Non-Contact bridge deflection measurement : application of laser Technology

Structural deflections represent a critical response parameter often measured for structural health monitoring. Traditional measurement sensor technologies such as DCDTs, LVDTs, etc., require attaching the device between the point of measurement and a reference point. Generally, this requires connecting the sensor to the ground or a temporary structure such as scaffolding. Use of the traditional sensors for highway bridge deflection measurement poses many challenges as most of them are over either a road or a waterway. Because of these challenges, they are not often used and deflection is calculated either from indirect data such as girder end rotation or the structural parameters that contribute to deflection which is derived from measurements such as strain and curvature. Strictly speaking, measured displacements provide the best means for understanding structural behavior. Aiming at addressing the challenges of direct measurements of bridge deflections, this article will address the capabilities of two state-of-the-art non-contact measurement technologies. These technologies are: Laser Tracker and Laser Scanner. Laser Tracker records position coordinates at few discrete points while the laser scanner captures point clouds representing deformed and undeformed shapes of a structure. These two remote technologies present distinctive advantages, capabilities, limitations, and several challenges for field applications. The article will present a case study where laser tracker and laser scanner was collaboratively used to measure the deflection of a highway bridge under static truck loads. Further, the capabilities, limitations, and several challenges for field applications of these technologies will be summarized

Integrated approach for coastal hazards and risks in Sri Lanka

The devastating impact of the tsunami of 26 December 2004 on the shores of the Indian Ocean recalled the importance of knowledge and the taking into account of coastal hazards. Sri Lanka was one of the countries most affected by this tsunami (e.g. 30 000 dead, 1 million people homeless and 70% of the fishing fleet destroyed). Following this tsunami, as part of the French post-tsunami aid, a project to establish a Geographical Information System (GIS) on coastal hazards and risks was funded. This project aims to define, at a pilot site, a methodology for multiple coastal hazards assessment that might be useful for the post-tsunami reconstruction and for development planning. This methodology could be applied to the whole coastline of Sri Lanka. <br><br> The multi-hazard approach deals with very different coastal processes in terms of dynamics as well as in terms of return period. The first elements of this study are presented here. We used a set of tools integrating a GIS, numerical simulations and risk scenario modelling. While this action occurred in response to the crisis caused by the tsunami, it was decided to integrate other coastal hazards into the study. Although less dramatic than the tsunami these remain responsible for loss of life and damage. Furthermore, the establishment of such a system could not ignore the longer-term effects of climate change on coastal hazards in Sri Lanka. <br><br> This GIS integrates the physical and demographic data available in Sri Lanka that is useful for assessing the coastal hazards and risks. In addition, these data have been used in numerical modelling of the waves generated during periods of monsoon as well as for the December 2004 tsunami. Risk scenarios have also been assessed for test areas and validated by field data acquired during the project. The results obtained from the models can be further integrated into the GIS and contribute to its enrichment and to help in better assessment and mitigation of these risks. <br><br> The coastal-hazards-and-risks GIS coupled with modelling thus appears to be a very useful tool that can constitute the skeleton of a coastal zone management system. Decision makers will be able to make informed choices with regards to hazards during reconstruction and urban planning projects

Observation of Ground-State Two-Neutron Decay

Neutron decay spectroscopy has become a successful tool to explore nuclear properties of nuclei with the largest neutron-to-proton ratios. Resonances in nuclei located beyond the neutron dripline are accessible by kinematic reconstruction of the decay products. The development of two-neutron detection capabilities of the Modular Neutron Array (MoNA) at NSCL has opened up the possibility to search for unbound nuclei which decay by the emission of two neutrons. Specifically this exotic decay mode was observed in 16Be and 26O.Comment: To be published in Acta Physica Polonica

Exploring the neutron dripline two neutrons at a time: The first observations of the 26O and 16Be ground state resonances

The two-neutron unbound ground state resonances of $^{26}$O and $^{16}$Be were populated using one-proton knockout reactions from $^{27}$F and $^{17}$B beams. A coincidence measurement of 3-body system (fragment + n + n) allowed for the decay energy of the unbound nuclei to be reconstructed. A low energy resonance, $<$ 200 keV, was observed for the first time in the $^{24}$O + n + n system and assigned to the ground state of $^{26}$O. The $^{16}$Be ground state resonance was observed at 1.35 MeV. The 3-body correlations of the $^{14}$Be + n + n system were compared to simulations of a phase-space, sequential, and dineutron decay. The strong correlations in the n-n system from the experimental data could only be reproduced by the dineutron decay simulation providing the first evidence for a dineutron-like decay.Comment: Invited Talk given at the 11th International Conference on Nucleus-Nucleus Collisions (NN2012), San Antonio, Texas, USA, May 27-June 1, 2012. To appear in the NN2012 Proceedings in Journal of Physics: Conference Series (JPCS

