The knowledge needs of innovating organisations

The sustainable management of innovation is perhaps the single most vital element of executive work in today's business environment. This has driven knowledge management theorists to revitalise interest in the concept of 'competency'. However, this theoretical domain continues to be fragmented by definitional debate. At a micro-level of analysis, Human Resources Management theorists have embraced the idea of managerial competencies, resulting in the elaboration of frameworks and standards of performance for the targeted development of individual knowledge. By contrast, at the macrolevel the Strategic Management literature has focussed on developing new concepts of competition and cooperation that emphasise organisational knowledge as the driver of strategic change. In this context, competence-based competition implies that competitive advantage is bestowed by an organisation's unique combination of core competencies. This definitional debate is a major obstacle to the development of an integrated perspective on competency and the knowledge needs of innovating organisations. This conceptual article asserts that, since innovation involves a learning process, it is necessary to develop process-based theory rather than the static categorisations that currently dominate thinking in this area. Drawing on theories from the field of learning, the article proposes a three-dimensional framework of knowledge-based competencies that are interlinked and meaningful across levels of analysis

Petascale computations for Large-scale Atomic and Molecular collisions

Petaflop architectures are currently being utilized efficiently to perform large scale computations in Atomic, Molecular and Optical Collisions. We solve the Schroedinger or Dirac equation for the appropriate collision problem using the R-matrix or R-matrix with pseudo-states approach. We briefly outline the parallel methodology used and implemented for the current suite of Breit-Pauli and DARC codes. Various examples are shown of our theoretical results compared with those obtained from Synchrotron Radiation facilities and from Satellite observations. We also indicate future directions and implementation of the R-matrix codes on emerging GPU architectures.Comment: 14 pages, 5 figures, 3 tables, Chapter in: Workshop on Sustained Simulated Performance 2013, Published by Springer, 2014, edited by Michael Resch, Yevgeniya Kovalenko, Eric Focht, Wolfgang Bez and Hiroaki Kobaysah

A waveguide polarization toolset design based on mode beating

A toolset of waveguide elements is examined, which can be combined to produce polarization functional devices in a single contiguous waveguide. In particular, waveguide implementations of an optical isolator and a polarization modulator are discussed. The waveguide elements, i.e., quasi-phase-matched nonreciprocal polarization mode converter, reciprocal polarization mode converter (R-PMC), and a differential phase shifter, are all based on mode beating. A universal 3-dB R-PMC specification is identified, which suffices for all the polarization functional devices considered here. A full-vectorial modesolver is used to determine the modes in a number of example III–V waveguide structures, and the polarization state evolution is considered by using an averaged Stokes vector illustrated on the Poincaré sphere constr

Reviving the Macrobrachium rosenbergii (de Man) fishery in Vembanad Lake, India

In Vembanad Lake and its confluent rivers (Kerala, India), the catches of Macrobrachium rosenbergii (de Man) were reported to have dwindled to a mere 39 t in the 1980s from average landings of 300 t during the 1960s. This decline is due to the impact of a number of human interventions affecting the ecosystem and, hence, the stocks of M. rosenbergii. Monitoring of landings in 1994-1995 and 1995-1996 indicates an improvement in catches. This paper discusses the reasons for the decline and revival in stocks and suggestions for their replenishment

Quasi-phase matching magneto-optical waveguides

<p>Photonic integration has proved remarkably successful in combining multiple optical devices onto a single chip with the benefits of added functionality, and reduction in costs, arising from the replacement of manual assembly and alignment of individual components with lithographic techniques. However, the incorporation of optical isolators and related non-reciprocal devices within standard optoelectronic wafer platforms is exceptionally challenging. Preferred magneto-optic materials cannot be exploited as waveguide core layers on semiconductor wafers due to a lower refractive index. Another difficulty is the phase velocity mismatch as a consequence of the inherent structural birefringence associated with waveguide geometries.</p> <p>Our approach to the integration of an optical isolator with a III-V semiconductor laser involves combining a nonreciprocal mode converter with a reciprocal mode converter, based on an asymmetric profiled rib waveguide, fabricated by Reactive Ion Etching. We demonstrate that suitably tapered waveguides can be employed to connect the mode converter to other sections thereby avoiding problems caused by mode-matching and reflections from the section interfaces.</p> <p>The nonreciprocal mode converter is formed from a continuation of the III-V semiconductor waveguide core with a magneto-optic upper cladding so that Faraday rotation occurs through the interaction of the evanescent tail. The phase velocity mismatch due to the waveguide birefringence is overcome using a quasi-phase-matching approach. Lithography is used to pattern the top cladding so that the film immediately on top of the waveguide core alternates between magnetooptic and a non-magneto-optic dielectric of a similar refractive index. Our first demonstrations used a dielectric (silica or silicon nitride) patterned by etching, or lift-off, on top of a GaAs rib waveguide, over which was deposited a magneto-optic film. This film was deposited by sputtering from a Ce:YIG target and demonstrated magnetic hysteresis, but, as it was not annealed, it was believed to consist of Ce:YIG and/or gamma iron oxide microcrystallites embedded in an amorphous matrix. With quasi-phase-matching periods of 110–160 μm and a waveguide length of 8 mm, we were able to demonstrate up to 12% non-reciprocal TE- to TM-mode conversion around a wavelength of 1.3 μm using the remanent magnetisation.</p> <p>In order to enhance the magneto-optic effect it is desirable to anneal such films. However the mismatch in thermal expansion coefficients results in a catastrophic failure of samples with large area film coverage. This problem has been shown to be alleviated by patterning the YIG film. Unfortunately wet-etching of YIG also etches (Al)GaAs and, therefore, the development of a lift-off process for YIG deposition has been undertaken. Initial results are promising with ∼100 μm×2.5 μm YIG sections deposited on a GaAs layer which remain intact after an anneal in an oxygen atmosphere.</p&gt

