Palladium and Bimetallic Palladium–Nickel Nanoparticles Supported on Multiwalled Carbon Nanotubes: Application to Carbon–Carbon Bond-Forming Reactions in Water

Palladium and bimetallic Pd–Ni nanoparticles (NPs) protected by polyvinylpyrrolidone were prepared by the reduction-by-solvent method and deposited on multiwalled carbon nanotubes (MWCNTs). The catalytic activity of these NPs to carbon–carbon bond-forming reactions was studied by using 0.1 mol % Pd loading, at 120 °C for 1 h and water as a solvent under ligand-free conditions. The Suzuki–Miyaura reaction took place quantitatively for the cross-coupling of 4-bromoanisole with phenylboronic acid, better than those obtained with potassium phenyltrifluoroborate, with Pd50Ni50/MWCNTs as a catalyst and K2CO3 as a base and TBAB as an additive, with good recyclability during 4 cycles with some Ni leaching. The Hiyama reaction of 4-iodoanisole with trimethoxyphenylsilane, under fluoride-free conditions using 50 % aqueous NaOH solution, was performed with Pd/MWCNTs as a catalyst in 83 % yield with low recyclability. For the Mizoroki-Heck reaction 4-iodoanisole and styrene gave the corresponding 4-methoxystilbene quantitatively with Pd50Ni50/MWCNTs using K2CO3 as a base and TBAB as an additive although the recycle failed. In the case of the Sonogashira-Hagihara reaction, Pd/MWCNTs had to be used as a catalyst and pyrrolidine as a base for the coupling of 4-iodoanisole with phenylacetylene under copper-free conditions. The corresponding 4-methoxytolane was quantitatively obtained allowing the recycling of the catalyst during 3 cycles.The Spanish Ministerios de Ciencia e Innovación (MICINN) and Economía y Competitividad (MINECO) (projects CTQ 2007-62771/BQU, CTQ2010-20387, CTQ2013-43446-P, Consolider Ingenio 2010, CSD2007-00006, CTQ2014-51912-REDC, CTQ2012-31762 and RyC-2009-03813 fellowship), FEDER, the Generalitat Valenciana (PROMETEO 2009/039, PROMETEOII/2014/010, and PROMETEOII/2014/017) and the University of Alicante are gratefully acknowledged for financial support

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support

Release Behavior of Benzimidazole-Intercalated α-Zirconium Phosphate as a Latent Thermal Initiator in the Reaction of Epoxy Resin

The intercalation compound of benzimidazole with α-zirconium phosphate (α-ZrP) was evaluated as a latent thermal initiator in the reaction of glycidyl phenyl ether (GPE) and hexahydro-4-methylphthalic anhydride (MHHPA). No reaction occurred at 60 °C after 1 h. Upon increasing the temperature to 140 °C, the conversion reached 97% after 1 h. The deintercalation ratio of Bim from the intercalation compound of benzimidazole with α-zirconium phosphate (α-ZrP·Bim) was measured in the reaction of the GPE-MHHPA system. The deintercalation ratio increased upon increasing the temperature, reaching 97% at 120 °C after 1 h. The storage stability at 25 °C and 40 °C in the reaction of GPE-MHHPA was tested and was found to be maintained for 14 days at 25 °C. The intercalation compound of α-ZrP·Bim can effectively serve as a latent thermal initiator in the reaction of GPE-MHHPA

Application of “Boomerang” Linear Polystyrene-Stabilized Pd Nanoparticles to a Series of C-C Coupling Reactions in Water

The application of a catch-and-release system for soluble Pd species between water (reaction medium) and polystyrene (polymer support) was examined in the Suzuki coupling reaction with 2-bromothiophene and the Heck reaction with styrene or bromobenzene. Although a slight increase in particle size was observed by TEM after re-stabilization of the Pd species on linear polystyrene, no agglomeration was observed

Imidazoles-Intercalated α-Zirconium Phosphate as Latent Thermal Initiators in the Reaction of Glycidyl Phenyl Ether (GPE) and Hexahydro-4-Methylphthalic Anhydride (MHHPA)

The capabilities of imidazoles-intercalated α-zirconium phosphate (α-ZrP·imidazole): imidazol (α-ZrP·Im), 2-methylimidazole (α-ZrP·2MIm), and 2-ethyl-4-methylimidazole (α-ZrP·2E4MIm) as latent thermal initiators were examined by the copolymerization of glycidyl phenyl ether (GPE) and hexahydro-4-methylphthalic anhydride (MHHPA) with the imidazoles-intercalated α-zirconium phosphate at varying temperatures for one-hour periods. Polymerization was not observed until the reactants were heated to 100 °C or above. Increasing the temperature, polymerization in the presence of α-ZrP·Im, α-ZrP·2MIm, or α-ZrP·2E4MIm proceeded at 140 °C for 1 h with over 90% conversion. The thermal stabilities of α-ZrP·Im, α-ZrP·2MIm, and α-ZrP·2E4MIm in the reaction at 40 °C for 264 h were tested. With α-ZrP·2MIm, the conversion was less than 15% up to 96 h. In the cases of α-ZrP·Im and α-ZrP·2E4MIm, the conversion reached less than 15% at 264 h. The thermal stabilities of α-ZrP·Im, α-ZrP·2MIm, and α-ZrP·2E4MIm at 40 °C were superior to those of the commercially available thermal latent initiators: HX-3088 and HX-3722