1,320 research outputs found
Investigation of prediction methods for the loads and stresses of Apollo type spacecraft parachutes. Volume 1: Loads
An analysis was conducted with the objective of upgrading and improving the loads, stress, and performance prediction methods for Apollo spacecraft parachutes. The subjects considered were: (1) methods for a new theoretical approach to the parachute opening process, (2) new experimental-analytical techniques to improve the measurement of pressures, stresses, and strains in inflight parachutes, and (3) a numerical method for analyzing the dynamical behavior of rapidly loaded pilot chute risers
Quantum gravitational optics: the induced phase
The geometrical approximation of the extended Maxwell equation in curved
spacetime incorporating interactions induced by the vacuum polarization effects
is considered. Taking into account these QED interactions and employing the
analogy between eikonal equation in geometrical optics and Hamilton-Jacobi
equation for the particle motion, we study the phase structure of the modified
theory. There is a complicated, local induced phase which is believed to be
responsible for the modification of the classical picture of light ray. The
main features of QGO could be obtained through the study of this induced phase.
We discuss initial principles in conventional and modified geometrical optics
and compare the results.Comment: 10 pages, REVTex forma
Recommended from our members
Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design
The production of graphene reinforced aluminum matrix composite through powder metallurgical route requires optimization of process parameters to obtain better performance characteristics. One of the advanced method available for statistical analysis of parameters is Response Surface Methodology (RSM). The statistical analysis was carried out with three parameters, weight percentage of graphene reinforcement Wg (0.05%, 0.1% and 0.2%), stirring time ST(1h, 2h and 3h) and compaction pressure Pc(16T, 17T and 19T) while sintering temperature T kept constant. The performance of the Box Behnken design was analyzed and optimized using Design Expert software for the effective production of composites. From the results obtained from the analysis, the best set of parameters were considered for the future production of composites
Recommended from our members
Graphene and derivatives – Synthesis techniques, properties and their energy applications
2D nanomaterials with exceptional electrical, mechanical and thermal properties are promising reinforcing materials for fabricating high-performance composite materials. Rapid developments in nanotechnology in recent years have facilitated the development of advanced materials for functional devices. In particular, this review is focussed on the application of graphene nanoparticle-based composites (GNP's) and graphene derivatives in the fields of energy storage and conversion devices. This review focuses on these recent developments including the synthesis of graphene-based materials and its derivative, as well as the related achieved electrical, mechanical and thermal properties
Recommended from our members
Prediction of properties for the production and application of graphene reinforced metal matrix composites
This paper presents the development of finite element analysis (FEA) modelling for the prediction of the properties of the metal matrix composites (MMCs) reinforced with graphene. Process parameters taken into consideration were matrix metal (such as Al, Mg Ti, Ni, Cu and Fe) and volume fractions (1%, 5%, 10%, 15%, and 20%) of graphene. The FEA model was developed using ANSYS 14 based on the assumptions that it is free of voids and irregularities, and that the graphene sheets are perfectly aligned. Modelling results were discussed in relation to experimental data from the literature and also verified with theoretical methods; Rule of Mixtures (ROM) and Bettie’s reciprocal theorem. The comparative study of results obtained from the analysis of composite has shown that the properties such as Young's moduli and Poisson's ratio and electrical conductivity of the material are significantly enhanced by the reinforcing graphene in the metal matrix. In particular, it was found that there is a significant increase of longitudinal Young's modulus with increasing volume fraction of graphene reinforcement. Graphene reinforced MMCs has the capability as an advanced composite material of being applied in many highly demanding advanced engineering applications in aero, auto and energy industries. In this paper, the case for application of aluminium-graphene metal matrix composite as the material of choice for power transmission lines is elaborated
Recommended from our members
Mechanical properties of graphene oxide reinforced aluminium matrix composites
In this paper, the properties of powder metallurgy produced samples of GO reinforced aluminium composites were examined. Discs of 20 mm diameter and 0.5 mm thickness were made from pure Al powder of 35 μm particle size and with GO reinforcement at different GO wt% (0.05, 0.1 and 0.2). The mixture of Al/GO powders prepared through liquid infiltration were cold compacted and then sintered. The GO reinforced Al matrix composites were characterised using the scanning e lectron microscope with energy dispersion spectroscopy (SEM/ EDX ) for investigation of the homogeneous dispersion of GO into the matrix. X - ray diffraction (XRD) analysis for crystallographic phase and micro - Raman spectroscopy w as used to identify the phases inside the composite matrix after the sintering process. Micro hardness and the strength values from the produced Al/GO composites were recorded. It is evident from the results obtained that where uniform mixing is achieved, GO reinforced Al composites ca n be produced with similar hardness values as for those produced from rGO reinforced Al composites
Les corps étrangers en ORL: expérience de dix ans
Les corps étrangers (CE) représentent une pathologie fréquemment rencontrée en pratique ORL d'urgence. Ils peuvent constituer une urgence vitale par leur aspect ou leur siège. Nous présentons le bilan de dix ans sur la prise en charge des CE de la sphère ORL avec une revue de la littérature. Il s'agit d'une étude rétrospective entre Janvier 2004 et Décembre 2013, incluant tous les cas de CE des voies aéro-digestives supérieures et auriculaires colligés dans le service d'ORL au CHU Mohammed VI de Marrakech au Maroc. Sur les 1317 cas de CE de la sphère ORL colligés durant cette période, 80,48% concernaient les enfants. Le sex-ratio était de 1,5. L'âge moyen était de 12,92 ans. Les CE oesophagiens étaient les plus fréquents (47,53%). Les complications ont été rencontrées dans 11,69% des cas. Les CE dans la sphère ORL restent fréquents en pratique quotidienne surtout chez les enfants. Leur prise en charge nécessite une intervention rapide avec un matériel adapté et des médecins entrainés. La prévention reste la meilleure solution
Separability of Rotational Effects on a Gravitational Lens
We derive the deflection angle up to due to a Kerr gravitational
lens with mass and specific angular momentum . It is known that at the
linear order in and the Kerr lens is observationally equivalent to the
Schwarzschild one because of the invariance under the global translation of the
center of the lens mass. We show, however, nonlinear couplings break the
degeneracy so that the rotational effect becomes in principle separable for
multiple images of a single source. Furthermore, it is distinguishable also for
each image of an extended source and/or a point source in orbital motion. In
practice, the correction at becomes for the
supermassive black hole in our galactic center. Hence, these nonlinear
gravitational lensing effects are too small to detect by near-future
observations.Comment: 12 pages (RevTeX); accepted for publication in Phys. Rev.
- …