Elastic suspension of a wind tunnel test section

Experimental verification of the theory describing arbitrary motions of an airfoil is reported. The experimental apparatus is described. A mechanism was designed to provide two separate degrees of freedom without friction or backlash to mask the small but important aerodynamic effects of interest

Caging Mechanism for a drag-free satellite position sensor

A disturbance compensation system for satellites based on the drag-free concept was mechanized and flown, using a spherical proof mass and a cam-guided caging mechanism. The caging mechanism controls the location of the proof mass for testing and constrains it during launch. Design requirements, design details, and hardware are described

A 10 GHz Quasi-Optical Grid Amplifier Using Integrated HBT Differential Pairs

We report the fabrication and testing of a 10 GHz grid amplifier utilizing sixteen GaAs chips each containing an HBT differential pair plus integral bias/feedback resistors. The overall amplifier consists of a 4x4 array of unit cells on an RT Duroid™ board having a relative permittivity of 2.2. Each unit cell consists of an emitter-coupled differential pair at the center, an input antenna which extends horizontally in both directions from the two base leads, an output antenna which extends vertically in both directions from the two collector leads, and high inductance bias lines. In operation, the active grid array is placed between a pair of crossed polarizers. The horizontally polarized input wave passes through the input polarizer and couples to the input leads. An amplified current then flows on the vertical leads, which radiate a vertically polarized amplified signal through the output polarizer. The polarizers serve dual functions, providing both input-output isolation as well as independent impedance matching for the input and output ports. The grid thus functions essentially as a free-space beam amplifier. Calculations indicate that output powers of several watts per square centimeter of grid area should be attainable with optimized structures

Subduction-zone structure and magmatic processes beneath Costa Rica constrained by local earthquake tomography and petrological modelling

A high-quality data set of 3790 earthquakes were simultaneously inverted for hypocentre locations and 3-D P-wave velocities in Costa Rica. Tests with synthetic data and resolution estimates derived from the resolution matrix indicate that the velocity model is well constrained in central Costa Rica to a depth of 70 km; northwestern and southeastern Costa Rica are less well resolved owing to a lack of seismic stations and seismicity. Maximum H2O content and seismic wave speeds of mid-ocean ridge basalt and harzburgite were calculated for metamorphic phase transformations relevant to subduction. Both the 3-D P-wave velocity structure and petrological modelling indicate the existence of low-velocity hydrous oceanic crust in the subducting Cocos Plate beneath central Costa Rica. Intermediate-depth seismicity correlates well with the predicted locations of hydrous metamorphic rocks, suggesting that dehydration plays a key role in generating intermediate-depth earthquakes beneath Costa Rica. Wadati-Benioff zone seismicity beneath central Costa Rica shows a remarkable decrease in maximum depth toward southeastern Costa Rica. The presence of asthenosphere beneath southeastern Costa Rica, which entered through a proposed slab window, may explain the shallowing of seismicity due to increased temperatures and associated shallowing of dehydration of the slab. Tomographic images further constrain the existence of deeply subducted seamounts beneath central Costa Rica. Large, low P-wave velocity areas within the lower crust are imaged beneath the southeasternmost volcanoes in central Costa Rica. These low velocities may represent anomalously hot material or even melt associated with active volcanism in central Costa Rica. Tomographic images and petrological modelling indicate the existence of a shallow, possibly hydrated mantle wedge beneath central Costa Ric

A 100-element HBT grid amplifier

A 100-element 10-GHz grid amplifier has been developed. The active devices in the grid are chips with heterojunction-bipolar-transistor (HBT) differential pairs. The metal grid pattern was empirically designed to provide effective coupling between the HBTs and free space. Two independent measurements, one with focusing lenses and the other without, were used to characterize the grid. In each case, the peak gain was 10 dB at 10 GHz with a 3-dB bandwidth of 1 GHz. The input and output return losses were better than 15 dB at 10 GHz. The maximum output power was 450 mW, and the minimum noise figure was 7 dB. By varying the bias, a signal could be amplitude modulated with a modulation index as large as 0.65. Tests show that the grid was quite tolerant of failures-the output power dropped by only 1 dB when 10% of the inputs were detuned. The grid amplifier is a multimode device that amplifies beams of different shapes and angles. Beams with incidence angles up to 30° were amplified with less than a 3-dB drop in gain

Association of a genetic polymorphism (-44 C/G SNP) in the human DEFB1 gene with expression and inducibility of multiple β-defensins in gingival keratinocytes

