della Valle, D. Gotz, P. O'Brien. Details on the THESEUS mission concept can be found in the white paper Amati et al. 2017 (arXiv:171004638) and Stratta et al. 2017 (arXiv:1712.08153

Development and tests of a new prototype detector for the XAFS beamline at Elettra Synchrotron in Trieste

The XAFS beamline at Elettra Synchrotron in Trieste combines X-ray absorption spectroscopy and X-ray diffraction to provide chemically specific structural information of materials. It operates in the energy range 2.4-27 keV by using a silicon double reflection Bragg monochromator. The fluorescence measurement is performed in place of the absorption spectroscopy when the sample transparency is too low for transmission measurements or the element to study is too diluted in the sample. We report on the development and on the preliminary tests of a new prototype detector based on Silicon Drift Detectors technology and the SIRIO ultra low noise front-end ASIC. The new system will be able to reduce drastically the time needed to perform fluorescence measurements, while keeping a short dead time and maintaining an adequate energy resolution to perform spectroscopy. The custom-made silicon sensor and the electronics are designed specifically for the beamline requirements.Comment: Proceeding of the 6YRM 12th-14th Oct 2015 - L'Aquila (Italy). Accepted for publication on Journal of Physics: Conference Serie

Loss of PALB2 predicts poor prognosis in acute myeloid leukemia and suggests novel therapeutic strategies targeting the DNA repair pathway

Dear Editor, Acute myeloid leukemia (AML) patients carrying complex karyotype or aneuploidies have a very poor prognosis, with a 5-year overall survival (OS) <20%1. We and others have shown that these patients are characterized by high genomic instability, along with defects of DNA damage response (DDR) genes2,3