Youth unemployment and armed insurrection in post-military Nigeria: the contending issues

This article provides an overview of the internal conflicts within Nigeria, doing so primarily through explaining the role of Nigeria’s youth in either igniting or sustaining the types of insurgency that have plagued the country in the post-military era. In pursuing this, the paper focuses on the activities of the Niger Delta militants, which dominated the start of the current democratic dispensation, and those of the Boko Haram insurgents in the north. The paper suggests socio-economic empowerment of the youths as an antidote to youth unemployment, and, by extension, as a way to avert future armed insurrection and other forms of violent conflicts that have become synonymous with Nigerian youths

What does Paris mean for Africa? An Integrated Assessment analysis of the effects of the Paris Agreement on African economies. ESRI Working Paper 690 December 2020.

Climate change is considered the biggest environmental challenge facing the world. The expected concomitant economic impacts of climate change are substantial, where the African continent is expected to be particularly vulnerable. Research is needed to support the development of sound climate policies in Africa. This paper develops a new Integrated Assessment Model -AD-AFRICA- which allows a comprehensive analysis of climate change impacts and adaptation in Africa. The AD-AFRICA model divides Africa into five regions and includes seven specific climate change impacts. The effects of the Paris agreement Intended Nationally Determined Contributions (INDCs) and the below 2 degrees target are investigated. The results show that though the INDCs reduce impacts, reaching the goal of the agreement will further reduce impacts by almost 1.6 % of GDP (588,731 US$Billion). This highlights the importance of re-examining the level of INDCs. Furthermore, our results show that health and tourism impacts are highest and that different regions in Africa are more vulnerable to different climate change impacts depending on their level of development and regional characteristics. Finally, the withdrawal of the US from the Paris Agreement would result in an additional climate change burden of around 87 US$ Billions to Africa

Predicted percentage dissatisfied (PPD) model evaluation of evaporative cooling potentials of some selected cities in Nigeria

In some developing nations like Nigeria, poverty and epileptic power supply are the twin problems impeding people from the use of refrigeration - based air conditioning systems to achieve thermal comfort. Direct evaporative cooling is a viable option of achi eving thermal comfort especially in hot and dry climates. Direct evaporative coolers, apart from their low power requirements, are relatively cheap and are environment friendly. This paper attempts to estimate the direct evaporative cooling potential of so me selected cities in Nigeria using the predicted percentage dissatisfied (PPD) model. The model stipulates that a conditioned space is thermally comfortable if not more than 20% of the occupants are thermally unsatisfied. These selected cities are Enugu, Kano, Jos, Maiduguri and Mubi - South. The computed PPD for the months of January through December for the selected cities were determined. The computed PPD of these cities reveal the suitability of using evaporative coolers in the months of January and Dece mber for Enugu; all the twelve months for Kano; January, February, March, April, May, September, October, November and December for Jos; January, February, March, April, May, June, October, November and December for Maiduguri and, all the twelve months for Mubi - South, because their computed PPD in these months are less than 20%. This, however, shows that there is high potential of using direct evaporative coolers in Kano, Jos, Maiduguri and Mubi - South which can be attributed to the relative high outdoor tem peratures and low relative humidity. Apart from Enugu, direct evaporative coolers are recommended in these areas and in areas with similar climatic characteristics. Keywords: Predicted percentage dissatisfied, Evaporative cooling, Thermal comfort, Predic ted mean vot

Effect of micro-organism and particle size on fermentation of sorghum and maize for poultry feed

A study was conducted to investigate the effect of particle size and micro-organism on fermentation of sorghum and maize for poultry feed. Sorghum (Sorghum bicolour L. Moench) and maize were milled in a hammer mill and separated into coarse, medium, fine and very fine particles sizes with a stack of sieves of apertures 2.5 mm, 850 μm and 500 μm, from the first to the last sieve and ending in a pan with the very fine particles. Samples were weighed into 100 g sachets and irradiated using 60Co at 25 kGy γ-radiation. Grains were fermented with sterile distilled water for 24 h at a ratio of 1 feed:1.4 water and inoculated with 0.01 ml of an overnight culture of De Man, Rogosa and Sharpe (MRS) broth containing Pediococcus acidilactici (PA1) or Lactobacillus plantarum (SLP) (ca 109 cfu/ml). The medium was incubated at 30°C simultaneously with a control treatment without lactic acid bacteria (LAB). Subsamples were collected aseptically at the beginning of the fermentation (0 h) and at 4, 8, 24 h after fermentation for pH, sugar and organic acids analysis. Significant reductions in the pH of maize and sorghum for LAB treatments (PA1 and SLP) were evident after 8 hours of fermentation. Twenty four hour lactic acid concentrations from coarse particle size fermentations were not significantly different from concentrations in the medium and fine particle size fermentations. The choice of LAB did not affect the concentration of lactic acid for any particle size. However, acetic acid production from fermentation with PA1 was significantly higher (P<0.01) than the concentration obtained with SLP. Results suggest that moderate grain processing may be enough to permit production of biosafe levels of lactic acid in fermented feed for poultry birds.Keywords: Fermentation, lactic acid bacteria, maize, particle size, sorghum African Journal of Biotechnology Vol. 12(26), pp. 4147-415

