Full-field optical measurement of curvatures in ultra-thin-film–substrate systems in the range of geometrically nonlinear deformations

This article describes coherent gradient sensing (CGS) as an optical, full-field, real-time, nonintrusive, and noncontact technique for the measurement of curvatures and nonuniform curvature changes in film-substrate systems. The technique is applied to the study of curvature fields in thin Al films (6 mum) deposited on thin circular silicon wafers (105 mum) of "large" in-plane dimensions (50.8 mm in diameter) subjected to thermal loading histories. The loading and geometry is such that the system experiences deformations that are clearly within the nonlinear range. The discussion is focused on investigating the limits of the range of the linear relationship between the thermally induced mismatch strain and the substrate curvature, on the degree to which the substrate curvature becomes spatially nonuniform in the range of geometrically nonlinear deformation, and finally, on the bifurcation of deformation mode from axial symmetry to asymmetry with increasing mismatch strain. Results obtained on the basis of both simple models and more-detailed finite-element simulations are compared with the full-field CGS measurements with the purpose of validating the analytical and numerical models

Super-roughening as a disorder-dominated flat phase

We study the phenomenon of super-roughening found on surfaces growing on disordered substrates. We consider a one-dimensional version of the problem for which the pure, ordered model exhibits a roughening phase transition. Extensive numerical simulations combined with analytical approximations indicate that super-roughening is a regime of asymptotically flat surfaces with non-trivial, rough short-scale features arising from the competition between surface tension and disorder. Based on this evidence and on previous simulations of the two-dimensional Random sine-Gordon model [Sanchez et al., Phys. Rev. E 62, 3219 (2000)], we argue that this scenario is general and explains equally well the hitherto poorly understood two-dimensional case.Comment: 7 pages, 4 figures. Accepted for publication in Europhysics Letter

Effect of tillage and cover on runoff and soil losses in the central region of Buenos Aires province

El objetivo de este trabajo fue evaluar a campo la efectividad de diferentes tipos de labranzas junto con distintos grados de cobertura vegetal (CV) del suelo sobre el escurrimiento (E) y la pérdida de suelo (Ps). Se seleccionaron 34 sitios experimentales bajo labranza tradicional (LT) y siembra directa (SD), con diferentes niveles de CV (C1- < 49, C2- 50-79% y C3- > 80%). Se utilizó un diseño experimental completamente aleatorizado con 4 tratamientos y desigual número de repeticiones: 1) SD-C3, 2) LT-C3, 3) LT-C2, y 4) LT-C1, resultante de combinar el tipo de labranza con CV. Se realizó un ANOVA (p ≤ 0,05) y un análisis de contrastes ortogonales: 1) SD-C3 vs LT-C3, 2) LT-C1 vs LT-C2, y 3) C3 vs LT-C2+C1. Al cabo de cada simulación de lluvia se obtuvo el E y Ps. Se determinó: contenido de materia orgánica (CMO), contenido hídrico (CH) y densidad aparente del suelo (DA) en los 10 cm superficiales, y la pendiente (P) del terreno. La LT presentó mayor E y Ps en todos tratamientos evaluados respecto de SD. El mayor E (26,8 mm) se registró en LT-C2, y el menor (0,5 mm) en SD-C3. La Ps mostró igual tendencia que el E con 11,6 y 0,1 g respectivamente. Los contrastes mostraron E estadísticamente diferentes para los tres contrastes, mientras la Ps fue estadísticamente diferente en los contrastes Nº 2 y 3. Escurrimiento y Ps se correlacionaron entre sí (R2 = 0,98) y con P (R2 = 0,83 y 0,72 respectivamente). Los resultados obtenidos demuestran la importancia del efecto protector de la CV del suelo. Sin embargo, el CMO y CH, y la P y DA deben ser considerados también en el proceso de E - erosión del suelo.The objective of this work was evaluate on field the effectiveness of tillage and different grades of soil cover (CV) on runoff (E) and soil losses (Ps). Thirty four experimental sites on conventional tillage (LT) and no-till (SD) with CV levels (C1- < 49, C2- 50-79% y C3- > 80%) were selected. A randomized completely experimental design was used, with 4 treatments and unequal repetition numbers: 1) SD-C3, 2) LT-C3, 3) LT-C2, y 4) LT-C1, which resulted of combination of tillage and CV. An ANVA (p ≤ 0.05) and orthogonal contrast analysis were carried out: 1) SD-C3 vs LT-C3, 2) LT-C1 vs LT-C2, y 3) C3 vs LT-C2+C1. Runoff and Ps were obtained when each simulate event finished. Soil organic matter (CMO), water content (CH) and soil bulk density (DA) on 10 cm top soil, and land slope were determined. Runoff and Ps always were higher on CT than SD. LT-C2 had the highest R (26.8 mm) and SD-C3 had the smallest R (0.5 mm). Soil loss showed the same tend than E with 11.6 y 0.1 g respectively. The three orthogonal contrast show E statistically different and Ps was in the contrasts Nº 2 and 3. Runoff and Ps were correlated between the two of them (R2 = 0.98), and with P (R2 = 0.83 y 0.72 respectively). Results show the important protective effect of soil CV. However, CMO, CH, P y DA should be considered in the E - soil erosion process.Fil: Crespo, Roberto J.. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de AgronomíaFil: Ares, Guadalupe. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de AgronomíaFil: Sfeir, Alberto. Universidad Nacional del Centro de la Provincia de Buenos Aires. Facultad de AgronomíaFil: Wingeyer, Ana B.. University of Nebraska-Lincoln. Department of Agronomy and Horticulture.Fil: Usunoff, Eduardo

