Computer aided inspection procedures to support smart manufacturing of injection moulded components

This work presents Reverse Engineering and Computer Aided technologies to improve the inspection of injection moulded electro-mechanical parts. Through a strong integration and automation of these methods, tolerance analysis, acquisition tool-path optimization and data management are performed. The core of the procedure concerns the automation of the data measure originally developed through voxel-based segmentation. This paper discusses the overall framework and its integration made according to Smart Manufacturing requirements. The experimental set-up, now in operative conditions at ABB SACE, is composed of a laser scanner installed on a CMM machine able to measure components with lengths in the range of 5÷250 mm, (b) a tool path optimization procedure and (c) a data management both developed as CAD-based applications

Leak-rate of seals: comparison of theory with experiment

Seals are extremely useful devices to prevent fluid leakage. We present experimental results for the leak-rate of rubber seals, and compare the results to a novel theory, which is based on percolation theory and a recently developed contact mechanics theory. We find good agreement between theory and experiment.Comment: 6 pages, 10 figure

Interfacial separation between elastic solids with randomly rough surfaces: comparison of experiment with theory

We study the average separation between an elastic solid and a hard solid with a nominal flat but randomly rough surface, as a function of the squeezing pressure. We present experimental results for a silicon rubber (PDMS) block with a flat surface squeezed against an asphalt road surface. The theory shows that an effective repulse pressure act between the surfaces of the form p proportional to exp(-u/u0), where u is the average separation between the surfaces and u0 a constant of order the root-mean-square roughness, in good agreement with the experimental results.Comment: 6 pages, 10 figure

Fluid flow at the interface between elastic solids with randomly rough surfaces

I study fluid flow at the interface between elastic solids with randomly rough surfaces. I use the contact mechanics model of Persson to take into account the elastic interaction between the solid walls and the Bruggeman effective medium theory to account for the influence of the disorder on the fluid flow. I calculate the flow tensor which determines the pressure flow factor and, e.g., the leak-rate of static seals. I show how the perturbation treatment of Tripp can be extended to arbitrary order in the ratio between the root-mean-square roughness amplitude and the average interfacial surface separation. I introduce a matrix D(Zeta), determined by the surface roughness power spectrum, which can be used to describe the anisotropy of the surface at any magnification Zeta. I present results for the asymmetry factor Gamma(Zeta) (generalized Peklenik number) for grinded steel and sandblasted PMMA surfaces.Comment: 16 pages, 14 figure

A characterization of compact complex tori via automorphism groups

We show that a compact Kaehler manifold X is a complex torus if both the continuous part and discrete part of some automorphism group G of X are infinite groups, unless X is bimeromorphic to a non-trivial G-equivariant fibration. Some applications to dynamics are given.Comment: title changed, to appear in Math. An

There is a short gamma-ray burst prompt phase at the beginning of each long one

We compare the prompt intrinsic spectral properties of a sample of short Gamma--ray Burst (GRB) with the first 0.3 seconds (rest frame) of long GRBs observed by Fermi/GBM. We find that short GRBs and the first part of long GRBs lie on the same E_p--E_iso correlation, that is parallel to the relation for the time averaged spectra of long GRBs. Moreover, they are indistinguishable in the E_p--L_iso plane. This suggests that the emission mechanism is the same for short and for the beginning of long events, and both short and long GRBs are very similar phenomena, occurring on different timescales. If the central engine of a long GRB would stop after ~0.3 * (1+z) seconds the resulting event would be spectrally indistinguishable from a short GRB.Comment: 14 pages, 6 figures, MNRAS accepte

Theory of high-energy emission from the pulsar/Be-star system PSR 1259−-63 I: radiation mechanisms and interaction geometry

