Is the Water Sector Lagging behind Education and Health on Aid Effectiveness? Lessons from Bangladesh, Ethiopia and Uganda

A study in three countries (Bangladesh, Ethiopia and Uganda) assessed progress against the Paris Principles for Aid Effectiveness (AE) in three sectors – water, health and education – to test the assumption that the water sector is lagging behind. The findings show that it is too simplistic to say that the water sector is lagging, although this may well be the case in some countries. The study found that wider governance issues are more important for AE than having in place sector-specific mechanics such as Sector-Wide Approaches alone. National political leadership and governance are central drivers of sector AE, while national financial and procurement systems and the behaviour of actors who have not signed up to the Paris Principles – at both national and global levels – have implications for progress that cut across sectors. Sectors and sub-sectors do nonetheless have distinct features that must be considered in attempting to improve sector-level AE. In light of these findings, using political economy approaches to better understand and address governance and strengthening sector-level monitoring is recommended as part of efforts to improve AE and development results in the water sector

Considering the impact of situation-specific motivations and constraints in the design of naturally ventilated and hybrid buildings

A simple logical model of the interaction between a building and its occupants is presented based on the principle that if free to do so, people will adjust their posture, clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. These adjustments are related to building design in two ways: first the freedom to adjust depends on the availability and ease-of-use of control options; second the use of controls affects building comfort and energy performance. Hence it is essential that these interactions are considered in the design process. The model captures occupant use of controls in response to thermal stimuli (too warm, too cold etc.) and non-thermal stimuli (e.g. desire for fresh air). The situation-specific motivations and constraints on control use are represented through trigger temperatures at which control actions occur, motivations are included as negative constraints and incorporated into a single constraint value describing the specifics of each situation. The values of constraints are quantified for a range of existing buildings in Europe and Pakistan. The integration of the model within a design flow is proposed and the impact of different levels of constraints demonstrated. It is proposed that to minimise energy use and maximise comfort in naturally ventilated and hybrid buildings the designer should take the following steps: 1. Provide unconstrained low energy adaptive control options where possible, 2. Avoid problems with indoor air quality which provide motivations for excessive ventilation rates, 3. Incorporate situation-specific adaptive behaviour of occupants in design simulations, 4. Analyse the robustness of designs against variations in patterns of use and climate, and 5. Incorporate appropriate comfort standards into the operational building controls (e.g. BEMS)

Lithium hydroxide dihydrate: A new type of icy material at elevated pressure

We show that, in addition to the known monohydrate, LiOH forms a dihydrate at elevated pressure. The dihydrate involves a large number of H-bonds establishing chains along the direction. In addition, the energy surface exhibits a saddle point for proton locations along certain O interatomic distances, a feature characteristic for superprotonic conductors. However, MD simulations indicate that LiOH·2H_2O is not a superprotonic conductor and suggest the relevant interpolyhedral O–O distances being too large to allow for proton transfer between neighboring Li-coordinated polyhedra at least on the time scale of the MD-simulations

Sharing the Pen: An Exploration of Interactive Writing in Early Childhood Classrooms

Although preschool aged children begin to engage in a variety of early emergent writing tasks, research shows that teachers rarely engage in writing instruction in meaningful ways at this grade level (Gerde et al. 2015; Bingham et al. 2017). This practical teaching article will explore the implementation of interactive writing in early childhood classes. These tips and examples will help teachers move instruction beyond the foundation of letter formation, and onto the elements of writing as a process of creation

A three-dimensional finite element model of maximal grip loading in the human wrist

The aim of this work was to create an anatomically accurate three-dimensional finite element model of the wrist, applying subject-specific loading and quantifying the internal load transfer through the joint during maximal grip. For three subjects, representing the anatomical variation at the wrist, loading on each digit was measured during a maximal grip strength test with simultaneous motion capture. The internal metacarpophalangeal joint load was calculated using a biomechanical model. High-resolution magnetic resonance scans were acquired to quantify bone geometry. Finite element analysis was performed, with ligaments and tendons added, to calculate the internal load distribution. It was found that for the maximal grip the thumb carried the highest load, an average of 72.2 ¡ 20.1 N in the neutral position. Results from the finite element model suggested that the highest regions of stress were located at the radial aspect of the carpus. Most of the load was transmitted through the radius, 87.5 per cent, as opposed to 12.5 per cent through the ulna with the wrist in a neutral position. A fully three-dimensional finite element analysis of the wrist using subject-specific anatomy and loading conditions was performed. The study emphasizes the importance of modelling a large ensemble of subjects in order to capture the spectrum of the load transfer through the wrist due to anatomical variation

