Development of processing procedures for advanced silicon solar cells

Ten ohm-cm silicon solar cells, 0.2 mm thick, were produced with short circuit current efficiencies up to thirteen percent and using a combination of recent technical advances. The cells were fabricated in conventional and wraparound contact configurations. Improvement in cell collection efficiency from both the short and long wavelengths region of the solar spectrum was obtained by coupling a shallow junction and an optically transparent antireflection coating with back surface field technology. Both boron diffusion and aluminum alloying techniques were evaluated for forming back surface field cells. The latter method is less complicated and is compatible with wraparound cell processing

Design and fabrication of wraparound contact silicon solar cells

Both dielectric insulation and etched junction contact techniques were evaluated for use in wraparound contact cell fabrication. Since a suitable process for depositing the dielectrics was not achieved, the latter approach was taken. The relationship between loss of back contact and power degradation due to increased series resistance was established and used to design a simple contact configuration for 10 ohm-cm etched wraparound junction contact N/P cells. A slightly deeper junction significantly improved cell curve shape and the associated loss of current was regained by using thinner contact grid fingers. One thousand cells with efficiencies greater than 10.5% were fabricated to demonstrate the process

Ds+→ϕρ+D_s^+ \to \phi \rho^+ Decay

Motivated by the experimental measurement of the decay rate, $\Gamma$, and the longitudinal polarization, $P_L$, in the Cabibbo favored decay $D_s^+\to \phi {\rho}^{+}$, we have studied theoretical prediction within the context of factorization approximation invoking several form factors models. We were able to obtain agreement with experiment for both $\Gamma$ and $P_L$ by using experimentally measured values of the form factors $A_1^{D_s\phi}(0)$, $A_2^{D_s\phi}(0)$ and $V^{D_s\phi}(0)$ in the semi-leptonic decay $D_s^+\to \phi l^{+}\nu_{l}$. We have also included in our calculation the effect of the final state interaction ($fsi$) by working with the partial waves amplitudes $S$, $P$ and $D$. Numerical calculation shows that the decay amplitude is dominated by $S$ wave, and that the polarization is sensitive to the interference between $S$ and $D$ waves. The range of the phase difference $\delta_{SD} = \delta_S - \delta_D$ accommodated by experimental error in $P_L$ is large.Comment: 7 pages, LaTe

Nonfactorization and the decays Ds+→ϕπ+,ϕρ+D_s^+ \to \phi \pi^+, \phi \rho^+ and ϕl+νl\phi l^+ \nu_l

In six chosen scenarios for the $q^2$ dependence of the form factors involved in $D_s^+ \rightarrow \phi$ transition, we have determined the allowed domain of $x = A_2(0) / A_1(0)$ and $y = V(0)/A_1(0)$ from the experimentally measured ratios $R_{sl} = \Gamma(D_s^+ \rightarrow \phi l^+ \nu_l)/\Gamma(D_s^+ \rightarrow \phi \pi^+)$ and $R_h = \Gamma(D_s^+ \rightarrow \phi \rho^+)/\Gamma(D_s^+ \rightarrow \phi \pi^+)$ in a scheme that uses the $N_c =3$ value of the phenomenological parameter $a_1$ and includes nonfactorized contribution. We find that the experimentally measured values of $x$ and $y$ from semileptonic decays of $D_s^+$ favor solutions which have significant nonfactorized contribution, and, in particular, $R_{sl}$ favors solutions in scenarios where $A_1(q^2)$ is either flat or decreasing with $q^2$.Comment: 15 pages, Latex, four figure (available on request)

Closed-circuit television welding- electrode guidance system

Closed-circuit TV camera is mounted parallel to electrode and moves along with it. Camera is scanned along seam so seam is viewed parallel with scan lines on TV monitor. Two fiber optics illuminators are attached to guidance system; they illuminate seam for TV camera

Virtual Data in CMS Analysis

The use of virtual data for enhancing the collaboration between large groups of scientists is explored in several ways: - by defining ``virtual'' parameter spaces which can be searched and shared in an organized way by a collaboration of scientists in the course of their analysis; - by providing a mechanism to log the provenance of results and the ability to trace them back to the various stages in the analysis of real or simulated data; - by creating ``check points'' in the course of an analysis to permit collaborators to explore their own analysis branches by refining selections, improving the signal to background ratio, varying the estimation of parameters, etc.; - by facilitating the audit of an analysis and the reproduction of its results by a different group, or in a peer review context. We describe a prototype for the analysis of data from the CMS experiment based on the virtual data system Chimera and the object-oriented data analysis framework ROOT. The Chimera system is used to chain together several steps in the analysis process including the Monte Carlo generation of data, the simulation of detector response, the reconstruction of physics objects and their subsequent analysis, histogramming and visualization using the ROOT framework.Comment: Talk from the 2003 Computing in High Energy and Nuclear Physics (CHEP03), La Jolla, Ca, USA, March 2003, 9 pages, LaTeX, 7 eps figures. PSN TUAT010. V2 - references adde

Effect of photoperiod and host distribution on the horizontal transmission of Isaria fumosorosea (Hypocreales: Cordycipitaceae) in greenhouse whitefly assessed using a novel model bioassay

A model bioassay was used to evaluate the epizootic potential and determine the horizontal transmission efficiency of Isaria fumosorosea Trinidadian strains against Trialeurodes vaporariorum pharate adults under optimum conditions (25±0.5°C, ~100% RH) at two different photoperiods. Untreated pharate adults were arranged on laminated graph paper at different distributions to simulate varying infestation levels on a leaf surface. Four potential hosts were located 7, 14 and 21 mm away from a central sporulating cadaver simulating high, medium and low infestation levels, respectively. Percent hosts colonized were recorded 7, 12, 14 and 21 days post-treatment during a 16- and 24-h photophase. After 21 days, mean percent hosts colonized at the highest, middle and lowest infestation levels were 93 and 100%, 22 and 58%, 25 and 39% under a 16- and 24-h photophase, respectively. From the results, it was concluded that the longer the photophase, the greater the percentage of hosts colonized, and as host distance increased from the central sporulating cadaver, colonization decreased. The use of this novel model bioassay technique is the first attempt to evaluate the epizootic potential and determine the horizontal transmission efficiency of I. fumosorosea Trinidadian strains under optimal environmental conditions at different photoperiods. This bioassay can be used to assess horizontal transmission efficiency for the selection of fungi being considered for commercial biopesticide development

Where are all the gravastars? Limits upon the gravastar model from accreting black holes

The gravastar model, which postulates a strongly correlated thin shell of anisotropic matter surrounding a region of anti-de Sitter space, has been proposed as an alternative to black holes. We discuss constraints that present-day observations of well-known black hole candidates place on this model. We focus upon two black hole candidates known to have extraordinarily low luminosities: the supermassive black hole in the Galactic Center, Sagittarius A*, and the stellar-mass black hole, XTE J1118+480. We find that the length scale for modifications of the type discussed in Chapline et al. (2003) must be sub-Planckian.Comment: 11 pages, 4 figure