Data on microhardness and structural analysis of friction stir spot welded lap joints of AA5083-H116

Friction stir spot welding (FSSW) was established to compete reasonably with the reverting, bolting, adhesive bonding as well as resistance spot welding (RSW) which have been used in the past for lap joining in automobile, aerospace, marine, railways, defence and shipbuilding industries. The use of these ancient and conventional joining techniques had led to increasing material cost, installation labour, and additional weight in the aircraft, shipbuilding, and other areas of applications. All these are disadvantages that can be overcome using FSSW. This research work carried out friction stir spot welding on 5058-H116 aluminium alloy by employing rotational speed in the step of 300 rpm ranges from 600 rpm to 1200 rpm with a no travel speed. It was noted that the dwell times were in the step of 5 s varying from 5 s to 15 s while the tool plunge rate was maintained at 30 mm/min. In this dataset, a cylindrical tapered rotating H13 Hot-working steel tool was used with a probe length of 5 mm and probe diameter of 6 mm, it has a shoulder diameter of 18 mm. The tool penetration depth (plunge) was maintained at 0.2 mm and the tool tilt angle at 2°. Structural integrity was car-ried out using Rigaku ultima IV multifunctional X-ray diffractometer (XRD) with a scan voltage of 40 kV and scan current of 30 mA. This was used to determine crystallite sizes, peak intensity, d-spacing, full width at half maximum intensity (FWHM) of the diffraction peak. TH713 digital microhardness equipment with diamond indenter was used for microhardness data acquisition following ASTM E92–82 standard test. The average Vickers hardness data values at different zones of the spot-welds were captured and presented

Data on microhardness and structural analysis of friction stir spot welded lap joints of AA5083-H116

Friction stir spot welding (FSSW) was established to compete reasonably with the reverting, bolting, adhesive bonding as well as resistance spot welding (RSW) which have been used in the past for lap joining in automobile, aerospace, marine, railways, defence and shipbuilding industries. The use of these ancient and conventional joining techniques had led to increasing material cost, installation labour, and additional weight in the aircraft, shipbuilding, and other areas of applications. All these are disadvantages that can be overcome using FSSW. This research work carried out friction stir spot welding on 5058-H116 aluminium alloy by employing rotational speed in the step of 300 rpm ranges from 600 rpm to 1200 rpm with a no travel speed. It was noted that the dwell times were in the step of 5 s varying from 5 s to 15 s while the tool plunge rate was maintained at 30 mm/min. In this dataset, a cylindrical tapered rotating H13 Hot-working steel tool was used with a probe length of 5 mm and probe diameter of 6 mm, it has a shoulder diameter of 18 mm. The tool penetration depth (plunge) was maintained at 0.2 mm and the tool tilt angle at 2°. Structural integrity was car-ried out using Rigaku ultima IV multifunctional X-ray diffractometer (XRD) with a scan voltage of 40 kV and scan current of 30 mA. This was used to determine crystallite sizes, peak intensity, d-spacing, full width at half maximum intensity (FWHM) of the diffraction peak. TH713 digital microhardness equipment with diamond indenter was used for microhardness data acquisition following ASTM E92–82 standard test. The average Vickers hardness data values at different zones of the spot-welds were captured and presented

Insecticidal Activity of Crude Extracts of Hyptis suaveolens (Bush Mint) on Anopheles Mosquitoes Collected from Lafia, Nasarawa State, Nigeria

