In situ characterization of vertically oriented carbon nanofibers for three-dimensional nano-electro-mechanical device applications

We have performed mechanical and electrical characterization of individual as-grown, vertically oriented carbon nanofibers (CNFs) using in situ techniques, where such high-aspect-ratio, nanoscale structures are of interest for three-dimensional (3D) electronics, in particular 3D nano-electro-mechanical-systems (NEMS). Nanoindentation and uniaxial compression tests conducted in an in situ nanomechanical instrument, SEMentor, suggest that the CNFs undergo severe bending prior to fracture, which always occurs close to the bottom rather than at the substrate–tube interface, suggesting that the CNFs are well adhered to the substrate. This is also consistent with bending tests on individual tubes which indicated that bending angles as large as ~70° could be accommodated elastically. In situ electrical transport measurements revealed that the CNFs grown on refractory metallic nitride buffer layers were conducting via the sidewalls, whereas those synthesized directly on Si were electrically unsuitable for low-voltage dc NEMS applications. Electrostatic actuation was also demonstrated with a nanoprobe in close proximity to a single CNF and suggests that such structures are attractive for nonvolatile memory applications. Since the magnitude of the actuation voltage is intimately dictated by the physical characteristics of the CNFs, such as diameter and length, we also addressed the ability to tune these parameters, to some extent, by adjusting the plasma-enhanced chemical vapor deposition growth parameters with this bottom-up synthesis approach

Nanoshearing - Collective carbon nanotube micromechanics

N/

Five-minute oscillation power within magnetic elements in the solar atmosphere

It has long been known that magnetic plage and sunspots are regions in which the power of acoustic waves is reduced within the photospheric layers. Recent observations now suggest that this suppression of power extends into the low chromosphere and is also present in small magnetic elements far from active regions. In this paper we investigate the observed power suppression in plage and magnetic elements, by modeling each as a collection of vertically aligned magnetic fibrils and presuming that the velocity within each fibril is the response to buffeting by incident p modes in the surrounding field-free atmosphere. We restrict our attention to modeling observations made near the solar disk center, where the line-of-sight velocity is nearly vertical and hence, only the longitudinal component of the motion within the fibril contributes. Therefore, we only consider the excitation of axisymmetric sausage waves and ignore kink oscillations as their motions are primarily horizontal. We compare the vertical motion within the fibril with the vertical motion of the incident p mode by constructing the ratio of their powers. In agreement with observational measurements we find that the total power is suppressed within strong magnetic elements for frequencies below the acoustic cut-off frequency. However, further physical effects need to be examined for understanding the observed power ratios for stronger magnetic field strengths and higher frequencies. We also find that the magnitude of the power deficit increases with the height above the photosphere at which the measurement is made. Furthermore, we argue that the area of the solar disk over which the power suppression extends increases as a function of height

In situ Mechanical Testing Reveals Periodic Buckle Nucleation and Propagation in Carbon Nanotube Bundles

Uniaxial compression studies are performed on 50-µm-diameter bundles of nominally vertical, intertwined carbon nanotubes grown via chemical vapor deposition from a photolithographically defined catalyst. The inhomogeneous microstructure is examined, demonstrating density and tube orientation gradients, believed to play a role in the unique periodic buckling deformation mechanism. Through in situ uniaxial compression experiments it is discovered that the characteristic bottom-to-top sequential buckling proceeds by first nucleating on the bundle surface and subsequently propagating laterally through the bundle, gradually collapsing the entire structure. The effects of strain rate are explored, and storage and loss stiffnesses are analyzed in the context of energy dissipation

Refining grain structure and porosity of an aluminium alloy with intensive melt shearing

The official published version of the article can be obtained at the link below.Intensive melt shearing was achieved using a twin-screw machine to condition an aluminium alloy prior to solidification. The results show that intensive melt shearing has a significant grain-refining effect. In addition, the intensive melt shearing reduces both the volume fraction and the size of porosity. It can reduce the density index from 10.50% to 2.87% and the average size of porosity in the samples solidified under partial vacuum from around 1 mm to 100 μm.Financial support was obtained from the EPSRC and the Technology Strategy Board

Ultra-fast calorimetry study of Ge₂Sb₂Te₅ crystallization between dielectric layers

Phase changes in chalcogenides such as Ge2Sb2Te5 can be exploited in non-volatile random-access memory, with fast crystallization crucial for device operation. Ultra-fast differential scanning calorimetry, heating at rates up to 40,000K s-1, has been used to study the crystallization of amorphous Ge2Sb2Te5 with and without sandwich layers of ZnS-SiO2. At heating rates up to 1000K s-1, the sandwich layers retard crystallization, an effect attributed to crystallization-induced stress. At greater heating rates (>or = 5000K s-1), and consequently higher crystallization temperatures, the stress is relaxed, and sandwich layers catalyze crystallization. Implications for memory-device performance are discussed

De l’idéologie de l’espace à l’idéologie dans l’espace

Plutôt que d'étudier les dimensions idéologiques du discours des géographes, cet article s'interroge sur la pertinence et les méthodes possibles d'une lecture de l'inscription de la dimension idéologique d'une société dans l'espace que celle-ci a produit. Rappelant l'importance d'une réflexion géographique sur les caractéristiques spatiales liées à l'idéologie d'une formation sociale, les auteurs s'appuient sur les études ayant pour but de mesurer la qualité de la vie, telle que perçue par les habitants, ainsi que sur celles portant sur la perception et l'économie politique du risque nucléaire pour reconnaître l'intérêt et la possibilité, sous certaines conditions, d'une étude scientifique des faits idéologiques, tels qu'en dernière analyse ils se lisent dans l'espace géographique lui-même.Rather than studying the ideological dimension of geographical discourse, this article addresses the question of the relevance and possible methodology for analyzing ideological dimensions, within the space created by a given society. Recalling the importance of a geographical approach to spatial characteristics linked to the ideologies of social formations, the authors base their work on studies whose aim is to measure the quality of life, as perceived by the population, as well as those dealing with the awareness and political economy of nuclear risks, to define the relevance and feasibility, under certain circumstances, of the scientific study of ideological phenomena, such as can be ascertained, in the final analysis, from a given geographical space

Catastrophic vs Gradual Collapse of Thin-Walled Nanocrystalline Ni Hollow Cylinders As Building Blocks of Microlattice Structures

Lightweight yet stiff and strong lattice structures are attractive for various engineering applications, such as cores of sandwich shells and components designed for impact mitigation. Recent breakthroughs in manufacturing enable efficient fabrication of hierarchically architected microlattices, with dimensional control spanning seven orders of magnitude in length scale. These materials have the potential to exploit desirable nanoscale-size effects in a macroscopic structure, as long as their mechanical behavior at each appropriate scale – nano, micro, and macro levels – is properly understood. In this letter, we report the nanomechanical response of individual microlattice members. We show that hollow nanocrystalline Ni cylinders differing only in wall thicknesses, 500 and 150 nm, exhibit strikingly different collapse modes: the 500 nm sample collapses in a brittle manner, via a single strain burst, while the 150 nm sample shows a gradual collapse, via a series of small and discrete strain bursts. Further, compressive strength in 150 nm sample is 99.2% lower than predicted by shell buckling theory, likely due to localized buckling and fracture events observed during in situ compression experiments. We attribute this difference to the size-induced transition in deformation behavior, unique to nanoscale, and discuss it in the framework of “size effects” in crystalline strength