We study the physical processes of the PSR B1259-63 system containing a 47 ms pulsar orbiting around a Be star in a highly eccentric orbit. Motivated by the results of a multiwavelength campaign during the January 1994 periastron passage of PSR B1259-63, we discuss several issues regarding the mechanism of high-energy emission. Unpulsed power law emission from the this system was detected near periastron in the energy range 1-200 keV. We find that the observed high energy emission from the PSR B1259-63 system is not compatible with accretion or propeller-powered emission. Shock-powered high-energy emission produced by the pulsar/outflow interaction is consistent with all high energy observations. By studying the evolution of the pulsar cavity we constrain the magnitude and geometry of the mass outflow outflow of the Be star. The pulsar/outflow interaction is most likely mediated by a collisionless shock at the internal boundary of the pulsar cavity. The system shows all the characteristics of a {\it binary plerion} being {\it diffuse} and {\it compact} near apastron and periastron, respectively. The PSR B1259-63 cavity is subject to different radiative regimes depending on whether synchrotron or inverse Compton (IC) cooling dominates the radiation of electron/positron pairs advected away from the inner boundary of the pulsar cavity. The highly non-thermal nature of the observed X-ray/gamma-ray emission near periastron establishes the existence of an efficient particle acceleration mechanism within a timescale shown to be less than $\sim 10^2-10^3$ s. A synchrotron/IC model of emission of e\pm-pairs accelerated at the inner shock front of the pulsar cavity and adiabatically expanding in the MHD flow provides an excellent explanation of the observed time variableX-ray flux and spectrum from the PSRComment: 68 pages, accepted for publication in the Astrophys. J. on Aug. 26, 199

Nucleon decay and atmospheric neutrinos in the Mont Blanc experiment

In the NUSEX experiment, during 2.8 years of operation, 31 fully contained events have been collected; 3 among them are nucleon decay candidates, while the others have been attributed to upsilon interactions. Limits on nucleon lifetime and determinations of upsilon interaction rates are presented

Double solid twistor spaces: the case of arbitrary signature

In a recent paper (math.DG/0701278) we constructed a series of new Moishezon twistor spaces which is a kind of variant of the famous LeBrun twistor spaces. In this paper we explicitly give projective models of another series of Moishezon twistor spaces on nCP^2 for arbitrary n>2, which can be regarded as a generalization of the twistor spaces of a 'double solid type' on 3CP^2 studied by Kreussler, Kurke, Poon and the author. Similarly to the twistor spaces of 'double solid type' on 3CP^2, projective models of present twistor spaces have a natural structure of double covering of a CP^2-bundle over CP^1. We explicitly give a defining polynomial of the branch divisor of the double covering whose restriction to fibers are degree four. If n>3 these are new twistor spaces, to the best of the author's knowledge. We also compute the dimension of the moduli space of these twistor spaces. Differently from math.DG/0701278, the present investigation is based on analysis of pluri-(half-)anticanonical systems of the twistor spaces.Comment: 30 pages, 3 figures; v2: title changed (the original title was "Explicit construction of new Moishezon twistor spaces, II".

Timing accuracy of the Swift X-Ray Telescope in WT mode

The X-Ray Telescope (XRT) on board Swift was mainly designed to provide detailed position, timing and spectroscopic information on Gamma-Ray Burst (GRB) afterglows. During the mission lifetime the fraction of observing time allocated to other types of source has been steadily increased. In this paper, we report on the results of the in-flight calibration of the timing capabilities of the XRT in Windowed Timing read-out mode. We use observations of the Crab pulsar to evaluate the accuracy of the pulse period determination by comparing the values obtained by the XRT timing analysis with the values derived from radio monitoring. We also check the absolute time reconstruction measuring the phase position of the main peak in the Crab profile and comparing it both with the value reported in literature and with the result that we obtain from a simultaneous Rossi X-Ray Timing Explorer (RXTE) observation. We find that the accuracy in period determination for the Crab pulsar is of the order of a few picoseconds for the observation with the largest data time span. The absolute time reconstruction, measured using the position of the Crab main peak, shows that the main peak anticipates the phase of the position reported in literature for RXTE by ~270 microseconds on average (~150 microseconds when data are reduced with the attitude file corrected with the UVOT data). The analysis of the simultaneous Swift-XRT and RXTE Proportional Counter Array (PCA) observations confirms that the XRT Crab profile leads the PCA profile by ~200 microseconds. The analysis of XRT Photodiode mode data and BAT event data shows a main peak position in good agreement with the RXTE, suggesting the discrepancy observed in XRT data in Windowed Timing mode is likely due to a systematic offset in the time assignment for this XRT read out mode.Comment: 6 pages, 4 figures. Accepted for publication on Astronomy&Astrophysic