The potential of artificial aging for modelling of natural aging processes of ballpoint ink

Artificial aging has been used to reproduce natural aging processes in an accelerated pace. Questioned documents were exposed to light or high temperature in a well-defined manner in order to simulate an increased age. This may be used to study the aging processes or to date documents by reproducing their aging curve. Ink was studied especially because it is deposited on the paper when a document, such as a contract, is produced. Once on the paper, aging processes start through degradation of dyes, solvents drying and resins polymerisation. Modelling of dye's and solvent's aging was attempted. These processes, however, follow complex pathways, influenced by many factors which can be classified as three major groups: ink composition, paper type and storage conditions. The influence of these factors is such that different aging states can be obtained for an identical point in time. Storage conditions in particular are difficult to simulate, as they are dependent on environmental conditions (e.g. intensity and dose of light, temperature, air flow, humidity) and cannot be controlled in the natural aging of questioned documents. The problem therefore lies more in the variety of different conditions a questioned document might be exposed to during its natural aging, rather than in the simulation of such conditions in the laboratory. Nevertheless, a precise modelling of natural aging curves based on artificial aging curves is obtained when performed on the same paper and ink. A standard model for aging processes of ink on paper is therefore presented that is based on a fit of aging curves to a power law of solvent concentrations as a function of time. A mathematical transformation of artificial aging curves into modelled natural aging curves results in excellent overlap with data from real natural aging processes

Lorentz invariance of entanglement classes in multipartite systems

We analyze multipartite entanglement in systems of spin-1/2 particles from a relativistic perspective. General conditions which have to be met for any classification of multipartite entanglement to be Lorentz invariant are derived, which contributes to a physical understanding of entanglement classification. We show that quantum information in a relativistic setting requires the partition of the Hilbert space into particles to be taken seriously. Furthermore, we study exemplary cases and show how the spin and momentum entanglement transforms relativistically in a multipartite setting.Comment: v2: 5 pages, 4 figures, minor changes to main body, journal references update

A simplex of bound entangled multipartite qubit states

We construct a simplex for multipartite qubit states of even number n of qubits, which has the same geometry concerning separability, mixedness, kind of entanglement, amount of entanglement and nonlocality as the bipartite qubit states. We derive the entanglement of the class of states which can be described by only three real parameters with the help of a multipartite measure for all discrete systems. We prove that the bounds on this measure are optimal for the whole class of states and that it reveals that the states possess only n-partite entanglement and not e.g. bipartite entanglement. We then show that this n-partite entanglement can be increased by stochastic local operations and classical communication to the purest maximal entangled states. However, pure n-partite entanglement cannot be distilled, consequently all entangled states in the simplex are n-partite bound entangled. We study also Bell inequalities and find the same geometry as for bipartite qubits. Moreover, we show how the (hidden) nonlocality for all n-partite bound entangled states can be revealed.Comment: 11 pages, 4 figures; 2nd version changed considerably and a detailed derivation of the multipartite measure is include

Interpreting diachronic size variation in prehistoric Central Asian cereal grains

The morphology of ancient cereal grains in Central Asia has been heavily discussed as an indicator of specific genetic variants, which are often linked to cultural factors or distinct routes of dispersal. In this paper, we present the largest currently existing database of barley (n = 631) and wheat (n = 349) measurements from Central Asia, obtained from two different periods at the Chap site (ca. 3,500 to 1,000 BC), located in the Tien Shan Mountains of Kyrgyzstan at 2,000 masl. The site is situated at the highest elevation ecocline for successful cereal cultivation and is, therefore, highly susceptible to minor climatic fluctuations that could force gradients up or down in the foothills. We contrast the Chap data with measurements from other second and first millennia BC sites in the region. An evident increase in average size over time is likely due to the evolution of larger grains or the introduction of larger variants from elsewhere. Additionally, site- or region-specific variation is noted, and we discuss potential influences for the formation of genetic varieties, including possible pleiotropic linkages and/or developmental responses to external factors, such as environmental fluctuations, climate, irrigation inputs, soil nutrients, pathologies, and seasonality. External factors acting on developmental or acclamatory responses in plants can be either natural or cultural. We argue that the study of long-term changes in grain morphology on the edges of crop-growing ranges can be informative regarding cultural and environmental constraints in the past.Introduction The chap site Methods Results - Chap Barley Measurements - Chap Wheat Measurements - Early Compact Barley Forms and the Change in Morphotypes Through Time Discussion - Plausible Drivers for Population-Scale Size Changes - Evolution of Ecotypes or Landraces - Pleiotropy - Developmental Plasticity - How to Test Diachronic Seed Changes Conclusio

