Periodic Mesoporous Organosilica Nanorice

A periodic mesoporous organosilica (PMO) with nanorice morphology was successfully synthesized by a template assisted sol–gel method using a chain-type precursor. The PMO is composed of D and T sites in the ratio 1:2. The obtained mesoporous nanorice has a surface area of 753 m2 g−1, one-dimensional channels, and a narrow pore size distribution centered at 4.3 nm. The nanorice particles have a length of ca. 600 nm and width of ca. 200 nm

Coordinatively Saturated Tris(oxazolinyl)borato Zinc Hydride-Catalyzed Cross Dehydrocoupling of Silanes and Alcohols

The four-coordinate zinc compound ToMZnH (1, ToM = tris(4,4-dimethyl-2-oxazolinyl)phenylborate) catalyzes selective alcoholysis of substituted hydrosilanes. The catalytic reaction of PhMeSiH2 and aliphatic alcohols favors the monodehydrocoupled product PhMeHSi–OR. With the aryl alcohol 3,5-C6H3Me2OH, the selectivity for mono(aryloxy)hydrosilane PhMeHSiOC6H3Me2 and bis(aryloxy)silane PhMeSi(OC6H3Me2)2 is controlled by relative reagent concentrations. Reactions of secondary organosilanes and diols provide cyclic bis(oxo)silacycloalkanes in high yield. The empirical rate law for the ToMZnH-catalyzed reaction of 3,5-dimethylphenol and PhMeSiH2 is −d[PhMeSiH2]/dt = k′obs[ToMZnH]1[3,5-C6H3Me2OH]0[PhMeSiH2]1 (determined at 96 °C) which indicates that Si–O bond formation is turnover-limiting in the presence of excess phenol

In Situ Loading of Basic Fibroblast Growth Factor Within Porous Silica Nanoparticles for a Prolonged Release

Basic fibroblast growth factor (bFGF), a protein, plays a key role in wound healing and blood vessel regeneration. However, bFGF is easily degraded in biologic systems. Mesoporous silica nanoparticles (MSNs) with well-tailored porous structure have been used for hosting guest molecules for drug delivery. Here, we report an in situ route to load bFGF in MSNs for a prolonged release. The average diameter (d) of bFGF-loaded MSNs is 57 ± 8 nm produced by a water-in-oil microemulsion method. The in vitro releasing profile of bFGF from MSNs in phosphate buffer saline has been monitored for 20 days through a colorimetric enzyme linked immunosorbent assay. The loading efficiency of bFGF in MSNs is estimated at 72.5 ± 3%. In addition, the cytotoxicity test indicates that the MSNs are not toxic, even at a concentration of 50 μg/mL. It is expected that the in situ loading method makes the MSNs a new delivery system to deliver protein drugs, e.g. growth factors, to help blood vessel regeneration and potentiate greater angiogenesis

Bioresponsive Mesoporous Silica Nanoparticles for Triggered Drug Release

Mesoporous silica nanoparticles (MSNPs) have garnered a great deal of attention as potential carriers for therapeutic payloads. However, achieving triggered drug release from MSNPs in vivo has been challenging. Here, we describe the synthesis of stimulus-responsive polymer-coated MSNPs and the loading of therapeutics into both the core and shell domains. We characterize MSNP drug-eluting properties in vitro and demonstrate that the polymer-coated MSNPs release doxorubicin in response to proteases present at a tumor site in vivo, resulting in cellular apoptosis. These results demonstrate the utility of polymer-coated nanoparticles in specifically delivering an antitumor payload.National Science Foundation (U.S.) (grant R01-CA124427)National Science Foundation (U.S.) (grant U54-CA119349)National Science Foundation (U.S.) (grant U54-CA119335

Delivery modulation in silica mesoporous supports via alkyl chain pore outlet decoration