Collective modes of coupled phase oscillators with delayed coupling

We study the effects of delayed coupling on timing and pattern formation in spatially extended systems of dynamic oscillators. Starting from a discrete lattice of coupled oscillators, we derive a generic continuum theory for collective modes of long wavelength. We use this approach to study spatial phase profiles of cellular oscillators in the segmentation clock, a dynamic patterning system of vertebrate embryos. Collective wave patterns result from the interplay of coupling delays and moving boundary conditions. We show that the phase profiles of collective modes depend on coupling delays.Comment: 5 pages, 2 figure

Locked and Unlocked Chains of Planar Shapes

We extend linkage unfolding results from the well-studied case of polygonal linkages to the more general case of linkages of polygons. More precisely, we consider chains of nonoverlapping rigid planar shapes (Jordan regions) that are hinged together sequentially at rotatable joints. Our goal is to characterize the families of planar shapes that admit locked chains, where some configurations cannot be reached by continuous reconfiguration without self-intersection, and which families of planar shapes guarantee universal foldability, where every chain is guaranteed to have a connected configuration space. Previously, only obtuse triangles were known to admit locked shapes, and only line segments were known to guarantee universal foldability. We show that a surprisingly general family of planar shapes, called slender adornments, guarantees universal foldability: roughly, the distance from each edge along the path along the boundary of the slender adornment to each hinge should be monotone. In contrast, we show that isosceles triangles with any desired apex angle less than 90 degrees admit locked chains, which is precisely the threshold beyond which the inward-normal property no longer holds.Comment: 23 pages, 25 figures, Latex; full journal version with all proof details. (Fixed crash-induced bugs in the abstract.

A comparative study of Tam3 and Ac transposition in transgenic tobacco and petunia plants

Transposition of the Anthirrinum majus Tam3 element and the Zea mays Ac element has been monitored in petunia and tobacco plants. Plant vectors were constructed with the transposable elements cloned into the leader sequence of a marker gene. Agrobacterium tumefaciens-mediated leaf disc transformation was used to introduce the transposable element constructs into plant cells. In transgenic plants, excision of the transposable element restores gene expression and results in a clearly distinguishable phenotype. Based on restored expression of the hygromycin phosphotransferase II (HPTII) gene, we established that Tam3 excises in 30% of the transformed petunia plants and in 60% of the transformed tobacco plants. Ac excises from the HPTII gene with comparable frequencies (30%) in both plant species. When the β-glucuronidase (GUS) gene was used to detect transposition of Tam3, a significantly lower excision frequency (13%) was found in both plant species. It could be shown that deletion of parts of the transposable elements Tam3 and Ac, removing either one of the terminal inverted repeats (TIR) or part of the presumptive transposase coding region, abolished the excision from the marker genes. This demonstrates that excision of the transposable element Tam3 in heterologous plant species, as documented for the autonomous element Ac, also depends on both properties. Southern blot hybridization shows the expected excision pattern and the reintegration of Tam3 and Ac elements into the genome of tobacco plants.

Research and development project assessment and social impact

Nowadays, organisations increasingly need to adapt to the fast evolution of markets and societies in our globalised world in order to be competitive. Therefore, it is essential to take the right decisions when it comes to invest in research and development (R & D) projects. However, an issue that has not been given much attention is how to measure the social impact (or return) of R & D projects. In this exploratory study, the findings of an analysis of how R & D projects are assessed and selected, including this social perspective, are presented. The methodology which has been used in this research includes both interviews and analysis of the data obtained through them. The major finding is that in the current situation the social impact is not taken into account, but is growing the awareness of this perspective among different types of organizations dealing with R & D activities.(undefined)info:eu-repo/semantics/publishedVersio