Metamaterial metal-based bolometers

We demonstrate metamaterial metal-based bolometers, which take advantage of resonant absorption in that a spectral and/or polarization filter can be built into the bolometer. Our proof-of-principle gold-nanostructure-based devices operate around 1.5 \mum wavelength and exhibit room-temperature time constants of about 134 \mus. The ultimate detectivity is limited by Johnson noise, enabling room-temperature detection of 1 nW light levels within 1 Hz bandwidth. Graded bolometer arrays might allow for integrated spectrometers with several octaves bandwidth without the need for gratings or prisms and for integrated polarization analysis without external polarization optics

Application of fine-grained coke breeze fractions in the process of iron ore sintering

The testing cycle, described in the paper, included fine-grained coke breeze granulation tests and iron concentrate sintering tests with the use of selected granulate samples. The use of granulated coke breeze in the sintering process results in a higher process efficiency, shorter sintering duration and fuel saving

Diffractive Phenomena and Shadowing in Deep-Inelastic Scattering

Shadowing effects in deep-inelastic lepton-nucleus scattering probe the mass spectrum of diffractive leptoproduction from individual nucleons. We explore this relationship using current experimental information on both processes. In recent data from the NMC and E665 collaboration, taken at small x << 0.1 and Q^2 < 1 GeV^2, shadowing is dominated by the diffractive excitation and coherent interaction of low mass vector mesons. If shadowing is explored at small x > 1 GeV^2 as discussed at HERA, the situation is different. Here dominant contributions come from the coherent interaction of diffractively produced heavy mass states. Furthermore we observe that the energy dependence of shadowing is directly related to the mass dependence of the diffractive production cross section for free nucleon targets.Comment: 12 pages Latex, 8 figure

Application of fine-grained coke breeze fractions in the process of iron ore sintering

The testing cycle, described in the paper, included fine-grained coke breeze granulation tests and iron concentrate sintering tests with the use of selected granulate samples. The use of granulated coke breeze in the sintering process results in a higher process efficiency, shorter sintering duration and fuel saving

Replication of functional serotonin receptor type 3A and B variants in bipolar affective disorder: a European multicenter study

Serotonin type 3 receptors (5-HT3) are involved in learning, cognition and emotion, and have been implicated in various psychiatric phenotypes. However, their contribution to the pathomechanism of these disorders remains elusive. Three single nucleotide polymorphisms (SNPs) in the HTR3A and HTR3B genes (rs1062613, rs1176744 and rs3831455) have been associated with bipolar affective disorder (BPAD) in pilot studies, and all of them are of functional relevance. We performed a European multicenter study to confirm previous results and provide further evidence for the relevance of these SNPs to the etiology of neuropsychiatric disorders. This involved analysis of the distribution of the three SNPs among 1804 BPAD cases and 2407 healthy controls. A meta-analysis revealed a pooled odds ratio of 0.881 (P=0.009, 95% confidence intervals=0.802–0.968) for the non-synonymous functional SNP HTR3B p.Y129S (rs1176744), thereby confirming previous findings. In line with this, the three genome-wide association study samples BOMA (Bonn-Mannheim)-BPAD, WTCCC (Wellcome Trust Case Control Consortium)-BPAD and GAIN (Genetic Association Information Network)-BPAD, including >3500 patients and 5200 controls in total, showed an overrepresentation of the p.Y129 in patients. Remarkably, the meta-analysis revealed a P-value of 0.048 (OR=0.934, fixed effect model). We also performed expression analyses to gain further insights into the distribution of HTR3A and HTR3B mRNA in the human brain. HTR3A and HTR3B were detected in all investigated brain tissues with the exception of the cerebellum, and large differences in the A:B subunit ratio were observed. Interestingly, expression of the B subunit was most prominent in the brain stem, amygdalae and frontal cortex, regions of relevance to psychiatric disorders. In conclusion, the present study provides further evidence for the presence of impaired 5-HT3 receptor function in BPAD

Partonic structure of pi and rho mesons from data on hard (semi)exclusive production of two pions off nucleon

We fitted the pi-pi mass distribution in the range 0.5 < mpipi < 1.1 GeV measured in hard exclusive positron-proton reactions at HERA by the form dictated by QCD at leading twist level. Extracted parameters are related to valence quark distribution in the pion, and to the pion and rho meson distribution amplitudes. We obtain, for the first time, a measurement of the second Gegenbauer coefficient of the rho meson distribution amplitude: $a_2^{(\rho)}= -0.10\pm 0.20$ for a photon virtuality of =21.2 GeV^2.Comment: 12 pages, two figures. References and discussion are adde

Three-dimensional-printed gas dynamic virtual nozzles for x-ray laser sample delivery

Reliable sample delivery is essential to biological imaging using X-ray Free Electron Lasers (XFELs). Continuous injection using the Gas Dynamic Virtual Nozzle (GDVN) has proven valuable, particularly for time-resolved studies. However, many important aspects of GDVN functionality have yet to be thoroughly understood and/or refined due to fabrication limitations. We report the application of 2-photon polymerization as a form of high-resolution 3D printing to fabricate high-fidelity GDVNs with submicron resolution. This technique allows rapid prototyping of a wide range of different types of nozzles from standard CAD drawings and optimization of crucial dimensions for optimal performance. Three nozzles were tested with pure water to determine general nozzle performance and reproducibility, with nearly reproducible off-axis jetting being the result. X-ray tomography and index matching were successfully used to evaluate the interior nozzle structures and identify the cause of off-axis jetting. Subsequent refinements to fabrication resulted in straight jetting. A performance test of printed nozzles at an XFEL provided high quality femtosecond diffraction patterns. (C) 2016 Optical Society of Americ

Past Achievements and Future Challenges in 3D Photonic Metamaterials

Photonic metamaterials are man-made structures composed of tailored micro- or nanostructured metallo-dielectric sub-wavelength building blocks that are densely packed into an effective material. This deceptively simple, yet powerful, truly revolutionary concept allows for achieving novel, unusual, and sometimes even unheard-of optical properties, such as magnetism at optical frequencies, negative refractive indices, large positive refractive indices, zero reflection via impedance matching, perfect absorption, giant circular dichroism, or enhanced nonlinear optical properties. Possible applications of metamaterials comprise ultrahigh-resolution imaging systems, compact polarization optics, and cloaking devices. This review describes the experimental progress recently made fabricating three-dimensional metamaterial structures and discusses some remaining future challenges

Educated mother-tongue South African English: A corpus approach

South Africa is anecdotally known for its complex system of speech varieties correlating with variables such as ethnicity, first language, class and education. These intuitions (e.g. Lass 1990) require further investigation, especially in the context of a changing South Africa where language variety plays a key role in identifying social, economic and ethnic group membership. Thus, in this research, the extent to which these variables play a role in variety is explored using a corpus approach (the nature of class and race in the corpus is discussed more fully later in the article). The corpus project, focusing primarily on accent, has been undertaken by members of the Department of English Language and Linguistics at Rhodes University in South Africa, collaborating with staff from the Department of Electrical and Electronic Engineering from Stellenbosch University, South Africa. A corpus (the first of its kind) is being compiled, comprising the speech of educated, white, mother-tongue speakers of South African English (as distinct from Afrikaans English, Indian English, and the second language (L2) varieties of English used by speakers of indigenous African languages), and data collection is well under way. This short article aims to describe the aims of the project, and the methodological approach which underpins it, as well as to highlight some of the more problematic aspects of the research