822 research outputs found

    The Li Overabundance of J37: Diffusion or Accretion?

    Full text link
    In September 2002 the discovery of a super Li-rich F-dwarf (J37) in NGC 6633, an iron poor analogue of the better studied Hyades and Praecepe open clusters, was announced. This unique star was thought to be the smoking gun for the action of diffusion, models of which predict a narrow "Li-peak" at approximately the correct temperature. However, with more detailed studies into J37s abundance pattern this star provides firm evidence for the accretion of planetesimals or other material from the circumstellar environment of new born stars. Thanks to the specific predictions made about the behaviour of Be abundances, (the most striking of which being no Be in super-Li-rich dwarfs subject to diffusion) the opposing diffusion/accretion predictions can be tested. Initial modelling of the Be line indicates that J37 is as Be rich as it is Li rich; log N(Be) = 2.25 +/- 0.25, and so is broadly consistent with an accretion-fuelled enhancement. However, that both Li and Be are enhanced by much more than the iron-peak elements (as determined in previous studies) suggests that diffusion also plays a role in increasing the abundances of Li and Be specifically. Furthermore, a new data set from the UVES/UT2 combination has allowed the elemental abundance of Iron to be measured, and the set of preliminary stellar parameters determined; Teff ~ 7340 K, log g ~ 4.1, microturbulence ~ 4.3 km/s, [Fe/H] ~ 0.50. This again provides distinct evidence for the effects of accretion in J37 and requires a new synthesis of the Be doublet.Comment: 5 pages, 2 figures. Poster presented at IAU Symposium 224 "The A Star Puzzle", 7-13 July 2004, Poprad, Slovaki

    Beryllium Enhancement as Evidence for Accretion in a Lithium-Rich F Dwarf

    Get PDF
    The early F dwarf star ``J37'' in the open cluster NGC6633 shows an unusual pattern of photospheric abundances, including an order of magnitude enhancement of lithium and iron-peak elements, but an under-abundance of carbon. As a consequence of its thin convection zone these anomalies have been attributed to either radiative diffusion or the accretion of hydrogen-depleted material. By comparing high resolution VLT/UVES spectra of J37 (and other F stars in NGC 6633) with syntheses of the Be ii doublet region at 3131 Ang, we establish that J37 also has a Be abundance (A(Be)=3.0+/-0.5) that is at least ten times the cosmic value. This contradicts radiative diffusion models that produce a Li over-abundance, as they also predict photospheric Be depletion. Instead, since Be is a highly refractory element, it supports the notion that J37 is the first clear example of a star that has accreted volatile-depleted material with a composition similar to chondritic meteorites, although some diffusion may be necessary to explain the low C and O abundances.Comment: Accepted for publication in MNRAS letters, 5 page

    Carbon Deficiency in Externally-Polluted White Dwarfs: Evidence for Accretion of Asteroids

    Full text link
    Existing determinations show that n(C)/n(Fe) is more than a factor of 10 below solar in the atmospheres of three white dwarfs that appear to be externally-polluted. These results are not easily explained if the stars have accreted interstellar matter, and we re-interpret these measurements as evidence that these stars have accreted asteroids of a chrondritic composition.Comment: 23 pages, 6 figures, accepted for Ap

    Formation of Structure in Snowfields: Penitentes, Suncups, and Dirt Cones

    Get PDF
    Penitentes and suncups are structures formed as snow melts, typically high in the mountains. When the snow is dirty, dirt cones and other structures can form instead. Building on previous field observations and experiments, this work presents a theory of ablation morphologies, and the role of surface dirt in determining the structures formed. The glaciological literature indicates that sunlight, heating from air, and dirt all play a role in the formation of structure on an ablating snow surface. The present work formulates a mathematical model for the formation of ablation morphologies as a function of measurable parameters. The dependence of ablation morphologies on weather conditions and initial dirt thickness are studied, focusing on the initial growth of perturbations away from a flat surface. We derive a single-parameter expression for the melting rate as a function of dirt thickness, which agrees well with a set of measurements by Driedger. An interesting result is the prediction of a dirt-induced travelling instability for a range of parameters.Comment: 28 pages, 13 figure