Anopheles gambiae is a vector that is responsible for the transmission of malaria parasites which causes high morbidity and mortality in Nigeria and the world at large. Human-vector contact can be reduced by the use of conventional repellents being sold in the market, though some of these repellent are not environmentally friendly and An. gambiae have developed resistance to some of these repellents. To this end, the phytochemical constituents and insecticidal activity of crude extracts of Hyptis suaveolens (bush mint) was determined on adult An. gambiae mosquitoes collected from Lafia, Nasarawa State, Nigeria to evaluate its effect in controlling them. Here, 70% ethanolic and diethyl ether fat crude extracts were made from H. suaveolens dried leaves and used to carry out the experiment. The phytochemical screening of the ethanol extract revealed the presence of alkaloids, flavonoid, saponins, tannins, steroids and reducing sugar. Glycoside was not detected in the ethanol extract. Only steroids was detected in diethyl ether extract the rest of the phytochemical tested were absent. An. gambiae larvae were collected from the field and were raised to F1 progeny adults that were used for the study. WHO protocol for carrying out human bait repellency cage test was used. Human hand treated with the extracts was exposed to a cage containing 30 female mosquitoes for each of the extracts respectively. The ethanolic crude extract treatment proved to be more effective in repelling mosquitoes with 0% (0/30) mosquito landing than diethyl ether extract which had 40% (12/30) mosquitoes landing and the control hand (untreated left hand) had the highest landing rate 63.3% (19/30) which showed very high significant difference (χ2 = 27.2619, df = 2, P <0.00001) in relation to the treatments. After 24 hours holding period, the mortality rate of exposed mosquitoes was observed to be highest in the ethanolic treatment 73.3% (22/30). In conclusion, H. suaveolens extracts have repellency potential in controlling adult An. gambiae

Anti-trypanosomal Activity of Bufonidae (Toad) Venom Crude Extract on Trypanosoma brucei brucei in Swiss Mice

Trypanosomiasis afflicts about 6 ~ 7 million people globally and to a large extent impedes livestock production in Africa. Naturally, trypanosomal parasites undergo genetic mutation and have developed resistance over a wide range of therapies. The utilization of animals and plants products has presented therapeutic potential for identifying novel anti-trypanosomal drugs. This study evaluated toad venom for anti-trypanosomal potency invivo in Swiss mice. Toads were collected from July to August 2019. The acute oral toxicity and biochemical characterization of the toad venom were determined. The experimental mice were administered various doses (130 mg/kg, 173 mg/kg and 217 mg/kg) of the toad venom crude extract and 0.75 mg/mL of Diamizan Plus standard drug for the treatment of trypanosomiasis, once daily for 3 days. The in-vivo anti-trypanosomal activity was evaluated by a curative test, after infecting the mice with Trypanosoma brucei brucei. The pre-patent period was 72 hours before treatment commenced. The overall results showed that trypanosomal load was highest in the control group while the group treated with Diamizan drug had the least trypanosomal load. As such, the mean trypanosomal load in relation to treatments showed a very high significant difference (P0.05) across treatment groups. The over 50% reduction in the trypanosomal load in the 130 mg/kg group in comparison with the control group brings to bare the anti-trypanosomal potency of the toad venom. The anti-trypanosomal activity demonstrated by the toad venom has provided basis for development of new therapeutic agents from different toad species. The study recommends further studies (both in-vivo and invitro) followed by the characterization of the active compounds present in the toad venom responsible for the anti-tyrpanosomal activity observed alongside the management and conservation of these species

Anxiety, Anger and Depression Amongst Low-Income Earners in Southwestern Uganda During the COVID-19 Total Lockdown

Background: Low-income earners are particularly vulnerable to mental health, consequence of the coronavirus disease 2019 (COVID-19) lockdown restrictions, due to a temporary or permanent loss of income and livelihood, coupled with government-enforced measures of social distancing. This study evaluates the mental health status among low-income earners in southwestern Uganda during the first total COVID-19 lockdown in Uganda. Methods: A cross-sectional descriptive study was undertaken amongst earners whose income falls below the poverty threshold. Two hundred and fifty-three (n = 253) male and female low-income earners between the ages of 18 and 60 years of age were recruited to the study. Modified generalized anxiety disorder (GAD-7), Spielberger's State-Trait Anger Expression Inventory-2 (STAXI-2), and Beck Depression Inventory (BDI) tools as appropriate were used to assess anxiety, anger, and depression respectively among our respondents. Results: Severe anxiety (68.8%) followed by moderate depression (60.5%) and moderate anger (56.9%) were the most common mental health challenges experienced by low-income earners in Bushenyi district. Awareness of mental healthcare increased with the age of respondents in both males and females. A linear relationship was observed with age and depression (r = 0.154, P = 0.014) while positive correlations were observed between anxiety and anger (r = 0.254, P < 0.001); anxiety and depression (r = 0.153, P = 0.015) and anger and depression (r = 0.153, P = 0.015). Conclusion: The study shows the importance of mental health awareness in low resource settings during the current COVID-19 pandemic. Females were identified as persons at risk to mental depression, while anger was highest amongst young males