6,975 research outputs found
The composition of corotating energetic particle streams
The relative abundances of 1.5 to 23 MeV/nucleon ions in corotating nucleon streams were compared with ion abundances in particle events associated with solar flares and with solar and solar wind abundances. He/O and C/O ratios were found to be a factor of the order two to three times greater in corotating streams than in flare associated events. The distribution of H/He ratios in corotating streams was found to be much narrower and of lower average value than in flare associated events. H/He in corotating energetic particle streams compared favorably both in lack of variability and numerical value to H/He in high speed solar wind plasma streams. This comparison suggested that the source population for the corotating energetic particles was the solar wind
Quasi-one-dimensional Bose gases with large scattering length
Bose gases confined in highly-elongated harmonic traps are investigated over
a wide range of interaction strengths using quantum Monte Carlo techniques. We
find that the properties of a Bose gas under tight transverse confinement are
well reproduced by a 1d model Hamiltonian with contact interactions. We point
out the existence of a unitary regime, where the properties of the quasi-1d
Bose gas become independent of the actual value of the 3d scattering length. In
this unitary regime, the energy of the system is well described by a hard rod
equation of state. We investigate the stability of quasi-1d Bose gases with
positive and negative 3d scattering length.Comment: 5 pages, 3 figure
High pressure floating zone growth and structural properties of ferrimagnetic quantum paraelectric BaFeO
High quality single crystals of BaFeO were grown using the
floating zone technique in flowing oxygen pressurized to 100 atm. Single
crystal neutron diffraction was used to determine the nuclear and magnetic
structure of BaFeO at 4 K and 295 K. At both temperatures, there
exist local electric dipoles formed by the off-mirror-plane displacements of
magnetic Fe ions at the bipyramidal sites. The displacement at 4 K is
about half of that at room temperature. The temperature dependence of the
specific heat shows no anomaly associated with long range polar ordering in the
temperature range from 1.90-300 K. The inverse dielectric permittivity,
, along the c-axis shows a temperature dependence between
10 K and 20 K, with a significantly reduced temperature dependence displayed
below 10 K. Moreover, as the sample is cooled below 1.4 K there is an anomalous
sharp upturn in . These features resemble those of classic
quantum paraelectrics such as SrTiO. The presence of the upturn in
indicates that BaFeO is a critical quantum
paraelectric system with Fe ions involved in both magnetic and electric
dipole formation.Comment: 9 pages, 9 figures, submitted to APL Material
Growth and Characterization of Ce- Substituted Nd2Fe14B Single Crystals
Single crystals of (Nd1-xCex)2Fe14B are grown out of Fe-(Nd,Ce) flux.
Chemical and structural analysis of the crystals indicates that
(Nd1-xCex)2Fe14B forms a solid solution until at least x = 0.38 with a
Vegard-like variation of the lattice constants with x. Refinements of single
crystal neutron diffraction data indicate that Ce has a slight site preference
(7:3) for the 4g rare earth site over the 4f site. Magnetization measurements
show that for x = 0.38 the saturation magnetization at 400 K, a temperature
important to applications, falls from 29.8 for the parent Nd2Fe14B to 27.6
(mu)B/f.u., the anisotropy field decreases from 5.5 T to 4.7 T, and the Curie
temperature decreases from 586 to 543 K. First principles calculations carried
out within density functional theory are used to explain the decrease in
magnetic properties due to Ce substitution. Though the presence of the
lower-cost and more abundant Ce slightly affects these important magnetic
characteristics, this decrease is not large enough to affect a multitude of
applications. Ce-substituted Nd2Fe14B is therefore a potential high-performance
permanent magnet material with substantially reduced Nd content.Comment: 11 Pages, 8 figures, 5 table
Film calibration for the Skylab/ATM S-056 X-ray telescope
The sensitometry and film calibration effort for the Skylab/ATM S-056 X-ray telescope is summarized. The apparatus and procedures used are described together with the two types of flight film used, Kodak SO-212 and SO-242. The sensitometry and processing of the flight film are discussed, and the results are presented in the form of the characteristic curves and related data. The use of copy films is also discussed
Validity of the activPAL3 activity monitor in people moderately affected by Multiple Sclerosis
Background: Walking is the primary form of physical activity performed by people with Multiple Sclerosis (MS), therefore it is important to ensure the validity of tools employed to measure walking activity. The aim of this study was to assess the criterion validity of the activPAL3 activity monitor during overground walking in people with MS.\ud
Methods: Validity of the activPAL3 accelerometer was compared to video observation in 20 people moderately affected by MS. Participants walked 20-30m twice along a straight quiet corridor at a comfortable speed.\ud
Results: Inter-rater reliability of video observations was excellent (all intraclass correlations > 0.99). The mean difference (activPAL3- mean of raters) was -4.70 ± 9.09, -4.55 s ± 10.76 and 1.11 s ± 1.11 for steps taken, walking duration and upright duration respectively. These differences represented 8.7, 10.0 and 1.8% of the mean for each measure respectively. The activPAL3 tended to underestimate steps taken and walking duration in those who walked at cadences of ≤ 38 steps/minute by 60% and 47% respectively.\ud
Discussion: The activPAL3 is valid for measuring walking activity in people moderately affected by MS. It is accurate for upright duration regardless of cadence. In participants with slow walking cadences, outcomes of steps taken and walking duration should be interpreted with caution
Evidence for Strong Itinerant Spin Fluctuations in the Normal State of CeFeAsO(0.89)F(0.11) Iron-Oxypnictides
The electronic structure in the normal state of CeFeAsO0.89F0.11 oxypnictide
superconductors has been investigated with x-ray absorption and photoemission
spectroscopy. All the data exhibit signatures of Fe d-electron itinerancy.
Exchange multiplets appearing in the Fe 3s core level indicate the presence of
itinerant spin fluctuations. These findings suggest that the underlying physics
and the origin of superconductivity in these materials are likely to be quite
different from those of the cuprate high-temperature superconductors. These
materials provide opportunities for elucidating the role of magnetic
fluctuations in high-temperature superconductivity.Comment: Shorter version. Accepted in Phys. Rev. Let
Pterodactyl: Thermal Protection System for Integrated Control Design of a Mechanically Deployed Entry Vehicle
The need for precision landing of high mass payloads on Mars and the return of sensitive samples from other planetary bodies to specific locations on Earth is driving the development of an innovative NASA technology referred to as the Deployable Entry Vehicle (DEV). A DEV has the potential to deliver an equivalent science payload with a stowed diameter 3 to 4 times smaller than a traditional rigid capsule configuration. However, the DEV design does not easily lend itself to traditional methods of directional control. The NASA Space Technology Mission Directorate (STMD)s Pterodactyl project is currently investigating the effectiveness of three different Guidance and Control (G&C) systems actuated flaps, Center of Gravity (CG) or mass movement, and Reaction Control System (RCS) for use with a DEV using the Adaptable, Deployable, Entry, and Placement Technology (ADEPT) design. This paper details the Thermal Protection System (TPS) design and associated mass estimation efforts for each of the G&C systems. TPS is needed for the nose cap of the DEV and the flaps of the actuated flap control system. The development of a TPS selection, sizing, and mass estimation method designed to deal with the varying requirements for the G&C options throughout the trajectory is presented. The paper discusses the methods used to i) obtain heating environments throughout the trajectory with respect to the chosen control system and resulting geometry; ii) determine a suitable TPS material; iii) produce TPS thickness estimations; and, iv) determine the final TPS mass estimation based on TPS thickness, vehicle control system, vehicle structure, and vehicle payload
- …