Friction phenomena and their impact on the shear behaviour of granular material

In the discrete element simulation of granular materials, the modelling of contacts is crucial for the prediction of the macroscopic material behaviour. From the tribological point of view, friction at contacts needs to be modelled carefully, as it depends on several factors, e.g. contact normal load or temperature to name only two. In discrete element method (DEM) simulations the usage of Coulomb’s law of friction is state of the art in modelling particle–particle contacts. Usually in Coulomb’s law, for all contacts only one constant coefficient of friction is used, which needs to reflect all tribological effects. Thus, whenever one of the influence factors of friction varies over a wide range, it can be expected that the usage of only one constant coefficient of friction in Coulomb’s law is an oversimplification of reality. For certain materials, e.g. steel, it is known that a dependency of the coefficient of friction on the contact normal load exists. A more tribological tangential contact law is implemented in DEM, where the interparticle friction coefficient depends on the averaged normal stress in the contact. Simulations of direct shear tests are conducted, using steel spheres of different size distributions. The strong influence of interparticle friction on the bulk friction is shown via a variation of the constant interparticle friction coefficient. Simulations with constant and stress-dependent interparticle friction are compared. For the stress-dependent interparticle friction, a normal stress dependency of the bulk friction is seen. In the literature, measurements of different granular materials and small normal loads also show a stress dependency of the bulk friction coefficient. With increasing applied normal stress, the bulk friction coefficient reduces both in the experiments and in the simulations

Controlled Formation of Porous 2D Lattices from C 3 ‐symmetric Ph 6 −Me‐Tribenzotriquinacene‐OAc 3

The on-surface self-assembly of molecules to form holey nanographenes is a promising approach to control the properties of the resulting 2D lattice. Usually, planar molecules are utilized to prepare flat, structurally confined molecular layers, with only a few recent examples of warped precursors. However, control of the superstructures is limited thus far. Herein, we report the temperature-controlled self-assembly of a bowl-shaped, acetylated C3 -symmetric hexaphenyltribenzotriquinacene derivative on Cu(111). Combining scanning tunneling microscopy (STM) and density functional theory (DFT) confirms the formation of highly differing arrangements starting with π-stacked bowl-to-bowl dimers at low coverage at room temperature via chiral honeycomb structures, an intermediate trigonal superstructure, followed by a fully carbon-based, flattened hexagonal superstructure formed by on-surface deacetylation, which is proposed as a precursor for holey graphene networks with unique defect structures

Influence of solvent granularity on the effective interaction between charged colloidal suspensions

We study the effect of solvent granularity on the effective force between two charged colloidal particles by computer simulations of the primitive model of strongly asymmetric electrolytes with an explicitly added hard sphere solvent. Apart from molecular oscillating forces for nearly touching colloids which arise from solvent and counterion layering, the counterions are attracted towards the colloidal surfaces by solvent depletion providing a simple statistical description of hydration. This, in turn, has an important influence on the effective forces for larger distances which are considerably reduced as compared to the prediction based on the primitive model. When these forces are repulsive, the long-distance behaviour can be described by an effective Yukawa pair potential with a solvent-renormalized charge. As a function of colloidal volume fraction and added salt concentration, this solvent-renormalized charge behaves qualitatively similar to that obtained via the Poisson-Boltzmann cell model but there are quantitative differences. For divalent counterions and nano-sized colloids, on the other hand, the hydration may lead to overscreened colloids with mutual attraction while the primitive model yields repulsive forces. All these new effects can be accounted for through a solvent-averaged primitive model (SPM) which is obtained from the full model by integrating out the solvent degrees of freedom. The SPM was used to access larger colloidal particles without simulating the solvent explicitly.Comment: 14 pages, 16 craphic

Controlled formation of porous 2D lattices from C3‐symmetric Ph6-Me‐tribenzotriquinacene‐OAc3