BACKGROUND: Human β-defensins (hBDs) are antimicrobial peptides with a role in innate immune defense. Our laboratory previously showed that a single nucleotide polymorphism (SNP) in the 5' untranslated region of the hBD1 gene (DEFB1), denoted -44 (rs1800972), is correlated with protection from oral Candida. Because this SNP alters the putative mRNA structure, we hypothesized that it alters hBD1 expression. METHODS: Transfection of reporter constructs and evaluation of antimicrobial activity and mRNA expression levels in keratinocytes from multiple donors were used to evaluate the effect of this SNP on constitutive and induced levels of expression. RESULTS: Transfection of CAT reporter constructs containing the 5' untranslated region showed that the -44 G allele yielded a 2-fold increase in CAT protein compared to other common haplotypes suggesting a cis effect on transcription or translation. The constitutive hBD1 mRNA level in human oral keratinocytes was significantly greater in cells from donors with the -44 GG genotype compared to those with the common CC genotype. Surprisingly, the hBD3 mRNA level as well as antimicrobial activity of keratinocyte extracts also correlated with the -44 G allele. Induced levels of hBD1, hBD2, and hBD3 mRNA were evaluated in keratinocytes challenged with Toll-like receptor 2 and 4 ligands, interleukin-1β, TNFα, and interferon-γ (IFNγ). In contrast to constitutive expression levels, IFNγ-induced keratinocyte hBD1 and hBD3 mRNA expression was significantly greater in cells with the common CC genotype, but there was no clear correlation of genotype with hBD2 expression. CONCLUSION: The DEFB1 -44 G allele is associated with an increase in overall constitutive antimicrobial activity and expression of hBD1 and hBD3 in a manner that is consistent with protection from candidiasis, while the more common C allele is associated with IFNγ inducibility of these β-defensins and is likely to be more protective in conditions that enhance IFNγ expression such as chronic periodontitis. These results suggest a complex relationship between genetics and defensin expression that may influence periodontal health and innate immune responses

Observations of sulfur dioxide uptake and new particle formation in a midlatitude cumulus cloud

International audienceAirborne measurements, obtained during the Asian Aerosol Characterisation Experiment (ACE-Asia), of SO2 and condensation nuclei (CN) concentrations were made in the local environment of a cumulus cloud band. Conserved quantities, wet equivalent potential temperature ?q, and total water content Q, were used to identify the sources of air detrained on the downwind side of the cumulus band. It was found that ~65% of the detrained air originated from below cloud base and the remainder was air that had been entrained from the free troposphere upwind of the cloud and subsequently been detrained. Calculation of the sources of the detrained air parcels enabled a prediction of the concentration of SO2 and CN, assuming that SO2 and CN experienced no processing within cloud. A comparison of the predicted concentration of SO2 and CN was made with those observed. The concentration of SO2 observed was less than predicted and the amount of SO2 scavenged within cloud was calculated. The CN concentration observed was also less than predicted and, moreover, inclusion of the loss of CN to cloud droplets due to Brownian scavenging resulted in an enhanced decrease of the number concentration of CN predicted. Clear air regions around the cloud exhibited no indication of being a major source of new particles. It was concluded that new particles were formed within cloud

Robot rights? Towards a social-relational justification of moral consideration \ud

Should we grant rights to artificially intelligent robots? Most current and near-future robots do not meet the hard criteria set by deontological and utilitarian theory. Virtue ethics can avoid this problem with its indirect approach. However, both direct and indirect arguments for moral consideration rest on ontological features of entities, an approach which incurs several problems. In response to these difficulties, this paper taps into a different conceptual resource in order to be able to grant some degree of moral consideration to some intelligent social robots: it sketches a novel argument for moral consideration based on social relations. It is shown that to further develop this argument we need to revise our existing ontological and social-political frameworks. It is suggested that we need a social ecology, which may be developed by engaging with Western ecology and Eastern worldviews. Although this relational turn raises many difficult issues and requires more work, this paper provides a rough outline of an alternative approach to moral consideration that can assist us in shaping our relations to intelligent robots and, by extension, to all artificial and biological entities that appear to us as more than instruments for our human purpose

The problems and prospects of the Kimberley pastoral industry

The pastoral industry in the Kimberley region began in the early 1880s withthe introduction of cattle overlanded from Queensland and New South Wales into the East Kimberley and with the almost simultaneous introduction, by sea, ofboth sheep and cattle into the Fitzroy Valley.Occupation of the more accessible areas was gradually achieved by theprogressive extension of these two arms of settlement which ultimately metaround the present location of Fitzroy Crossing. Extensive development of themore rugged areas of the North Kimberley came later with the construction ofreasonable access roads to the few isolated stations which had been initiallyestablished in this area

Some concepts in rangeland management

The arid and semi-arid zones of Australia occupy about 75 per cent of the land mass. The pastoral industries are located within these zones and, although productivity per unit area is low, the region nevertheless constitutes one of the nation\u27s valuable renewable resources. If properly managed, such a resource may be maintained as a productive asset indefinitely