14,302 research outputs found
Geothermal down well pumping system
A key technical problem in the exploitation of hot water geothermal energy resources is down-well pumping to inhibit mineral precipitation, improve thermal efficiency, and enhance flow. A novel approach to this problem involves the use of a small fraction of the thermal energy of the well water to boil and super-heat a clean feedwater flow in a down-hole exchanger adjacent to the pump. This steam powers a high-speed turbine-driven pump. The exhaust steam is brought to the surface through an exhaust pipe, condensed, and recirculated. A small fraction of the high-pressure clean feedwater is diverted to lubricate the turbine pump bearings and prevent leakage of brine into the turbine-pump unit. A project demonstrating the feasibility of this approach by means of both laboratory and down-well tests is discussed
Dusty plasma cavities: probe-induced and natural
A comprehensive exploration of regional dust evacuation in complex plasma
crystals is presented. Voids created in 3D crystals on the International Space
Station have provided a rich foundation for experiments, but cavities in dust
crystals formed in ground-based experiments have not received as much
attention. Inside a modified GEC RF cell, a powered vertical probe was used to
clear the central area of a dust crystal, producing a cavity with high
cylindrical symmetry. Cavities generated by three mechanisms are examined.
First, repulsion of micrometer-sized particles by a negatively charged probe is
investigated. A model of this effect developed for a DC plasma is modified and
applied to explain new experimental data in RF plasma. Second, the formation of
natural cavities is surveyed; a radial ion drag proposed to occur due to a
curved sheath is considered in conjunction with thermophoresis and a flattened
confinement potential above the center of the electrode. Finally, cavity
formation unexpectedly occurs upon increasing the probe potential above the
plasma floating potential. The cavities produced by these methods appear
similar, but each are shown to be facilitated by fundamentally different
processes.Comment: 10 pages, 12 figure
High power operation of an X-band gyrotwistron
We report the first experimental verification of a gyrotwistron amplifier. The device utilized a single 9.858 GHz, TE011 cavity, a heavily attenuated drift tube, and a long tapered output waveguide section. With a 440 kV, 200-245 A, 1 μs electron beam and a sharply tapered axial magnetic field, peak powers above 21 MW were achieved with a gain near 24 dB. Performance was limited by competition from a fundamental TE11 mode. A multimode code was developed to analyze this system, and simulations were in good agreement with the experiment
Measurement of net electric charge and dipole moment of dust aggregates in a complex plasma
Understanding the agglomeration of dust particles in complex plasmas requires
a knowledge of the basic properties such as the net electrostatic charge and
dipole moment of the dust. In this study, dust aggregates are formed from gold
coated mono-disperse spherical melamine-formaldehyde monomers in a
radio-frequency (rf) argon discharge plasma. The behavior of observed dust
aggregates is analyzed both by studying the particle trajectories and by
employing computer models examining 3D structures of aggregates and their
interactions and rotations as induced by torques arising from their dipole
moments. These allow the basic characteristics of the dust aggregates, such as
the electrostatic charge and dipole moment, to be determined. It is shown that
the experimental results support the predicted values from computer models for
aggregates in these environments.Comment: 6 pages, 7 figure
Heat transfer investigation of Langley Research Center transition models at a Mach number of 8, volume 2
The results are presented of a wind tunnel test program to determine aerodynamic heat transfer distributions on delta body and straight body transition models of the space shuttle. Heat transfer rates were determined by the phase-change paint technique on Stycast and RTV models using Tempilag as the surface temperature indicator. The nominal test conditions were: Mach 8, length Reynolds numbers of 5 million and 7.4 million, and angles of attack of 20, 40, and 60 deg. Model details, test conditions, and reduced heat transfer data are included. Data reduction of the phase-change paint photographs was performed by utilizing a new technique
Growth adaptation to temperature in N. crassa wild-type strains
Growth adaptation to temperature in N. crassa wild-type strain
New lesion segmentation for multiple sclerosis brain images with imaging and lesion-aware augmentation
Multiple sclerosis (MS) is an inflammatory and demyelinating neurological disease of the central nervous system. Image-based biomarkers, such as lesions defined on magnetic resonance imaging (MRI), play an important role in MS diagnosis and patient monitoring. The detection of newly formed lesions provides crucial information for assessing disease progression and treatment outcome. Here, we propose a deep learning-based pipeline for new MS lesion detection and segmentation, which is built upon the nnU-Net framework. In addition to conventional data augmentation, we employ imaging and lesion-aware data augmentation methods, axial subsampling and CarveMix, to generate diverse samples and improve segmentation performance. The proposed pipeline is evaluated on the MICCAI 2021 MS new lesion segmentation challenge (MSSEG-2) dataset. It achieves an average Dice score of 0.510 and F1 score of 0.552 on cases with new lesions, and an average false positive lesion number nFP of 0.036 and false positive lesion volume VFP of 0.192 mm3 on cases with no new lesions. Our method outperforms other participating methods in the challenge and several state-of-the-art network architectures
- …