43 research outputs found
Strain and composition dependence of the orbital polarization in nickelate superlattices
A combined analysis of x-ray absorption and resonant reflectivity data was
used to obtain the orbital polarization profiles of superlattices composed of
four-unit-cell-thick layers of metallic LaNiO3 and layers of insulating RXO3
(R=La, Gd, Dy and X=Al, Ga, Sc), grown on substrates that impose either
compressive or tensile strain. This superlattice geometry allowed us to partly
separate the influence of epitaxial strain from interfacial effects controlled
by the chemical composition of the insulating blocking layers. Our quantitative
analysis reveal orbital polarizations up to 25%. We further show that strain is
the most effective control parameter, whereas the influence of the chemical
composition of the blocking layers is comparatively small.Comment: 9 pages, 8 figure
Element-Specific Depth Profile of Magnetism and Stoichiometry at the La0.67Sr0.33MnO3/BiFeO3 Interface
Depth-sensitive magnetic, structural and chemical characterization is
important in the understanding and optimization of novel physical phenomena
emerging at interfaces of transition metal oxide heterostructures. In a
simultaneous approach we have used polarized neutron and resonant X-ray
reflectometry to determine the magnetic profile across atomically sharp
interfaces of ferromagnetic La0.67Sr0.33MnO3 / multiferroic BiFeO3 bi-layers
with sub-nanometer resolution. In particular, the X-ray resonant magnetic
reflectivity measurements at the Fe and Mn resonance edges allowed us to
determine the element specific depth profile of the ferromagnetic moments in
both the La0.67Sr0.33MnO3 and BiFeO3 layers. Our measurements indicate a
magnetically diluted interface layer within the La0.67Sr0.33MnO3 layer, in
contrast to previous observations on inversely deposited layers. Additional
resonant X-ray reflection measurements indicate a region of an altered Mn- and
O-content at the interface, with a thickness matching that of the magnetic
diluted layer, as origin of the reduction of the magnetic moment.Comment: 13 pages, 4 figures, supplemental material include
Key Features Relevant to Select Antigens and TCR From the MHC-Mismatched Repertoire to Treat Cancer
Adoptive transfer of T cells transgenic for tumor-reactive T-cell receptors (TCR) is an attractive immunotherapeutic approach. However, clinical translation is so far limited due to challenges in the identification of suitable target antigens as well as TCRs that are concurrent safe and efficient. Definition of key characteristics relevant for effective and specific tumor rejection is essential to improve current TCR-based adoptive T-cell immunotherapies. We here characterized in-depth two TCRs derived from the human leukocyte antigen (HLA)-mismatched allogeneic repertoire targeting two different myeloperoxidase (MPO)-derived peptides presented by the same HLA-restriction element side by side comprising state of the art biochemical and cellular in vitro, in vivo, and in silico experiments. In vitro experiments reveal comparable functional avidities, off-rates, and cytotoxic activities for both TCRs. However, we observed differences especially with respect to cytokine secretion and cross-reactivity as well as in vivo activity. Biochemical and in silico analyses demonstrate different binding qualities of MPO-peptides to the HLA-complex determining TCR qualities. We conclude from our biochemical and in silico analyses of peptide-HLA-binding that rigid and high-affinity binding of peptides is one of the most important factors for isolation of TCRs with high specificity and tumor rejection capacity from the MHC-mismatched repertoire. Based on our results, we developed a workflow for selection of such TCRs with high potency and safety profile suitable for clinical translation
The temperature-dependent magnetization profile across an epitaxial bilayer of ferromagnetic La2/3Ca1/3MnO3 and superconducting YBa2Cu3O7-d
Epitaxial bilayers of ferromagnetic La2/3Ca1/3MnO3 (LCMO) and superconducting
YBa2Cu3O7-d (YBCO) have been grown on single-crystalline SrTiO3 (STO)
substrates by pulsed laser deposition. The Manganese magnetization profile
across the FM layer has been determined with high spatial resolution at low
temperatures by X-ray resonant magnetic reflectivity (XRMR). It is found that
not only the adjacent superconductor but also the substrate underneath
influences the magnetization of the LCMO film at the interfaces at low
temperatures. Both effects can be investigated individually by XRMR
The next generation neutrino telescope: IceCube-Gen2
The IceCube Neutrino Observatory, a cubic-kilometer-scale neutrino detector at the geographic South Pole, has reached a number of milestones in the field of neutrino astrophysics: the discovery of a high-energy astrophysical neutrino flux, the temporal and directional correlation of neutrinos with a flaring blazar, and a steady emission of neutrinos from the direction of an active galaxy of a Seyfert II type and the Milky Way. The next generation neutrino telescope, IceCube-Gen2, currently under development, will consist of three essential components: an array of about 10,000 optical sensors, embedded within approximately 8 cubic kilometers of ice, for detecting neutrinos with energies of TeV and above, with a sensitivity five times greater than that of IceCube; a surface array with scintillation panels and radio antennas targeting air showers; and buried radio antennas distributed over an area of more than 400 square kilometers to significantly enhance the sensitivity of detecting neutrino sources beyond EeV. This contribution describes the design and status of IceCube-Gen2 and discusses the expected sensitivity from the simulations of the optical, surface, and radio components