The on‐surface self‐assembly of molecules to form holey nanographenes is a promising approach to control the properties of the resulting 2D lattice. Usually, planar molecules are utilized to prepare flat, structurally confined molecular layers, with only a few recent examples of warped precursors. However, control of the superstructures is limited thus far. Herein, we report the temperature‐controlled self‐assembly of a bowl‐shaped, acetylated C3‐symmetric hexaphenyltribenzotriquinacene derivative on Cu(111). Combining scanning tunneling microscopy (STM) and density functional theory (DFT) confirms the formation of highly differing arrangements starting with π‐stacked bowl‐to‐bowl dimers at low coverage at room temperature via chiral honeycomb structures, an intermediate trigonal superstructure, followed by a fully carbon‐based, flattened hexagonal superstructure formed by on‐surface deacetylation, which is proposed as a precursor for holey graphene networks with unique defect structures.Deutsche ForschungsgemeinschaftDeutscher Akademischer AustauschdienstProjekt DEA

The pre-concept design of the DEMO tritium, matter injection and vacuum systems

In the Pre-Concept Design Phase of EU-DEMO, the work package TFV (Tritium – Matter Injection – Vacuum) has developed a tritium self-sufficient three-loop fuel cycle architecture. Driven by the need to reduce the tritium inventory in the systems to an absolute minimum, this requires the continual recirculation of gases in loops without storage, avoiding hold-ups of tritium in each process stage by giving preference to continuous over batch technologies, and immediate use of tritium extracted from tritium breeding blankets. In order to achieve this goal, a number of novel concepts and technologies had to be found and their principal feasibility to be shown. This paper starts from a functional analysis of the fuel cycle and introduces the results of a technology survey and ranking exercise which provided the prime technology candidates for all system blocks. The main boundary conditions for the TFV systems are described based on which the fuel cycle architecture was developed and the required operational windows of all subsystems were defined. To validate this, various R&D lines were established, selected results of which are reported, together with the key technology developments. Finally, an outlook towards the Concept Design Phase is given

The psychopathological and psychosocial outcome of early-onset schizophrenia: Preliminary data of a 13-year follow-up

<p>Abstract</p> <p>Background</p> <p>Relatively little is known about the long-term psychopathological and psychosocial outcome of early-onset schizophrenia. The existing literature describes more severe courses of illness in these patients compared with adult-onset schizophrenia. This article reports preliminary data of a study exploring the outcome of early-onset schizophrenia 13.4 years (mean) after first admission. Predictors for interindividual outcomes were investigated.</p> <p>Methods</p> <p>We retrospectively assessed 27 former patients (mean age at first admission 15.5 years, SD = 2.0) that were consecutively admitted to the Department of Child and Adolescent Psychiatry at the University of Wuerzburg between 1990 and 2000. A multidimensional approach was chosen to assess the outcome consisting of a mail survey including different questions about psychopathological symptoms, psychosocial parameters, and standardized self-reports (ESI and ADS).</p> <p>Results</p> <p>Concerning the psychopathological outcome, 22.2% reported having acute schizophrenic symptoms. Almost one third (30.8%) described symptoms of depression and 37.0% reported having tried to commit suicide or seriously thought about it. 77.8% of the former patients were still in outpatient treatment. Compared to the general population, the number of patients without a school graduation was relatively high (18.5%). Almost half of participants still live with their parents (48.1%) or in assisted or semi-assisted living conditions (33.3%). Only 18.5% were working in the open market.</p> <p>Conclusion</p> <p>Schizophrenia with an early onset has an unfavourable prognosis. Our retrospective study of the psychopathological and psychosocial outcome concludes with a generally poor rating.</p

Augmented Reality to Improve Surgical Workflow in Minimally Invasive Transforaminal Lumbar Interbody Fusion – A Feasibility Study With Case Series

Objective Minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) is a highly reproducible procedure for the fusion of spinal segments. We recently introduced the concept of “total navigation” to improve workflow and eliminate fluoroscopy. Image-guided surgery incorporating augmented reality (AR) may further facilitate workflow. In this study, we developed and evaluated a protocol to integrate AR into the workflow of MIS-TLIF. Methods A case series of 10 patients was the basis for the evaluation of a protocol to facilitate tubular MIS-TLIF by the application of AR. Surgical TLIF landmarks were marked on a preoperative computed tomography (CT)-scan using dedicated software. This marked CT scan was fused intraoperatively with the low-dose navigation CT scan using elastic image fusion, and the markers were transferred to the intraoperative scan. Our experience with this workflow and the surgical outcomes were collected. Results Our AR protocol was safely implemented in all cases. The TLIF landmarks could be preoperatively planned and transferred to the intraoperative imaging. Of the 10 cases, 1 case had additionally a synovial cyst resection and in 2 cases an additional bony decompression was performed due to central stenosis. The average procedure time was 160.6±31.9 minutes. The AR implementation added 1.72±0.37 minutes to the overall procedure time. No complications occurred. Conclusion Our findings support the idea that total navigation with AR may further facilitate the workflow, especially in cases with more complex anatomy and for teaching and training purposes. More work is needed to simplify the software and make AR integration more user-friendly