Pistachio (Pistacia vera) domestication and dispersal out of Central Asia

The pistachio (Pistacia vera L.) is commercially cultivated in semi-arid regions around the globe. Archaeobotanical, genetic, and linguistic data suggest that the pistachio was brought under cultivation somewhere within its wild range, spanning southern Central Asia, northern Iran, and northern Afghanistan. Historically, pistachio cultivation has primarily relied on grafting, suggesting that, as with many Eurasian tree crops, domestication resulted from genetically locking hybrids or favored individuals in place. Plant domestication and dispersal research has largely focused on weedy, highly adaptable, self-compatible annuals; in this discussion, we present a case study that involves a dioecious long-lived perennialmdash;a domestication process that would have required a completely different traditional ecological knowledge system than that utilized for grain cultivation. We argue that the pistachio was brought under cultivation in southern Central Asia, spreading westward by at least 2000 years ago (maybe a few centuries earlier to the mountains of modern Syria) and moved eastward only at the end of the first millennium AD. The seeds remain rare in archaeological sites outside its native range, even into the mid-second millennium AD, and may not have been widely cultivated until the past few hundred years.1. Introduction 1.1. Botany and Ecology 1.2. Progenitor Range and Ecology 2. Domestication 2.1. Grafting and Pollination 2.2. Archaeobotanical and Historical Sources 2.3. Archaeobotany—Central Asian Data 3. Debated Early Evidence 4. Dispersal 5. Linguistics 6. Conclusion

Discovery of the VHE gamma-ray source HESS J1641-463

A new TeV source, HESS J1641-463, has been serendipitously discovered in the Galactic plane by the High Energy Stereoscopic System (H.E.S.S.) at a significance level of 8.6 standard deviations. The observations of HESS J1641-463 were performed between 2004 and 2011 and the source has a moderate flux level of 1.7% of the Crab Nebula flux at E > 1 TeV. HESS J1641-463 has a rather hard photon index of 1.99 +- 0.13_stat +- 0.20_sys. HESS J1641-463 is positionally coincident with the radio supernova remnant SNR G338.5+0.1, but no clear X-ray counterpart has been found in archival Chandra observations of the region. Different possible VHE production scenarios will be discussed in this contribution.Comment: 5 pages, 5 figures, 2012 Fermi Symposium proceedings - eConf C12102

Mass Spectrometry Imaging Disclosed Spatial Distribution of Defense-Related Metabolites in Triticum spp

Fusarium Head Blight is the most common fungal disease that strongly affects Triticum spp., reducing crop yield and leading to the accumulation of toxic metabolites. Several studies have investigated the plant metabolic response to counteract mycotoxins accumulation. However, information on the precise location where the defense mechanism is taking place is scarce. Therefore, this study aimed to investigate the specific tissue distribution of defense metabolites in two Triticum species and use this information to postulate on the metabolites’ functional role, unlocking the “location-to-function” paradigm. To address this challenge, transversal cross-sections were obtained from the middle of the grains. They were analyzed using an atmospheric-pressure (AP) SMALDI MSI source (AP-SMALDI5 AF, TransMIT GmbH, Giessen, Germany) coupled to a Q Exactive HF (Thermo Fisher Scientific GmbH, Bremen, Germany) orbital trapping mass spectrometer. Our result revealed the capability of (AP)-SMALDI MSI instrumentation to finely investigate the spatial distribution of wheat defense metabolites, such as hydroxycinnamic acid amides, oxylipins, linoleic and α-linoleic acids, galactolipids, and glycerolipids

Quarkonia production with the Hera-B experiment

Measurements of the dependence of the J/Psi production cross section on its kinematic variables as well as on the target atomic numbers for 920 GeV/c protons incident on different targets have been made with the Hera-B detector. The large collected di-lepton sample allows to study the production ratio of Psi(2S) to J/Psi and of Chic to J/Psi . We also report on measurements of the b-bbar and Upsilon production cross section.Comment: 9 pages, 11 figure

NUMERICAL STUDY OF THE GEOMETRIC INFLUENCE OF A FIN IN A CYLINDRICAL HEAT EXCHANGER FOR MELTING OF PCM

The thermal heat storage it’s an effective way to suit the energy availability with the demand schedule. It can be stored in the means of sensible or latent heat, the latter applying a material denominated Phase Change Material (PCM), which is provided as organic compounds, hydrated salts, paraffins, among others. The latent heat storage systems offer several advantages, like the practically isothermal process of loading and unloading and the high energy density. However, the low thermal conductivity makes the cycle prolonged on these systems, restricting its applicability. Applying computational fluid dynamics, the behavior of the PCM melting process was studied in cylindrical cavities with horizontal and vertical fins, aiming the optimization of the fin geometry. In this way the fin area was kept constant, varying its aspect ratio. The numerical model was validated with results from the literature and it’s composed of the continuity, momentum and energy equations increased by the phase change model. Qualitative and quantitative results are presented, referring to mesh independence, contours of velocity, net fraction and temperature at different moments of the process. The results of the study indicate that the position of the fin in the heat exchanger influences the melting process, although the vertical fins have a faster total melting process, horizontal fins can reach larger partial liquid fractions in less time in the heat exchanger. Such as the position of the fin, the increase of its length propitiates the reduction of the melting time, evidencing the optimal aspect ratio