7 research outputs found
The I-Imas project: End-Users driven specifications for the design of a novel digital medical imaging system
The I-Imas (Intelligent Imaging Sensors) is an EU project whose objective is to design and develop intelligent imaging sensors and evaluate their use within an adaptive medical imaging system specifically tailored to Mammography and Dental Radiology. The system will employ an in line scanning technology approach and proposes the use of CMOS active pixels sensors. The I-Imas sensor will have the capability of processing the data on every pixel and be able to dynamically respond in real time to changing conditions during imaging recording. The result will be to minimise the radiation exposure to areas of low diagnostic information content while extracting the highest diagnostic information from region of high interest. The first phase of the I-Imas project deals with the characterisation of the key features in a medical image that carry the highest content of diagnostic information. With this objective in mind an End-Users Survey has been carried out. We have been distributed a questionnaire to experts in the field of mammography and dental radiology (the dental radiology results will be presented elsewhere): medical physicists, radiologists, radiographers and dentists. From this survey we have collected information about the most useful specifications to be implemented in the I-Imas imaging system. This paper discusses the results from the End-Users survey and considers design implications for the I-Imas sensors. © 2004 IEEE
Radiation tolerance of single sided silicon microstrips
The RD20 collaboration is investigating the design and operation of an LHC inner tracking detector based on silicon microstrips. Measurements have been made on prototype detectors after irradiation with electrons, neutrons, photons, and protons for doses up to 5 Mrad and fluences up to 10(15) particles/cm(2). The annealing of effective doping changes caused by high neutron fluences, one of the major limits to detector lifetime at the LHC, is shown to be strongly inhibited by cooling below room temperature. Detailed results are presented on the critical issue of microstrip capacitance. We have also investigated bulk damage caused by high-energy protons, interstrip isolation after neutron irradiation, and MOS capacitors irradiated with electrons and photons
Development of high resolution silicon strip detectors for experiments at high luminosity at LHC: Status report to the DRDC
Radiation hard silicon detectors - developments by the RD48 (ROSE)collaboration
The RD48 (ROSE) collaboration has succeeded to develop radiation hard silicon detectors. capable to withstand the harsh hadron fluences in the tracking areas of LHC experiments. In order to reach this objective, a defect engineering technique was employed resulting in the development of Oxygen enriched FZ silicon (DOFZ), ensuring the necessary O-enrichment of about 2 x 10(17) O/cm(3) in the normal detector processing. Systematic investigations have been carried out on various standard and oxygenated silicon diodes with neutron, proton and pion irradiation up to a fluence of 5 x 10(14)cm(-2) (1 MeV neutron equivalent). Major focus is on the changes of the effective doping concentration (depletion voltage). Other aspects (reverse current, charge collection) are covered too and the appreciable benefits obtained with DOFZ silicon in radiation tolerance for charged hadrons are outlined. The results are reliably described by the "Hamburg model": its application to LHC experimental conditions is shown, demonstrating the superiority of the defect engineered silicon. Microscopic aspects of damage effects are also discussed. including differences due to charged and neutral hadron irradiation. (C) 2001 Elsevier Science B.V. All rights reserved
Development of radiation tolerant semiconductor detectors for the Super-LHC.
The envisaged upgrade of the Large Hadron Collider (LHC) at CERN towards the Super-LHC (SLHC) with a 10 times increased luminosity of 1035 cm−2 s−1 will present severe challenges for the tracking detectors of the SLHC experiments. Unprecedented high radiation levels and track densities and a reduced bunch crossing time in the order of 10 ns as well as the need for cost effective detectors have called for an intensive R&D program. The CERN RD50 collaboration “Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders” is working on the development of semiconductor sensors matching the requirements of the SLHC. Sensors based on defect engineered silicon like Czochralski, epitaxial and oxygen enriched silicon have been developed. With 3D, Semi-3D and thin detectors new detector concepts have been evaluated and a study on the use of standard and oxygen enriched p-type silicon detectors revealed a promising approach for radiation tolerant cost effective devices. These and other most recent advancements of the RD50 collaboration are presented
Recent advancements in the development of radiation hard semiconductor detectors for S-LHC
The proposed luminosity upgrade of the Large Hadron Collider (S-LHC) at CERN will demand the innermost layers of the vertex detectors to sustain fluences of about 1016 hadrons/cm2. Due to the high multiplicity of tracks, the required spatial resolution and the extremely harsh radiation field new detector concepts and semiconductor materials have to be explored for a possible solution of this challenge. The CERN RD50 collaboration "Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders" has started in 2002 an R&D program for the development of detector technologies that will fulfill the requirements of the S-LHC. Different strategies are followed by RD50 to improve the radiation tolerance. These include the development of defect engineered silicon like Czochralski, epitaxial and oxygen-enriched silicon and of other semiconductor materials like SiC and GaN as well as extensive studies of the microscopic defects responsible for the degradation of irradiated sensors. Further, with 3D, Semi-3D and thin devices new detector concepts have been evaluated. These and other recent advancements of the RD50 collaboration are presented and discussed. © 2005 Elsevier B.V. All rights reserved
Radiation-hard semiconductor detectors for SuperLHC.
An option of increasing the luminosity of the Large Hadron Collider (LHC) at CERN to 1035 cm−2 s−1 has been envisaged to extend the physics reach of the machine. An efficient tracking down to a few centimetres from the interaction point will be required to exploit the physics potential of the upgraded LHC. As a consequence, the semiconductor detectors close to the interaction region will receive severe doses of fast hadron irradiation and the inner tracker detectors will need to survive fast hadron fluences of up to above 1016 cm−2. The CERN-RD50 project “Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders” has been established in 2002 to explore detector materials and technologies that will allow to operate devices up to, or beyond, this limit. The strategies followed by RD50 to enhance the radiation tolerance include the development of new or defect engineered detector materials (SiC, GaN, Czochralski and epitaxial silicon, oxygen enriched Float Zone silicon), the improvement of present detector designs and the understanding of the microscopic defects causing the degradation of the irradiated detectors. The latest advancements within the RD50 collaboration on radiation hard semiconductor detectors will be reviewed and discussed in this work