Synthesis, structure, and opto-electronic properties of organic-based nanoscale heterojunctions

Enormous research effort has been put into optimizing organic-based opto-electronic systems for efficient generation of free charge carriers. This optimization is mainly due to typically high dissociation energy (0.1-1 eV) and short diffusion length (10 nm) of excitons in organic materials. Inherently, interplay of microscopic structural, chemical, and opto-electronic properties plays crucial role. We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties. By adjusting parameters of contact- and tapping-mode atomic force microscopy (AFM), we perform morphologic and mechanical characterizations (nanoshaving) of organic layers, measure their electrical conductivity by current-sensing AFM, and deduce work functions and surface photovoltage (SPV) effects by Kelvin force microscopy using high spatial resolution. These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data. We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond

European integration assessed in the light of the 'rules vs. standards debate'

The interplay of various legal systems in the European Union (EU) has long triggered a debate on the tension between uniformity and diversity of Member States' (MS) laws. This debate takes place among European legal scholars and is also paralleled by economic scholars, e.g. in the ambit of the 'theory of federalism'. This paper takes an innovative perspective on the discrepancy between 'centralized' and 'decentralized' law-making in the EU by assessing it with the help of the rules versus standards debate. When should the EU legislator grant the national legislator leeway in the formulation of new laws and when should all be fixed ex ante at European level? The literature on the 'optimal shape of legal norms' shall be revisited in the light of law-making in the EU, centrally dealing with the question how much discretion shall be given to the national legislator; and under which circumstances. This paper enhances the established decisive factors for the choice of a rule or a standard in a national setting (complexity, volatility, judges' specialization and frequency of application) by two new crucial factors (switching costs and the benefit of uniformity in terms of information costs) in order to assess law-making policies at EU level

Pathogenesis of Candida albicans Infections in the Alternative Chorio-Allantoic Membrane Chicken Embryo Model Resembles Systemic Murine Infections

Alternative models of microbial infections are increasingly used to screen virulence determinants of pathogens. In this study, we investigated the pathogenesis of Candida albicans and C. glabrata infections in chicken embryos infected via the chorio-allantoic membrane (CAM) and analyzed the virulence of deletion mutants. The developing immune system of the host significantly influenced susceptibility: With increasing age, embryos became more resistant and mounted a more balanced immune response, characterized by lower induction of proinflammatory cytokines and increased transcription of regulatory cytokines, suggesting that immunopathology contributes to pathogenesis. While many aspects of the chicken embryo response resembled murine infections, we also observed significant differences: In contrast to systemic infections in mice, IL-10 had a beneficial effect in chicken embryos. IL-22 and IL-17A were only upregulated after the peak mortality in the chicken embryo model occurred; thus, the role of the Th17 response in this model remains unclear. Abscess formation occurs frequently in murine models, whereas the avian response was dominated by granuloma formation. Pathogenicity of the majority of 15 tested C. albicans deletion strains was comparable to the virulence in mouse models and reduced virulence was associated with significantly lower transcription of proinflammatory cytokines. However, fungal burden did not correlate with virulence and for few mutants like bcr1Δ and tec1Δ different outcomes in survival compared to murine infections were observed. C. albicans strains locked in the yeast stage disseminated significantly more often from the CAM into the embryo, supporting the hypothesis that the yeast morphology is responsible for dissemination in systemic infections. These data suggest that the pathogenesis of C. albicans infections in the chicken embryo model resembles systemic murine infections but also differs in some aspects. Despite its limitations, it presents a useful alternative tool to pre-screen C. albicans strains to select strains for subsequent testing in murine models