Effect of Testing Rate on Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend-Based Pressure-Sensitive Adhesive

The dependence of loop tack, peel strength, and shear strength of NBR/SMR L blend-based pressure-sensitive adhesives on the rate of testing was investigated using coumarone-indene resin and toluene as the tackifier and solvent, respectively. A 40% NBR content in the NBR/SMR L blend was used throughout the experiment.The adhesion properties weremeasured by a Lloyd Adhesion Tester operating at different rates of testing. The result indicates that loop tack, peels strength, and shear strength increase with the rate of testing due to the viscoelastic response of the adhesive. At low testing rate, the failure mode is cohesive in nature whereas adhesion failure mode occurs at higher testing rates. Adhesion properties also increase with the increase in adhesive coating thickness, an observation which is attributed to the wettability of the adhesive and viscoelastic behavior of the rubber blend

Dependence of Adhesion Property of Epoxidized Natural Rubber (ENR 25)/Ethylene-Propylene-Diene Rubber Blend Adhesives Crosslinked by Benzoyl Peroxide

The loop tack, peel strength, and shear strength of crosslinked epoxidized natural rubber (ENR 25)/ethylene-propylene-diene rubber (EPDM) blend adhesives were investigated. Coumarone-indene resin, toluene, and benzoyl peroxide were used as the tackifier, solvent, and crosslinking agent, respectively, throughout the experiment. The adhesive was coated on a polyethylene terephthalate (PET) substrate using a SHEEN hand coater at 6

Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend Based Pressure-Sensitive Adhesive

Viscosity and adhesion properties of NBR/SMR L blend based pressure-sensitive adhesive were investigated using coumaroneindene resin, toluene, and poly(ethylene terephthalate) (PET) as tackifier, solvent, and coating substrate, respectively. Coumaroneindene resin content was fixed at 40 parts per hundred parts of rubber (phr) in the adhesive formulation.The ratio of NBR/SMR L blend used was 0, 20, 40, 60, 80, and 100% of NBR content. Four different thicknesses, that is, 30, 60, 90, and 12

Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene Rubber/Standard Malaysian Rubber Blend Adhesive

Viscosity, tack and, peel and shear strengths of ethylene-propylene-diene rubber (EPDM)/standard Malaysian rubber (SMR L) blend adhesive were studied using various blend ratios of the two rubbers, ranging from 0 to 100% EPDM. Coumarone-indene resin, toluene, and poly(ethylene terephthalate) (PET) were used as the tackifier, solvent, and coating substrate, respectively. The tackifier content was fixed at 40 parts per hundred parts of rubber (phr). A SHEEN hand coater was used to coat the adhesive on PET film at four coating thicknesses, that is, 30, 60, 90, and 12

Perilaku Konsumsi Dan Faktor-faktor Yang Mempengaruhi Masyarakat Surabaya Dalam Mengkonsumsi Produk-produk Pastry Dan Bakery

Penelitian ini dilakukan untuk mengetahui perilaku konsumsi dan faktor-faktor apa saja yang mempengaruhi masyarakat Surabaya dalam mengkonsumsi produk-produk pastry dan bakery, dan melihat apakah ada perbedaan perilaku konsumsi masyarakat Surabaya terhadap produk-produk pastry dan bakery dilihat dari segi demografis (perbedaan jenis kelamin, usia, tingkat pendidikan, pekerjaan, serta pendapatan).Teknik analisis yang digunakan dalam penelitian ini adalah metode analisis faktor, Mann-Withney U-Test dan One Way ANOVA. Hasil penelitian menunjukkan bahwa terdapat lima faktor yang terbentuk, yaitu faktor subtitusi produk sumber karbohidrat, gaya hidup, kelompok referensi, persepsi, dan sikap. Selain itu, hasil penelitian juga menunjukkan bahwa terdapat perbedaan perilaku masyarakat Surabaya dalam mengkonsumsi produk-produk pastry dan bakery dilihat dari segi jenis kelamin, usia, pendidikan, dan pekerjaan, namun tidak terdapat perbedaan perilaku dari segi pendapatan

The implausibility of ‘usual care’ in an open system: sedation and weaning practices in Paediatric Intensive Care Units (PICUs) in the United Kingdom (UK)

Background: The power of the randomised controlled trial depends upon its capacity to operate in a closed system whereby the intervention is the only causal force acting upon the experimental group and absent in the control group, permitting a valid assessment of intervention efficacy. Conversely, clinical arenas are open systems where factors relating to context, resources, interpretation and actions of individuals will affect implementation and effectiveness of interventions. Consequently, the comparator (usual care) can be difficult to define and variable in multi-centre trials. Hence outcomes cannot be understood without considering usual care and factors that may affect implementation and impact on the intervention. Methods: Using a fieldwork approach, we describe PICU context, ‘usual’ practice in sedation and weaning from mechanical ventilation, and factors affecting implementation prior to designing a trial involving a sedation and ventilation weaning intervention. We collected data from 23 UK PICUs between June and November 2014 using observation, individual and multi-disciplinary group interviews with staff. Results: Pain and sedation practices were broadly similar in terms of drug usage and assessment tools. Sedation protocols linking assessment to appropriate titration of sedatives and sedation holds were rarely used (9 % and 4 % of PICUs respectively). Ventilator weaning was primarily a medical-led process with 39 % of PICUs engaging senior nurses in the process: weaning protocols were rarely used (9 % of PICUs). Weaning methods were variably based on clinician preference. No formal criteria or use of spontaneous breathing trials were used to test weaning readiness. Seventeen PICUs (74 %) had prior engagement in multi-centre trials, but limited research nurse availability. Barriers to previous trial implementation were intervention complexity, lack of belief in the evidence and inadequate training. Facilitating factors were senior staff buy-in and dedicated research nurse provision. Conclusions: We examined and identified contextual and organisational factors that may impact on the implementation of our intervention. We found usual practice relating to sedation, analgesia and ventilator weaning broadly similar, yet distinctively different from our proposed intervention, providing assurance in our ability to evaluate intervention effects. The data will enable us to develop an implementation plan; considering these factors we can more fully understand their impact on study outcomes

