A New Model for Void Coalescence by Internal Necking

A micromechanical model for predicting the strain increment required to bring a damaged material element from the onset of void coalescence up to final fracture is developed based on simple kinematics arguments. This strain increment controls the unloading slope and the energy dissipated during the final step of material failure. Proper prediction of the final drop of the load carrying capacity is an important ingredient of any ductile fracture model, especially at high stress triaxiality. The model has been motivated and verified by comparison to a large set of finite element void cell calculations.

Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties

International audienceCompared to most thermomechanical processing methods, friction stir welding (FSW) is a recent technique which has not yet reached full maturity. Nevertheless, owing to multiple intrinsic advantages, FSW has already replaced conventional welding methods in a variety of industrial applications especially for Al alloys. This provides the impetus for developing a methodology towards optimization, from process to performances, using the most advanced approach available in materials science and thermomechanics. The aim is to obtain a guidance both for process fine tuning and for alloy design. Integrated modeling constitutes a way to accelerate the insertion of the process, especially regarding difficult applications where for instance ductility, fracture toughness, fatigue and/or stress corrosion cracking are key issues. Hence, an integrated modeling framework devoted to the FSW of 6xxx series Al alloys has been established and applied to the 6005A and 6056 alloys. The suite of models involves an in-process temperature evolution model, a microstructure evolution model with an extension to heterogeneous precipitation, a microstructure based strength and strain hardening model, and a micro-mechanics based damage model. The presentation of each model is supplemented by the coverage of relevant recent literature. The "model chain" is assessed towards a wide range of experimental data. The final objective is to present routes for the optimization of the FSW process using both experiments and models. Now, this strategy goes well beyond the case of FSW, illustrating the potential of chain models to support a "material by design approach" from process to performances

Modelling of Short-Term Interactions Between Concrete Support and the Excavated Damage Zone Around Galleries Drilled in Callovo–Oxfordian Claystone

peer reviewedProduction of energy from nuclear power plants generates high-level radioactive nuclear waste, harmful during dozens of thousand years. Deep geological disposal of nuclear waste represents the most reliable solutions for its safe isolation. Confinement of radioactive wastes relies on the multi-barrier concept in which isolation is provided by a series of engineered (canister, backfill) and natural (host rock) barriers. Few underground research laboratories have been built all over the world to test and validate storage solutions. The underground drilling process of disposal drifts may generate cracks, fractures/strain localisation in shear bands within the rock surrounding the gallery especially in argillaceous rocks. These degradations affect the hydro-mechanical properties of the material, such as permeability, e.g. creating a preferential flow path for radionuclide migration. Hydraulic conductivity increase within this zone must remain limited to preserve the natural barrier. In addition galleries are currently reinforced by different types of concrete supports such as shotcrete and/or prefab elements. Their purpose is twofold: avoiding partial collapse of the tunnel during drilling operations and limiting convergence of the surrounding rock. Properties of both concrete and rock mass are time dependent, due to shotcrete hydration and hydromechanical couplings within the host rock. By the use of a hydro-mechanical coupled Finite Element Code with a Second Gradient regularization, this paper aims at investigating and predicting support and rock interactions (convergence, stress field). The effect of shotcrete hydration evolution, spraying time and use of compressible wedges is studied in order to determine their relative influence

Higher education in Indonesia: Contemporary challenges in governance, access, and quality

This chapter presents the development of Indonesian higher education since its origins to current challenges in the fields of governance, autonomy, access, equity, quality, and internationalization. Indonesia has a massive and diversified tertiary education, including experiments in community colleges and online programs. The higher educational system remains mainly centralized, with the exception of some reforms towards financial autonomy. Insufficient public funding hinders the capacity to provide adequate teaching, research, and facilities among other aspects. The consequential rise in student fees contributes to an overrepresentation of students from Java, urban centers, and higher social classes

Numerical Simulations of Void Linkage in Model Materials using a Nonlocal Ductile Damage Approximation

Experiments on the growth and linkage of 10 μm diameter holes laser drilled in high precision patterns into Al-plates were modelled with finite elements. The simulations used geometries identical to those of the experiments and incorporated ductile damage by element removal under the control of a ductile damage indicator based on the micromechanical studies of Rice and Tracey. A regularization of the problem was achieved through an integral-type nonlocal model based on the smoothing of the rate of a damage indicator D over a characteristic length L. The simulation does not predict the experimentally observed damage acceleration either in the case where no damage is included or when only a local damage model is used. However, the full three-dimensional simulations based on the nonlocal damage methodology do predict both the failure path and the failure strain at void linkage for almost all configurations studied. For the cases considered the critical parameter controlling the local deformations at void linkage was found to be the ratio between hole diameter and hole spacing

Perfusion-decellularization of human ear grafts enables ECM-based scaffolds for auricular vascularized composite tissue engineering

Introduction: Human ear reconstruction is recognized as the emblematic enterprise in tissue engineering. Up to now, it has failed to reach human applications requiring appropriate tissue complexity along with an accessible vascular tree. We hereby propose a new method to process human auricles in order to provide a poorly immunogenic, complex and vascularized ear graft scaffold. Methods: 12 human ears with their vascular pedicles were procured. Perfusion-decellularization was applied using a SDS/polar solvent protocol. Cell and antigen removal was examined by histology and DNA was quantified. Preservation of the extracellular matrix (ECM) was assessed by conventional and 3D-histology, proteins and cytokines quantifications. Biocompatibility was assessed by implantation in rats for up to 60 days. Adipose-derived stem cells seeding was conducted on scaffold samples and with human aortic endothelial cells whole graft seeding in a perfusion-bioreactor. Results: Histology confirmed cell and antigen clearance. DNA reduction was 97.3%. ECM structure and composition were preserved. Implanted scaffolds were tolerated in vivo, with acceptable inflammation, remodeling, and anti-donor antibody formation. Seeding experiments demonstrated cell engraftment and viability. Conclusions: Vascularized and complex auricular scaffolds can be obtained from human source to provide a platform for further functional auricular tissue engineered constructs, hence providing an ideal road to the vascularized composite tissue engineering approach

Effect of rotational material flow on temperature distribution in friction stir welds

A finite element pseudosteady state thermal model takes the mechanical power as input data while distributing the total power input between surface and volume heat sources. A simple model for the material flow around the tool has been developed in order to take heat convection into account based on the shape of the thermomechanically affected zone. The model is assessed for a large number of different welding parameters. Special attention is given to the type of contact at the tool/workpiece interface, i.e. sliding, sticking or both and at the workpiece backing plate interface. The rotational material flow creates asymmetry in the temperature distribution between the two sides of the weld