Development of an adaptive window-opening algorithm to predict the thermal comfort, energy use and overheating in buildings

This investigation of the window opening data from extensive field surveys in UK office buildings demonstrates: 1) how people control the indoor environment by opening windows; 2) the cooling potential of opening windows; and 3) the use of an ‘adaptive algorithm’ for predicting window opening behaviour for thermal simulation in ESP-r. It was found that when the window was open the mean indoor and outdoor temperatures were higher than when closed, but show that nonetheless there was a useful cooling effect from opening a window. The adaptive algorithm for window opening behaviour was then used in thermal simulation studies for some typical office designs. The thermal simulation results were in general agreement with the findings of the field surveys. The adaptive algorithm is shown to provide insights not available using non adaptive simulation methods and can assist in achieving more comfortable, lower energy buildings while avoiding overheating

Electron-phonon coupling and phonon self-energy in MgB2_2: do we really understand MgB2_2 Raman spectra ?

We consider a model Hamiltonian fitted on the ab-initio band structure to describe the electron-phonon coupling between the electronic $\sigma-$bands and the phonon E$_{2g}$ mode in MgB$_2$. The model allows for analytical calculations and numerical treatments using very large k-point grids. We calculate the phonon self-energy of the E$_{2g}$ mode along two high symmetry directions in the Brillouin zone. We demonstrate that the contribution of the $\sigma$ bands to the Raman linewidth of the E$_{2g}$ mode via the electron-phonon coupling is zero. As a consequence the large resonance seen in Raman experiments cannot be interpreted as originated from the $E_{2g}$ mode at $\Gamma$. We examine in details the effects of Fermi surface singularities in the phonon spectrum and linewidth and we determine the magnitude of finite temperature effects in the the phonon self-energy. From our findings we suggest several possible effects which might be responsible for the MgB$_2$ Raman spectra.Comment: 10 pages, 9 figure

The thermal simulation of an office building implementing a new behavioural algorithm for window opening and the use of ceiling fans

This investigation of the window opening data from extensive field surveys in UK office buildings investigates 1) how people control the indoor environment by opening windows, 2) the cooling potential of opening windows, and 3) the use of an “adaptive algorithm” for predicting window opening behaviour for thermal simulation in ESP-r. We found that the mean indoor and outdoor temperatures when the window was open were higher than when it was closed, but show that nonetheless there was a useful cooling effect from opening a window. The adaptive algorithm for window opening behaviour was then used in thermal simulation studies for some typical office designs. The thermal simulation results were in general agreement with the findings of the field surveys

A window opening algorithm and UK office temperature field results and thermal simulation

This investigation of the window opening data from extensive field surveys in UK office buildings investigates 1) how people control the indoor environment by opening windows, 2) the cooling potential of opening windows, and 3) the use of an “adaptive algorithm” for predicting window opening behaviour for thermal simulation in ESP-r. We found that the mean indoor and outdoor temperatures when the window was open were higher than when it was closed, but show that nonetheless there was a useful cooling effect from opening a window. The adaptive algorithm for window opening behaviour was then used in thermal simulation studies for some typical office designs. The thermal simulation results were in general agreement with the findings of the field surveys

Comfort driven adaptive window opening behaviour and the influence of building design

It is important to understand and model the behaviour of occupants in buildings and how this behaviour impacts energy use and comfort. It is similarly important to understand how a buildings design affects occupant comfort, occupant behaviour and ultimately the energy used in the operation of the building. In this work a behavioural algorithm for window opening developed from field survey data has been implemented in a dynamic simulation tool. The algorithm is in alignment with the proposed CEN standard for adaptive thermal comfort. The algorithm is first compared to the field study data then used to illustrate the impact of adaptive behaviour on summer indoor temperatures and heating energy. The simulation model is also used to illustrate the sensitivity of the occupant adaptive behaviour to building design parameters such as solar shading and thermal mass and the resulting impact on energy use and comfort. The results are compared to those from other approaches to model window opening behaviour. The adaptive algorithm is shown to provide insights not available using non adaptive simulation methods and can assist in achieving more comfortable and lower energy buildings