21,862 research outputs found
A thin rivulet or ridge subject to a uniform transverse shear stress at its free surface due to an external airflow
We use the lubrication approximation to analyse three closely related problems involving a thin rivulet or ridge (i.e. a two-dimensional droplet) of fluid subject to a prescribed uniform transverse shear stress at its free surface due to an external airflow, namely a rivulet draining under gravity down a vertical substrate, a rivulet driven by a longitudinal shear stress at its free surface, and a ridge on a horizontal substrate, and find qualitatively similar behaviour for all three problems. We show that, in agreement with previous numerical studies, the free surface profile of an equilibrium rivulet/ridge with pinned contact lines is skewed as the shear stress is increased from zero, and that there is a maximum value of the shear stress beyond which no solution with prescribed semi-width is possible. In practice, one or both of the contact lines will de-pin before this maximum value of the shear stress is reached, and so we consider situations in which the rivulet/ridge de-pins at one or both contact lines. In the case of de-pinning only at the advancing contact line, the rivulet/ridge is flattened and widened as the shear stress is increased from its critical value, and there is a second maximum value of the shear stress beyond which no solution with a prescribed advancing contact angle is possible. In contrast, in the case of de-pinning only at the receding contact line, the rivulet/ridge is thickened and narrowed as the shear stress is increased from its critical value, and there is a solution with a prescribed receding contact angle for all values of the shear stress. In general, in the case of de-pinning at both contact lines there is a critical “yield” value of the shear stress beyond which no equilibrium solution is possible and the rivulet/ridge will evolve unsteadily. In an Appendix we show that an equilibrium rivulet/ridge with prescribed flux/area is quasi-statically stable to two-dimensional perturbations
A thin rivulet or ridge subject to a uniform transverse\ud shear stress at its free surface due to an external airflow
We use the lubrication approximation to analyse three closely related problems involving a thin rivulet or ridge (i.e. a two-dimensional droplet) of fluid subject to a prescribed uniform transverse shear stress at its free surface due to an external airflow, namely a rivulet draining under gravity down a vertical substrate, a rivulet driven by a longitudinal shear stress at its free surface, and a ridge on a horizontal substrate, and find qualitatively similar behaviour for all three problems. We show that, in agreement with previous numerical studies, the free surface profile of an equilibrium rivulet/ridge with pinned contact lines is skewed as the shear stress is increased from zero, and that there is a maximum value of the shear stress beyond which no solution with prescribed semi-width is possible. In practice, one or both of the contact lines will de-pin before this maximum value of the shear stress is reached, and so we consider situations in which the rivulet/ridge de-pins at one or both contact lines. In the case of de-pinning only at the advancing contact line, the rivulet/ridge is flattened and widened as the shear stress is increased from its critical value, and there is a second maximum value of the shear stress beyond which no solution with a prescribed advancing contact angle is possible. In contrast, in the case of de-pinning only at the receding contact line, the rivulet/ridge is thickened and narrowed as the shear stress is increased from its critical value, and there is a solution with a prescribed receding contact angle for all values of the shear stress. In general, in the case of de-pinning at both contact lines there is a critical “yield” value of the shear stress beyond which no equilibrium solution is possible and the rivulet/ridge will evolve unsteadily. In an Appendix we show that an equilibrium rivulet/ridge with prescribed flux/area is quasi-statically stable to two-dimensional perturbations
Why HITnet kiosks didn\u27t hit the mark for sexual health education of Western Australian Aboriginal youth
Objective: To assess the use, appropriateness of, and staff feedback on specific sexual health modules, which were installed on Heuristic Interactive Technology (HITnet) kiosks at Aboriginal Community Controlled Health Services (ACCHS). The HITnet kiosks were aimed at Aboriginal youth visiting these sites.
Methods: Modules on the HITnet kiosks were assessed for (1) cultural appropriateness using Yunkaporta’s Aboriginal pedagogy framework and (2) compliance with the World Health Organization’s (WHO) advice on key elements for comprehensive sexual health education for young people. Data measuring kiosk use were obtained through HITnet kiosk activity reports. An online survey of ACCHS staff was used to qualitatively assess use of, and staff perceptions of, HITnet kiosks.
Results: Kiosk modules were consistent with seven of the eight elements of Yunkaporta’s framework and all of the WHO recommendations. The most popular module generated 3,066 purposeful sessions and the least popular module generated 724 purposeful sessions across nine sites in 2012. While teenagers were the most frequent of the kiosk user groups (39.5% in 2012), the majority of users (56%) were not in the target group (i.e. elders 4%, adults 25%, children 27%). Key issues reported by ACCHS staff (n=11) included: lack of clarity regarding staff responsibility for overseeing kiosk functionality; kiosks attracting “inappropriate ages”; and “lack of privacy” based on kiosk location, screen visibility, and absence of headphones preventing discreet access.
Conclusions: The modules were tailored to a young Aboriginal audience through technology thought to be appealing to this group. However, barriers to use of the kiosk included kiosk design features, location, and lack of clarity around responsibility for kiosk operation.
Implications: Aboriginal youth need easy access to sexual health messages in a ‘safe’, non-judgmental space. Information and communication that is accessible via personal and mobile devices may be a better vehicle than public kiosks
Positron emission tomography PET/CT harmonisation study of different clinical PET/CT scanners using commercially available software
Objectives: Harmonisation is the process whereby
standardised uptake values from different scanners can
be made comparable. This PET/CT pilot study aimed to
evaluate the effectiveness of harmonisation of a modern
scanner with image reconstruction incorporating resolution recovery (RR) with another vendor older scanner operated in two-dimensional (2D) mode, and for both against a European standard (EARL). The vendor-proprietary software EQ•PET was used, which achieves harmonisation with a Gaussian smoothing. A substudy investigated effect of RR on harmonisation.