Sensitivity of IceCube-Gen2 to measure flavor composition of Astrophysical neutrinos
The observation of an astrophysical neutrino flux in IceCube and its detection capability to separate between the different neutrino flavors has led IceCube to constraint the flavor content of this flux. IceCube-Gen2 is the planned extension of the current IceCube detector, which will be about 8 times larger than the current instrumented volume. In this work, we study the sensitivity of IceCube-Gen2 to the astrophysical neutrino flavor composition and investigate its tau neutrino identification capabilities. We apply the IceCube analysis on a simulated IceCube-Gen2 dataset that mimics the High Energy Starting Event (HESE) classification. Reconstructions are performed using sensors that have 3 times higher quantum efficiency and isotropic angular acceptance compared to the current IceCube optical modules. We present the projected sensitivity for 10 years of data on constraining the flavor ratio of the astrophysical neutrino flux at Earth by IceCube-Gen2
Mechanical design of the optical modules intended for IceCube-Gen2
IceCube-Gen2 is an expansion of the IceCube neutrino observatory at the South Pole that aims to increase the sensitivity to high-energy neutrinos by an order of magnitude. To this end, about 10,000 new optical modules will be installed, instrumenting a fiducial volume of about 8 km3. Two newly developed optical module types increase IceCube’s current sensitivity per module by a factor of three by integrating 16 and 18 newly developed four-inch PMTs in specially designed 12.5-inch diameter pressure vessels. Both designs use conical silicone gel pads to optically couple the PMTs to the pressure vessel to increase photon collection efficiency. The outside portion of gel pads are pre-cast onto each PMT prior to integration, while the interiors are filled and cast after the PMT assemblies are installed in the pressure vessel via a pushing mechanism. This paper presents both the mechanical design, as well as the performance of prototype modules at high pressure (70 MPa) and low temperature (−40∘C), characteristic of the environment inside the South Pole ice
Sensitivity of the IceCube-Gen2 Surface Array for Cosmic-Ray Anisotropy Studies
The energy of the transition from Galactic to extra-galactic origin of cosmic rays is one of
the major unresolved issues of cosmic-ray physics. However, strong constraints can be obtained
from studying the anisotropy in the arrival directions of cosmic rays. The sensitivity to cosmic-ray anisotropy is, in particular, a matter of statistics. Recently, the cosmic ray anisotropy measurements in the TeV to PeV energy range were updated from IceCube using 11 years of data. The IceCube-Gen2 surface array will cover an area about 8 times larger than the existing IceTop surface array with a corresponding increase in statistics and capability to investigate cosmic-ray anisotropy with higher sensitivity. In this contribution, we present details on the performed simulation studies and sensitivity to the cosmic-ray anisotropy signal for the IceCube-Gen2 surface array
Estimating the coincidence rate between the optical and radio array of IceCube-Gen2
The IceCube-Gen2 Neutrino Observatory is proposed to extend the all-flavour energy range of IceCube beyond PeV energies. It will comprise two key components: I) An enlarged 8km3 in-ice optical Cherenkov array to measure the continuation of the IceCube astrophysical neutrino flux and improve IceCube\u27s point source sensitivity above ∼100TeV; and II) A very large in-ice radio array with a surface area of about 500km2. Radio waves propagate through ice with a kilometer-long attenuation length, hence a sparse radio array allows us to instrument a huge volume of ice to achieve a sufficient sensitivity to detect neutrinos with energies above tens of PeV.
The different signal topologies for neutrino-induced events measured by the optical and in-ice radio detector - the radio detector is mostly sensitive to the cascades produced in the neutrino interaction, while the optical detector can detect long-ranging muon and tau leptons with high accuracy - yield highly complementary information. When detected in coincidence, these signals will allow us to reconstruct the neutrino energy and arrival direction with high fidelity. Furthermore, if events are detected in coincidence with a sufficient rate, they resemble the unique opportunity to study systematic uncertainties and to cross-calibrate both detector components
Direction reconstruction performance for IceCube-Gen2 Radio
The IceCube-Gen2 facility will extend the energy range of IceCube to ultra-high energies. The key component to detect neutrinos with energies above 10 PeV is a large array of in-ice radio detectors. In previous work, direction reconstruction algorithms using the forward-folding technique have been developed for both shallow (≲20 m) and deep in-ice detectors, and have also been successfully used to reconstruct cosmic rays with ARIANNA. Here, we focus on the reconstruction algorithm for the deep in-ice detector, which was recently introduced in the context of the Radio Neutrino Observatory in Greenland (RNO-G)