41,421 research outputs found
Development of an all-metal thick film cost effective metallization system for solar cells
Improved thick film solar cell contacts for the high volume production of low cost silicon solar arrays are needed. All metal screenable pastes made from economical base metals and suitable for application to low to high conductivity silicon were examined. Silver fluoride containing copper pastes and fluorocarbon containing copper pastes were discussed. The effect of hydrogen on the adhesion of metals to silicon was investigated. A cost analysis of various paste materials is provided
Development of an all-metal thick film cost effective metallization system for solar cells
Electrodes made with pastes produced under the previous contract were analyzed and compared with raw materials. A needle-like structure observed on the electroded solar cell was identified as eutectic copper-silicon, a phase considered to benefit the electrical and metallurgical properties of the contact. Electrodes made from copper fluorocarbon and copper silver fluoride also contained this phase but had poor adhesion. A liquid medium, intended to provide transport during carbon fluoride decomposition was incorporated into the paste resulting in better adhesion. The product survived preliminary environmental tests. A 2 cm by 2 cm solar cell made with fluorocarbon activated copper electrodes and gave 7% AMI efficiency (without AR coating). Both silver fluoride and fluorocarbon screened paste electrodes can be produced for approximately $0.04 per watt
Tool for installing or extracting small bulbs in limited-access spaces
Installing and extracting component of tool is plastic tubing with inside diameter which provides snug fit over bulb. Other components, which provide sturdiness and ease of operation, consist of metal tube, with collar near one end, and plunger, with knob on one end and Teflon tip on the other
Preliminary design study of a regenerative life support system information management and display system
The instrumentation requirements for a regenerative life support systems were studied to provide the earliest possible indication of a malfunction that will permit degradation of the environment. Four categories of parameters were investigated: environmental parameters that directly and immediately influence the health and safety of the cabin crew; subsystems' inputs to the cabin that directly maintain the cabin environmental parameters; indications for maintenance or repair; and parameters useful as diagnostic indicators. A data averager concept is introduced which provides a moving average of parameter values that is not influenced by spurious changes, and is convenient for detecting parameter rates of change. A system is included to provide alarms at preselected parameter levels
Metal (2) 4,4',4",4'" phthalocyanine tetraamines as curing agents for epoxy resins
Metal, preferably divalent copper, cobalt or nickel, phthalocyanine tetraamines are used as curing agents for epoxides. The resulting copolymers have high thermal and chemical resistance and are homogeneous. They are useful as binders for laminates, e.g., graphite cloth laminate
Metal phthalocyanine intermediates for the preparation of polymers
Metal 4, 4', 4"",-tetracarboxylic phthalocyanines (MPTC) are prepared by reaction of trimellitic anhydride, a salt or hydroxide of the desired metal (or the metal in powdered form), urea and a catalyst. A purer form of MPTC is prepared than heretofore. These tetracarboxylic acids are then polymerized by heat to sheet polymers which have superior heat and oxidation resistance. The metal is preferably a divalent metal having an atomic radius close to 1.35A
Metal phthalocyanine polymers
Metal 4, 4', 4", 4"'=tetracarboxylic phthalocyanines (MPTC) are prepared by reaction of trimellitic anhydride, a salt or hydroxide of the desired metal (or the metal in powdered form), urea and a catalyst. A purer form of MPTC is prepared than heretofore. These tetracarboxylic acids are then polymerized by heat to sheet polymers which have superior heat and oxidation resistance. The metal is preferably a divalent metal having an atomic radius close to 1.35A
Populations of Pear Thrips, \u3ci\u3eTaeniothrips Inconsequens\u3c/i\u3e (Thysanoptera: Thripidae) in Sugar Maple Stands in Vermont: 1989-2005
Development of an effective IPM strategy for pear thrips, Taeniothrips inconsequens (Uzel) (Thysanoptera: Thripidae), a pest of sugar maple, Acer saccharum Marshall, demands an understanding of their population fluctuations over time. Pear thrips populations were monitored using a standardized soil sampling method every fall from 1989 – 2005 in 14 counties of Vermont (U.S.). Data from individual sites were combined into north, central and south regions. High numbers of thrips emerged from soil sampled in 1989, 1990, 1993 and 2001, particularly in the north region (Washington, Lamoille, and Franklin counties). The central and south regions had lower pear thrips populations over all years. These results provide, for the first time, fundamental knowledge of pear thrips populations across a wide geographical area of Vermont and will assist in the design of suitable control strategies for pear thrips in the future
Binary planetary nebulae nuclei towards the Galactic bulge. II. A penchant for bipolarity and low-ionisation structures
Considerable effort has been applied towards understanding the precise
shaping mechanisms responsible for the diverse range of morphologies exhibited
by planetary nebulae (PNe). A binary companion is increasingly gaining support
as a dominant shaping mechanism, however morphological studies of the few PNe
that we know for certain were shaped by binary evolution are scarce or biased.
Newly discovered binary central stars (CSPN) from the OGLE-III photometric
variability survey have significantly increased the sample of post
common-envelope (CE) nebulae available for morphological analysis. We present
Gemini South narrow-band images for most of the new sample to complement
existing data in a qualitative morphological study of 30 post-CE nebulae.
Nearly 30% of nebulae have canonical bipolar morphologies, however this rises
to 60% once inclination effects are incorporated with the aid of geometric
models. This is the strongest observational evidence yet linking CE evolution
to bipolar morphologies. A higher than average proportion of the sample shows
low-ionisation knots, filaments or jets suggestive of a binary origin. These
features are also common around emission-line nuclei which may be explained by
speculative binary formation scenarios for H-deficient CSPN.Comment: Accepted for publication in A&
- …