Methods: Phantom studies on each scanner were
performed to optimise the smoothing parameters
required to achieve successful harmonisation. 80
patients were retrospectively selected; half were imaged
on each scanner. As proof of principle, a cohort of 10
patients was selected from the modern scanner subjects
to study the effects of RR on harmonisation.
Results: Before harmonisation, the modern scanner
without RR adhered to EARL specification. Using the
phantom data, filters were derived for optimal harmonisation between scanners and with and without RR as
applicable, to the EARL standard. The 80-patient
cohort did not reveal any statistically significant differences. In the 10-patient cohort SUVmax for RR > no RR irrespective of harmonisation but differences lacked statistical significance (one-way ANOVA F(3.36) = 0.37, p = 0.78). Bland-Altman analysis showed that harmonisation reduced the SUVmax ratio between RR and no RR to 1.07 (95% CI 0.96–1.18) with no outliers.
Conclusions: EQ•PET successfully enabled harmonisation
between modern and older scanners and against
the EARL standard. Harmonisation reduces SUVmax and
dependence on the use of RR in the modern scanner.
Advances in knowledge: EQ•PET is feasible to harmonise
different PET/CT scanners and reduces the effect of
RR on SUVmax
Weak Localization Thickness Measurements of Si:P Delta-Layers
We report on our results for the characterization of Si:P delta-layers grown
by low temperature molecular beam epitaxy. Our data shows that the effective
thickness of a delta-layer can be obtained through a weak localization analysis
of electrical transport measurements performed in perpendicular and parallel
magnetic fields. An estimate of the diffusivity of phosphorous in silicon is
obtained by applying this method to several samples annealed at 850 Celsius for
intervals of zero to 15 minutes. With further refinements, this may prove to be
the most precise method of measuring delta-layer widths developed to date,
including that of Secondary Ion Mass Spectrometry analysis
Recommended from our members
A culture of silence: modes of objectification and the silencing of disabled bodies
Throughout history different practices have attempted to silence the experiences of disabled people. In this paper we explore some of these practices including the medical, familial, and self-subjugating practices English-speaking Canadian polio survivors experienced throughout their lives. We analyze participant’s experiences of silence and silencing through a Foucauldian lens, drawing on the three modes of objectification to explain the institutional and cultural discourses around polio subjects that acted upon and through the polio body to silence it. Participants’ oral history accounts demonstrate how sociocultural and medical practices effectively silenced survivors from speaking about their polio experiences. However, the trope of silence is also uprooted within oral history traditions. We will demonstrate how participants broke their silence and shifted their perspectives on polio and disability, and how this process contributed to their resistance of hegemonic conceptualizations of disability as defective
Measuring the quantum efficiency of single radiating dipoles using a scanning mirror
Using scanning probe techniques, we show the controlled manipulation of the
radiation from single dipoles. In one experiment we study the modification of
the fluorescence lifetime of a single molecular dipole in front of a movable
silver mirror. A second experiment demonstrates the changing plasmon spectrum
of a gold nanoparticle in front of a dielectric mirror. Comparison of our data
with theoretical models allows determination of the quantum efficiency of each
radiating dipole.Comment: 4 pages, 4 figure
Evaluation of positive G sub Z tolerance following simulated weightlessness (bedrest)
The magnitude of physiologic changes which are known to occur in human subjects exposed to varying levels of + G sub Z acceleration following bed rest simulation of weightlessness was studied. Bed rest effects were documented by fluid and electrolyte balance studies, maximal exercise capability, 70 deg passive tilt and lower body negative pressure tests and the ability to endure randomly prescribed acceleration profiles of +2G sub Z, +3G sub Z, and +4G sub Z. Six healthy male volunteers were studied during two weeks of bed rest after adequate control observations, followed by two weeks of recovery, followed by a second two-week period of bed rest at which time an Air Force cutaway anti-G suit was used to determine its effectiveness as a countermeasure for observed cardiovascular changes during acceleration. Results showed uniform and significant changes in all measured parameters as a consequence of bed rest including a reduced ability to tolerate +G sub Z acceleration. The use of anti-G suits significantly improved subject tolerance to all G exposures and returned measured parameters such as heart rate and blood pressure towards or to pre-bed-rest (control) values in four of the six cases
The energetics of the breakup of a sheet and of a rivulet on a vertical substrate in the presence of a uniform surface shear stress
We use the lubrication approximation to obtain a complete description of the energetics of the breakup both of a fluid sheet of uniform thickness into a periodic array of infinitely many identical thin rivulets and of a single thin rivulet into one or more identical sub-rivulets on a vertical substrate in the presence of a prescribed uniform longitudinal shear stress at the free surface of the fluid by comparing the total energies of the different states. For both problems the situation when the volume flux is positive is relatively straightforward (and, in particular, qualitatively the same as that in the case of no prescribed shear stress), but when the volume flux is negative it is more complicated. However, whatever the value of the prescribed shear stress, there is always a critical thickness below which it is energetically favourable for a sheet to break up into rivulets and a critical semi-width below which it is energetically favourable for a rivulet to remain as a single rivulet, and a critical thickness above which it is energetically favourable for a sheet to remain as a sheet and a critical semi-width above which it is energetically favourable for a rivulet to break up into sub-rivulets
- …