In situ observation of stress relaxation in epitaxial graphene

Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene layer, i.e. stripes of partially delaminated graphene. With low energy electron microscopy (LEEM) we investigate the wrinkling phenomenon in situ. Upon temperature cycling we observe hysteresis in the appearance and disappearance of the wrinkles. Simultaneously with wrinkle formation a change in bright field imaging intensity of adjacent areas and a shift in the moire spot positions for micro diffraction of such areas takes place. The stress relieved by wrinkle formation results from the mismatch in thermal expansion coefficients of graphene and the substrate. A simple one-dimensional model taking into account the energies related to strain, delamination and bending of graphene is in qualitative agreement with our observations.Comment: Supplementary information: S1: Photo electron emission microscopy and LEEM measurements of rotational domains, STM data of a delaminated bulge around a dislocation. S2: Movie with increasing brightness upon wrinkle formation as in figure 4. v2: Major revision including new experimental dat

The association of aggressive and chronic periodontitis with systemic manifestations and dental anomalies in a jordanian population: a case control study

<p>Abstract</p> <p><b>Background</b></p> <p>The relationship between dental anomalies and periodontitis has not been documented by earlier studies. Although psychological factors have been implicated in the etiopathogenesis of periodontitis, very little information has so far been published about the association of anxiety and depression with aggressive periodontitis. The aim of this study was to investigate the association of chronic periodontitis and aggressive periodontitis with certain systemic manifestations and dental anomalies.</p> <p><b>Methods</b></p> <p>A total of 262 patients (100 chronic periodontitis, 81 aggressive periodontitis and 81 controls), attending the Periodontology clinics at Jordan University of Science and Technology, Dental Teaching Centre) were included. All subjects had a full periodontal and radiographic examination to assess the periodontal condition and to check for the presence of any of the following dental anomalies: dens invaginatus, dens evaginatus, congenitally missing lateral incisors or peg-shaped lateral incisors. Participants were interrogated regarding the following: depressive mood, fatigue, weight loss, or loss of appetite; and their anxiety and depression status was assessed using the Hospital Anxiety and Depression (HAD) scale.</p> <p><b>Results</b></p> <p>Patients with aggressive periodontitis reported more systemic symptoms (51%) than the chronic periodontitis (36%) and control (30%) patients (<it>p </it>< 0.05). Aggressive periodontitis patients had a higher tendency for both anxiety and depression than chronic periodontitis and control patients. Dental anomalies were significantly (<it>p </it>< 0.05) more frequent among both of chronic and aggressive periodontitis patients (15% and 16%, respectively), compared to controls.</p> <p><b>Conclusion</b></p> <p>In this group of Jordanians, systemic symptoms were strongly associated with aggressive periodontitis, and dental anomalies were positively associated with both aggressive and chronic periodontitis.</p

Lack of Wdr13 Gene in Mice Leads to Enhanced Pancreatic Beta Cell Proliferation, Hyperinsulinemia and Mild Obesity

WD-repeat proteins are very diverse, yet these are structurally related proteins that participate in a wide range of cellular functions. WDR13, a member of this family, is conserved from fishes to humans and localizes into the nucleus. To understand the in vivo function(s) of Wdr13 gene, we have created and characterized a mutant mouse strain lacking this gene. The mutant mice had higher serum insulin levels and increased pancreatic islet mass as a result of enhanced beta cell proliferation. While a known cell cycle inhibitor, p21, was downregulated in the mutant islets, over expression of WDR13 in the pancreatic beta cell line (MIN6) resulted in upregulation of p21, accompanied by retardation of cell proliferation. We suggest that WDR13 is a novel negative regulator of the pancreatic beta cell proliferation. Given the higher insulin levels and better glucose clearance in Wdr13 gene deficient mice, we propose that this protein may be a potential candidate drug target for ameliorating impaired glucose metabolism in diabetes

Highway infrastructure and building information modelling in UK

Traditional methods of design are becoming less relevant and prevalent, due to institutionalising of Building Information Modelling (BIM) within statutory regulations and the huge amount of data that BIM presents to practice; especially in 3D models. This can be seen in the A1 Dishforth-to-Barton road infrastructure improvement scheme which comprises the A1 Dishforth-to-Leeming and A1 Leeming-to-Barton schemes. The traditional method of design was central to the A1 Dishforth-to-Leeming scheme and BIM central to the A1 Leeming-to-Barton scheme. So this report presents a comparative study of the traditional and BIM methods in relation to the A1 Dishforth-to-Barton improvement scheme through the perception of key professionals involved in this project. A qualitative research study was conducted through the use of an open-ended questionnaire intended to bridge gaps in perceptions and understanding of both methods. Judgemental sampling technique was used to select experienced respondents who understand and participated in the A1 Dishforth-to-Barton road infrastructure improvement scheme. The study reveals an incontrovertible complementary nature of both methods and that the realisation of the 2016 mandate appears doubtful due to lack of standardization, training and level of awareness. It is highly recommended that a statutory incentivization framework for BIM be conceptualised and considered for implementation to attract and encourage small scale participants. Of high priority is the subsidization of in-house training by local authorities and localized joint ventures by smaller companies for specialist training