    Genomic analysis of Ugandan and Rwandan chicken ecotypes using a 600 k genotyping array

    Get PDF
    Background Indigenous populations of animals have developed unique adaptations to their local environments, which may include factors such as response to thermal stress, drought, pathogens and suboptimal nutrition. The survival and subsequent evolution within these local environments can be the result of both natural and artificial selection driving the acquisition of favorable traits, which over time leave genomic signatures in a population. This study’s goals are to characterize genomic diversity and identify selection signatures in chickens from equatorial Africa to identify genomic regions that may confer adaptive advantages of these ecotypes to their environments. Results Indigenous chickens from Uganda (n = 72) and Rwanda (n = 100), plus Kuroilers (n = 24, an Indian breed imported to Africa), were genotyped using the Axiom® 600 k Chicken Genotyping Array. Indigenous ecotypes were defined based upon location of sampling within Africa. The results revealed the presence of admixture among the Ugandan, Rwandan, and Kuroiler populations. Genes within runs of homozygosity consensus regions are linked to gene ontology (GO) terms related to lipid metabolism, immune functions and stress-mediated responses (FDR \u3c 0.15). The genes within regions of signatures of selection are enriched for GO terms related to health and oxidative stress processes. Key genes in these regions had anti-oxidant, apoptosis, and inflammation functions. Conclusions The study suggests that these populations have alleles under selective pressure from their environment, which may aid in adaptation to harsh environments. The correspondence in gene ontology terms connected to stress-mediated processes across the populations could be related to the similarity of environments or an artifact of the detected admixture

    Structure of 2,5-dimethyl-1,3,4,6-tetraazacycl[3.3.3]azine, C10H9N5

    Get PDF
    Orientador: Prof. Dr. Ramón Sigifredo Cortés ParedesCoorientadora: Profª. Drª. Maria Lúcia Leite Ribeiro OkimotoTese (doutorado) - Universidade Federal do Paraná, Setor de Tecnologia, Programa de Pós-Graduação em Engenharia Mecânica. Defesa : Curitiba, 20/02/2019Inclui referências: p. 202-219Área de concentração: ManufaturaResumo: A cor é um dos elementos mais importantes da vida humana, estando conscientes disso ou não. A cor está em tudo, desde a natureza, em todos os ambientes internos e externos, nos objetos circundantes, vestuários e, até mesmo, como forma de expressão verbal, ou seja, inimaginável a vida sem cor. No entanto, milhares de pessoas no mundo não têm acesso a esta informação. O presente trabalho refere-se ao desenvolvimento de código em relevo com o objetivo de possibilitar a identificação das cores às pessoas com deficiência visual por meio do tato. Esta abordagem científica e inovadora é composta de elementos em formato tridimensional, com dimensões mínimas, inspirado no elemento principal do Sistema Braille, o ponto. A abordagem metodológica partiu de revisão bibliográfica sobre o tema, investigação e avaliação criteriosa dos códigos de cores preexistentes e o desenvolvido de um sistema inovador, fundamentado na Teoria da Cor. Os códigos foram produzidos e experimentados em duas técnicas distintas: na técnica da Manufatura Aditiva (impressão em 3D) e na impressão em papel microcapsulado que produz relevos por meio de fusora térmica. Para a realização dos experimentos participaram 18 voluntários divididos em grupos de pessoas cegas, com baixa visão e com visão normal. Sendo nove mulheres e nove homens, com idades entre 25 a 64 anos. Os resultados da pesquisa evidenciaram que este sistema de código foi facilmente assimilado e memorizado pelos participantes com o tempo médio de 18,5 minutos para o ensino-aprendizado. A análise dos valores obtidos com o tempo médio de 14,08 segundos para o reconhecimento das cores através do código, comprovou que este sistema é eficaz e eficiente no que se propôs: o reconhecimento das cores pelo sentido do tato para promover inclusão e a acessibilidade da informação às pessoas com deficiência visual. Palavras-chave: Código de cor. Tecnologia Assistiva. Acessibilidade. Comunicação. Cegueira. Deficiência visual.Abstract: Color is one of the most important elements of human life, whether you are aware of it or not. The color is at all, from nature, in all internal and external environments, in the surrounding objects, garments and, even, as a form of verbal expression, unimaginable life without color. However, thousands of people in the world do not have access to this information. The present work refers to the development of code in relief with the objective of enabling the identification of the colors to people with visual impairment through tact. This scientific and innovative approach is composed of elements in three-dimensional format, with minimal dimensions, inspired by the main element of the Braille System, the point. The methodological approach was based on a bibliographic review of the theme, investigation and judicious evaluation of the pre-existing color codes and the development of an innovative system, grounded in the Color Theory. The codes were produced and tried in two distinct techniques: in the additive manufacturing technique (3D printing) and the microcapsulated paper printing that produces reliefs by means of thermal fuser. Eighteen volunteers were divided into groups of blind people, low vision and normal vision to perform the experiments. Nine women and nine men, aged between 25 and 64 years. The results of the research evidenced that this system of code was easily assimilated and memorized by the participants with an average time of 18,5 minutes for teaching/learning. The analysis of the values obtained with the average time of 14,08 seconds for the recognition of colors through the code, proved that this system is effective and efficient with has been proposed: the recognition of colors by the sense of touch to promote inclusion and accessibility information to visually impaired persons. Keywords: Color code. Assistive Technology. Accessibility. Communication. Blindness. Visual impairment.