This article focuses on the study of the release rate in a family of modified silica mesoporous supports. A collection of solids containing ethyl, butyl, hexyl, octyl, decyl, octadecyl, docosyl, and triacontyl groups anchored on the pore outlets of mesoporous MCM-41 has been prepared and characterized. Controlled release from pore voids has been studied through the delivery of the dye complex tris(2,2¿-bipyridyl)ruthenium(II). Delivery rates were found to be dependent on the alkyl chain length anchored on the pore outlets of the mesoporous scaffolding. Moreover, release rates follow a Higuchi diffusion model, and Higuchi constants for the different hybrid solids have been calculated. A decrease of the Higuchi constants was observed as the alkyl chain used to tune the release profile is longer, confirming the effect that the different alkyl chains anchored into the pore mouths exerted on the delivery of the cargo. Furthermore, to better understand the relation between pore outlets decoration and release rate, studies using molecular dynamics simulations employing force-field methods have been carried out. A good agreement between the calculations and the experimental observations was observed.Financial support from the Spanish Government (projects MAT2009-14564-C04-01 and MAT2009-14564-C04-04) and the Generalitat Valencia (project PROMETEO/2009/016) is gratefully acknowledged.Aznar Gimeno, E.; Sancenón Galarza, F.; Marcos Martínez, MD.; Martínez Mañez, R.; Stroeve, P.; Cano, J.; Amoros Del Toro, P. (2012). Delivery modulation in silica mesoporous supports via alkyl chain pore outlet decoration. Langmuir. 28:2986-2996. https://doi.org/10.1021/la204438jS298629962

Interaction of Mesoporous Silica Nanoparticles with Human Red Blood Cell Membranes: Size and Surface Effects

The interactions of mesoporous silica nanoparticles (MSNs) of different particle sizes and surface properties with human red blood cell (RBC) membranes were investigated by membrane filtration, flow cytometry, and various microscopic techniques. Small MCM-41-type MSNs (∼100 nm) were found to adsorb to the surface of RBCs without disturbing the membrane or morphology. In contrast, adsorption of large SBA-15-type MSNs (∼600 nm) to RBCs induced a strong local membrane deformation leading to spiculation of RBCs, internalization of the particles, and eventual hemolysis. In addition, the relationship between the degree of MSN surface functionalization and the degree of its interaction with RBC, as well as the effect of RBC−MSN interaction on cellular deformability, were investigated. The results presented here provide a better understanding of the mechanisms of RBC−MSN interaction and the hemolytic activity of MSNs and will assist in the rational design of hemocompatible MSNs for intravenous drug delivery and in vivo imaging

Silica Materials for Medical Applications

The two main applications of silica-based materials in medicine and biotechnology, i.e. for bone-repairing devices and for drug delivery systems, are presented and discussed. The influence of the structure and chemical composition in the final characteristics and properties of every silica-based material is also shown as a function of the both applications presented. The adequate combination of the synthesis techniques, template systems and additives leads to the development of materials that merge the bioactive behavior with the drug carrier ability. These systems could be excellent candidates as materials for the development of devices for tissue engineering

Mesoporous silica nanoparticles with tunable pore size for tailored gold nanoparticles

The aim of this paper was to verify a possible correlation between the pore-size of meso- porous silica nanoparticles (MSNs) and the sizes of gold nanoparticles (AuNPs) obtained by an impreg- nation of gold(III) chloride hydrate solution in the MSNs, followed by a specific thermal treatment. Mesoporous silica nanoparticles with tunable pore diameter were synthesized via a surfactant-assisted method. Tetraethoxysilane as silica precursor, cetyl- trimethylammonium bromide (CTAB) as surfactant and toluene as swelling agent were used. By varying the CTAB–toluene molar ratio, the average dimension of the pores could be tuned from 2.8 to 5.5 nm. Successively, thiol groups were grafted on the surface of the MSNs. Finally, the thermal evolution of the gold salt, followed by ‘‘in situ’’ X-ray powder diffraction (XRPD) and thermogravimetric analysis (TGA), revealed an evident correlation among the degradation of the thiol groups, the pore dimension of the MSNs and the size of the AuNPs. The samples were characterized by means of nitrogen adsorption– desorption, transmission electron microscopy, small- angle X-ray scattering, XRPD ‘‘in situ’’ by synchro- tron radiation, and ‘‘ex situ’’ by conventional tech- niques, diffuse reflectance infrared Fourier transform spectroscopy, and TGA