A genome-wide identification and comparative analysis of the lentil MLO genes

Revista electrónica on linePowdery mildew is a widespread fungal plant disease that can cause significant losses in many crops. Some MLO genes (Mildew resistance locus O) have proved to confer a durable resistance to powdery mildew in several species. Resistance granted by the MLO gene family members has prompted an increasing interest in characterizing these genes and implementing their use in plant breeding. Lentil (Lens culinaris Medik.) is a widely grown food legume almost exclusively consumed as dry seed with an average world production of 4.5 million tons. Powdery mildew causes severe losses on certain lentil cultivars under particular environmental conditions. Data mining of the lentil CDC Redberry draft genome allowed to identify up to 15 gene sequences with homology to known MLO genes, designated as LcMLOs. Further characterization of these gene sequences and their deduced protein sequences demonstrated conformity with key MLO protein characteristics such as the presence of transmembrane and calmodulin binding domains, as well as that of other conserved motifs. Phylogenetic and other comparative analyses revealed that LcMLO1 and LcMLO3 are the most likely gene orthologs related to powdery mildew response in other species, sharing a high similarity with other known resistance genes of dicot species, such as pea PsMLO1 and Medicago truncatula MtMLO1 and MtMLO3. Sets of primers were designed as tools to PCR amplify the genomic sequences of LcMLO1 and LcMLO3, also to screen lentil germplasm in search of resistance mutants. Primers were used to obtain the complete sequences of these two genes in all of the six wild lentil relatives. Respective to each gene, all Lens sequences shared a high similarity. Likewise, we used these primers to screen a working collection of 58 cultivated and 23 wild lentil accessions in search of length polymorphisms present in these two genes. All these data widen the insights on this gene family and can be useful for breeding programs in lentil and close related species.S

Reviewing the literature on access to prompt and effective malaria treatment in Kenya: implications for meeting the Abuja targets

<p>Abstract</p> <p>Background</p> <p>Effective case management is central to reducing malaria mortality and morbidity worldwide, but only a minority of those affected by malaria, have access to prompt effective treatment.</p> <p>In Kenya, the Division of Malaria Control is committed to ensuring that 80 percent of childhood fevers are treated with effective anti-malarial medicines within 24 hours of fever onset, but this target is largely unmet. This review aimed to document evidence on access to effective malaria treatment in Kenya, identify factors that influence access, and make recommendations on how to improve prompt access to effective malaria treatment. Since treatment-seeking patterns for malaria are similar in many settings in sub-Saharan Africa, the findings presented in this review have important lessons for other malaria endemic countries.</p> <p>Methods</p> <p>Internet searches were conducted in PUBMED (MEDLINE) and HINARI databases using specific search terms and strategies. Grey literature was obtained by soliciting reports from individual researchers working in the treatment-seeking field, from websites of major organizations involved in malaria control and from international reports.</p> <p>Results</p> <p>The review indicated that malaria treatment-seeking occurs mostly in the informal sector; that most fevers are treated, but treatment is often ineffective. Irrational drug use was identified as a problem in most studies, but determinants of this behaviour were not documented. Availability of non-recommended medicines over-the-counter and the presence of substandard anti-malarials in the market are well documented. Demand side determinants of access include perception of illness causes, severity and timing of treatment, perceptions of treatment efficacy, simplicity of regimens and ability to pay. Supply side determinants include distance to health facilities, availability of medicines, prescribing and dispensing practices and quality of medicines. Policy level factors are around the complexity and unclear messages regarding drug policy changes.</p> <p>Conclusion</p> <p>Kenya, like many other African countries, is still far from achieving the Abuja targets. The government, with support from donors, should invest adequately in mechanisms that promote access to effective treatment. Such approaches should focus on factors influencing multiple dimensions of access and will require the cooperation of all stakeholders working in malaria control.</p

The Economic Benefits Resulting from the First 8 Years of the Global Programme to Eliminate Lymphatic Filariasis (2000–2007)

Lymphatic filariasis (LF), commonly known as ‘elephantiasis’, is one of the world's most debilitating infectious diseases. In 83 countries worldwide, more than 1.3 billion people are at risk of infection with an estimated 120 million individuals already infected. A recent publication reviewing the health impact of the first 8 years of the Global Programme to Eliminate Lymphatic Filariasis (GPELF) demonstrated the enormous health benefits achieved in populations receiving annual mass drug administration (MDA), as a result of infection prevented, disease progression halted, and ancillary treatment of co-infections. To date, however, no studies have estimated the economic value of these health benefits, either to the individuals or the societies afflicted with LF. Our study estimates that US$21.8 billion will be gained among individuals benefitting from just the first 8 years of the Global Programme, and an additional US$2.2 billion will be saved by the health systems of endemic countries. Treating endemic populations is possible at very low cost – particularly because of the generous drug donations from two pharmaceutical companies – but results in enormous economic benefits. Findings from this study yield a much clearer understanding the GPELF's full economic impact and strengthen the conviction that it is a ‘best buy’ in global health