An EnergyPlus whole building energy model calibration method for office buildings using occupant behavior data mining and empirical data

This paper proposes a method comprising procedures to calibrate an EnergyPlus whole building energy model. An occupant behavior data mining procedure is developed and tested in an office building. Workday occupancy schedules are generated by mining the office appliance energy consumption data. Hourly and monthly power, energy, and temperature data are collected and used for lighting, equipment and HVAC systems energy performance calibration. The result shows a 1.27% mean bias error for the total annual energy use intensity. The proposed calibration method provides a scientific and systematic framework to conduct high accuracy EnergyPlus model calibration

Sunscreens - Which and what for?

It is well established that sun exposure is the main cause for the development of skin cancer. Chronic continuous UV radiation is believed to induce malignant melanoma, whereas intermittent high-dose UV exposure contributes to the occurrence of actinic keratosis as precursor lesions of squamous cell carcinoma as well as basal cell carcinoma. Not only photocarcinogenesis but also the mechanisms of photoaging have recently become apparent. In this respect the use of sunscreens seemed to prove to be more and more important and popular within the last decades. However, there is still inconsistency about the usefulness of sunscreens. Several studies show that inadequate use and incomplete UV spectrum efficacy may compromise protection more than previously expected. The sunscreen market is crowded by numerous products. Inorganic sunscreens such as zinc oxide and titanium oxide have a wide spectral range of activity compared to most of the organic sunscreen products. It is not uncommon for organic sunscreens to cause photocontact allergy, but their cosmetic acceptability is still superior to the one given by inorganic sunscreens. Recently, modern galenic approaches such as micronization and encapsulation allow the development of high-quality inorganic sunscreens. The potential systemic toxicity of organic sunscreens has lately primarily been discussed controversially in public, and several studies show contradictory results. Although a matter of debate, at present the sun protection factor (SPF) is the most reliable information for the consumer as a measure of sunscreen filter efficacy. In this context additional tests have been introduced for the evaluation of not only the protective effect against erythema but also protection against UV-induced immunological and mutational effects. Recently, combinations of UV filters with agents active in DNA repair have been introduced in order to improve photoprotection. This article reviews the efficacy of sunscreens in the prevention of epithelial and nonepithelial skin cancer, the effect on immunosuppression and the value of the SPF as well as new developments on the sunscreen market. Copyright (C) 2005 S. Karger AG, Basel

The challenge of measuring physical activity

Measuring physical activity accurately and reliably is essential when physical activity is either an intervention or an outcome measure. Measurement of physical activity in population groups has been undertaken in a number of ways, including self-report, observation, heart rate measurement and activity monitors. The strengths and weaknesses of each of these methods will be reviewed. The measurement of physical activity in children is an additional challenge and data from the recently completed pilot study of the Kajian Aktiviti Fizikal dan Sukan Pelajar Sekolah Malaysia 2008 (KAFS08) will be used to illustrate these complexities. Questionnaire and activity monitoring data were collected from 163 children attending four schools in Kuala Lumpur with an age range of 9-18 years. Three models of activity monitors were used (YAMAX SW-700, OMRON HJ113, ACTIGRAPH GT1M) and on completion of data collection, significant differences were found between pedometer steps recorded on each monitor, after allowing for age and gender differences. A subsequent study on the differences between the three monitors was undertaken involving over 15 individuals and over 40 days of measurement where one individual wore each of the three monitors for a full day. In addition, the accuracy of each monitor was determined by comparing the step count registered by the monitor with actual number of steps counted

Stressful first impressions in job interviews

Stress can impact many aspects of our lives, such as the way we interact and work with others, or the first impressions that we make. In the past, stress has been most commonly assessed through self-reported questionnaires; however, advancements in wearable technology have enabled the measurement of physiological symptoms of stress in an unobtrusive manner. Using a dataset of job interviews, we investigate whether first impressions of stress (from annotations) are equivalent to physiological measurements of the electrodermal activity (EDA). We examine the use of automatically extracted nonverbal cues stemming from both the visual and audio modalities, as well EDA stress measurements for the inference of stress impressions obtained from manual annotations. Stress impressions were found to be significantly negatively correlated with hireability ratings i.e individuals who were perceived to be more stressed were more likely to obtained lower hireability scores. The analysis revealed a significant relationship between audio and visual features but low predictability and no significant effects were found for the EDA features. While some nonverbal cues were more clearly related to stress, the physiological cues were less reliable and warrant further investigation into the use of wearable sensors for stress detection