Review of Dental Impression Materials

Major advances in impression materials and their application have occurred during the last decade, with greater emphasis being placed on rubber impression materials than on dental compound, zinc oxide-eugenol, and agar and alginate. Of particular interest has been the effect of disinfection solutions on the qualities of impressions and the biocompatibility of impression materials. The principal advance in hydrocolloids has been the introduction of the agar/alginate impression technique, which has simplified the procedure and improved the quality of gypsum dies compared with those prepared in alginate impressions. The tear strength of some alginates has been improved, and some have been formulated so that the powder is dustless, thus reducing the health hazard as a result of patient inhalation of dust during the dispensing process. Polyether and silicone impression materials have been modified so that the working time, viscosity, and flexibility of the polyethers have been improved and, with the introduction of addition silicones, their accuracy has become exceptional. Although the early addition silicones liberated hydrogen after setting, thus delaying the pouring of models and dies, most addition silicones have been improved so that no hydrogen is released and dies can be poured immediately. The introduction of automatic mixing systems for addition silicones has simplified their manipulation, has reduced the number of voids in impressions, and has reduced the amount of material wasted. The incorporation of surfactants into addition silicones has made them hydrophilic, with wetting properties similar to those of polyethers, and has made pouring bubble-free gypsum dies easier. This review is confined to published and unpublished information of the past decade. It will also suggest trends that should be anticipated in the near future based on this information. The review will not present information developed before 1975, which is available in several textbooks on dental materials by Craig (1985a), Phillips (1982), and Williams and Cunningham (1979).Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66604/2/10.1177_08959374880020012001.pd

Encouraging female entrepreneurship in Jordan: environmental factors, obstacles and challenges

The number of female entrepreneurs and their contribution to the economy is steadily rising. Yet research suggests that female entrepreneurs face more challenges and barriers than their male counterparts. This is expected to be even more prevalent in Islamic contexts, which are characterised by conservative and patriarchal societies. In this research, 254 female business students from a private and a public university responded to a questionnaire that gauges their perceptions about potential barriers to entrepreneurship in Jordan and whether the business education they are receiving helps to prepare them for future entrepreneurial activity. Our results help to form a basis on which a deeper understanding of the phenomena can be achieved through more in depth future research. Among the main environmental factors that worry potential female entrepreneurs are the weakness of Jordanian economy, lack of finance, fear of risk, gender inequality and inability to maintain a work and private life balance. Our results also show that students are really not aware of the opportunities available to them and are unable to make a proper assessment. We call on both universities and the Jordanian government to put more emphasis on practical entrepreneurial education and encouraging women to play a much more active role within the workforce

Optimizing the Design of Oligonucleotides for Homology Directed Gene Targeting

BACKGROUND: Gene targeting depends on the ability of cells to use homologous recombination to integrate exogenous DNA into their own genome. A robust mechanistic model of homologous recombination is necessary to fully exploit gene targeting for therapeutic benefit. METHODOLOGY/PRINCIPAL FINDINGS: In this work, our recently developed numerical simulation model for homology search is employed to develop rules for the design of oligonucleotides used in gene targeting. A Metropolis Monte-Carlo algorithm is used to predict the pairing dynamics of an oligonucleotide with the target double-stranded DNA. The model calculates the base-alignment between a long, target double-stranded DNA and a probe nucleoprotein filament comprised of homologous recombination proteins (Rad51 or RecA) polymerized on a single strand DNA. In this study, we considered different sizes of oligonucleotides containing 1 or 3 base heterologies with the target; different positions on the probe were tested to investigate the effect of the mismatch position on the pairing dynamics and stability. We show that the optimal design is a compromise between the mean time to reach a perfect alignment between the two molecules and the stability of the complex. CONCLUSION AND SIGNIFICANCE: A single heterology can be placed anywhere without significantly affecting the stability of the triplex. In the case of three consecutive heterologies, our modeling recommends using long oligonucleotides (at least 35 bases) in which the heterologous sequences are positioned at an intermediate position. Oligonucleotides should not contain more than 10% consecutive heterologies to guarantee a stable pairing with the target dsDNA. Theoretical modeling cannot replace experiments, but we believe that our model can considerably accelerate optimization of oligonucleotides for gene therapy by predicting their pairing dynamics with the target dsDNA

The Impact of Entrepreneurship Education in Higher Education: A Systematic Review and Research Agenda

Using a teaching model framework, we systematically review empirical evidence on the impact of entrepreneurship education (EE) in higher education on a range of entrepreneurial outcomes, analyzing 159 published articles from 2004 to 2016. The teaching model framework allows us for the first time to start rigorously examining relationships between pedagogical methods and specific outcomes. Reconfirming past reviews and meta-analyses, we find that EE impact research still predominantly focuses on short-term and subjective outcome measures and tends to severely underdescribe the actual pedagogies being tested. Moreover, we use our review to provide an up-to-date and empirically rooted call for less obvious, yet greatly promising, new or underemphasized directions for future research on the impact of university-based entrepreneurship education. This includes, for example, the use of novel impact indicators related to emotion and mind-set, focus on the impact indicators related to the intention-to-behavior transition, and exploring the reasons for some contradictory findings in impact studies including person-, context-, and pedagogical model-specific moderator

Genetic aspects of dental disorders

The document attached has been archived with permission from the Australian Dental Association. An external link to the publisher’s copy is included.This paper reviews past and present applications of quantitative and molecular genetics to dental disorders. Examples are given relating to craniofacial development (including malocclusion), oral supporting tissues (including periodontal diseases) and dental hard tissues (including defects of enamel and dentine as well as dental caries). Future developments and applications to clinical dentistry are discussed. Early investigations confirmed genetic bases to dental caries, periodontal diseases and malocclusion, but research findings have had little impact on clinical practice. The complex multifactorial aetiologies of these conditions, together with methodological problems, have limited progress until recently. Present studies are clarifying previously unrecognized genetic and phenotypic heterogeneities and attempting to unravel the complex interactions between genes and environment by applying new statistical modelling approaches to twin and family data. linkage studies using highly polymorphic DNA markers are providing a means of locating candidate genes, including quantitative trait loci (QTL). In future, as knowledge increases: it should be possible to implement preventive strategies for those genetically-predisposed individuals who are identified-predisposed individuals who are identified to be at risk.Grant C. Townsend, Michael J. Aldred and P. Mark Bartol