Circular 16

Edda, an introduction from Sweden, was recommended for the first tim e in 195 I for all barley-growing areas of Alaska. About 200 bushels of this new barley variety were available for distribution to Alaska growers in 195 I through the Alaska Agricultural Experiment Station. Because Edda is early, stiff-strawed, highyielding, and of good quality it is expected to have an im portant place in the production of feed and seed in the Territory. A nalytical chemical determ inations suggest that Edda is at least equal in feeding value to similar varieties grown in Alaska and to Stateside barleys.In cooperation with the United States Department of Agriculture, Agricultural Research Administratio

Unraveling the rapid radiation of crested newts, Triturus cristatus superspecies, using complete mitogenomic sequences

Background - The rapid radiation of crested newts (Triturus cristatus superspecies) comprises four morphotypes: 1) the T. karelinii group, 2) T. carnifex - T. macedonicus, 3) T. cristatus and 4) T. dobrogicus. These vary in body build and the number of rib-bearing pre-sacral vertebrae (NRBV). The phylogenetic relationships of the morphotypes have not yet been settled, despite several previous attempts, employing a variety of molecular markers. We here resolve the crested newt phylogeny by using complete mitochondrial genome sequences. Results - Bayesian inference based on the mitogenomic data yields a fully bifurcating, significantly supported tree, though Maximum Likelihood inference yields low support values. The internal branches connecting the morphotypes are short relative to the terminal branches. Seen from the root of Triturus (NRBV = 13), a basal dichotomy separates the T. karelinii group (NRBV = 13) from the remaining crested newts. The next split divides the latter assortment into T. carnifex - T. macedonicus (NRBV = 14) versus T. cristatus (NRBV = 15) and T. dobrogicus (NRBV = 16 or 17). Conclusions - We argue that the Bayesian full mitochondrial DNA phylogeny is superior to previous attempts aiming to recover the crested newt species tree. Furthermore, our new phylogeny involves a maximally parsimonious interpretation of NRBV evolution. Calibrating the phylogeny allows us to evaluate potential drivers for crested newt cladogenesis. The split between the T. karelinii group and the three other morphotypes, at ca. 10.4 Ma, is associated with the separation of the Balkan and Anatolian landmasses (12-9 Ma). No currently known vicariant events can be ascribed to the other two splits, first at ca. 9.3 Ma, separating T. carnifex - T. macedonicus, and second at ca. 8.8 Ma, splitting T. cristatus and T. dobrogicus. The crested newt morphotypes differ in the duration of their annual aquatic period. We speculate on the role that this ecological differentiation could have played during speciatio

Import procedures for timber to the European Union : options for streamlining procedures for legal timber

This report provides a description of the institutions involved in timber import and an overview of import procedures and related documents in the Netherlands in the framework of the European Union Action Plan for Forest Law Enforcement, Governance and Trade (FLEGT). FLEGT aims at establishing Voluntary Partnership Agreements (VPAs) between the EU and timber producing countries. The report includes recommendations with respect to streamlining import procedures and electronic document handling

Pinning of stripes by local structural distortions in cuprate high-Tc superconductors

We study the spin-density wave (stripe) instability in lattices with mixed low-temperature orthorhombic (LTO) and low-temperature tetragonal (LTT) crystal symmetry. Within an explicit mean-field model it is shown how local LTT regions act as pinning centers for static stripe formation. We calculate the modulations in the local density of states near these local stripe regions and find that mainly the coherence peaks and the van Hove singularity (VHS) are spatially modulated. Lastly, we use the real-space approach to simulate recent tunneling data in the overdoped regime where the VHS has been detected by utilizing local normal state regions.Comment: Conference proceedings for Stripes1

Using C-Tool to simulate soil carbon and radiocarbon development

Tho model framework C-TOOL was used to simulate soil carbon and radiocarbon development. A simple three-compartment model was sufficient for describing the data