    Direct and inverse measurement of thin films magnetostriction

    Full text link
    Two techniques of measurements of thin film magnetostriction are compared: direct, when changes of the substrate curvature caused by the film magnetization are controlled, and inverse ("indirect"), when the modification of the magnetic anisotropy induced by the substrate deformation (usually bending) is measured. We demonstrate how both the elastic strength of the substrate and the effective magneto-mechanical coupling between the substrate deformation and magnetic anisotropy of the film depend on different conditions of bending. Equations to be used for magnetostriction value determination in typical cases are given and critical parameters for the corresponding approximations are identified.Comment: 13 pages, 10 figures, 1 table, submitted to JMM

    Single nucleotide variant discovery of highly inbred Leghorn and Fayoumi chicken breeds using pooled whole genome resequencing data reveals insights into phenotype differences

    Get PDF
    Background Analyses of sequence variants of two distinct and highly inbred chicken lines allowed characterization of genomic variation that may be associated with phenotypic differences between breeds. These lines were the Leghorn, the major contributing breed to commercial white-egg production lines, and the Fayoumi, representative of an outbred indigenous and robust breed. Unique within- and between-line genetic diversity was used to define the genetic differences of the two breeds through the use of variant discovery and functional annotation. Results Downstream fixation test (F ST ) analysis and subsequent gene ontology (GO) enrichment analysis elucidated major differences between the two lines. The genes with high F STvalues for both breeds were used to identify enriched gene ontology terms. Over-enriched GO annotations were uncovered for functions indicative of breed-related traits of pathogen resistance and reproductive ability for Fayoumi and Leghorn, respectively. Conclusions Variant analysis elucidated GO functions indicative of breed-predominant phenotypes related to genomic variation in the lines, showing a possible link between the genetic variants and breed traits

    Functional and Biogenetical Heterogeneity of the Inner Membrane of Rat-Liver Mitochondria

    Get PDF
    Rat liver mitochondria were fragmented by a combined technique of swelling, shrinking, and sonication. Fragments of inner membrane were separated by density gradient centrifugation. They differed in several respects: electronmicroscopic appearance, phospholipid and cytochrome contents, electrophoretic behaviour of proteins and enzymatic activities. Three types of inner membrane fractions were isolated. The first type is characterized by a high activity of metal chelatase, low activities of succinate-cytochrome c reductase and of glycerolphosphate dehydrogenase, as well as by a high phospholipid content and low contents of cytochromes aa3 and b. The second type displays maximal activities of glycerolphosphate dehydrogenase and metal chelatase, but contains relatively little cytochromes and has low succinate-cytochrome c reductase activity. The third type exhibits highest succinate-cytochrome c reductase activity, a high metal chelatase activity and highest cytochrome contents. However, this fraction was low in both glycerolphosphate dehydrogenase activity and phospholipid content. This fraction was also richest in the following enzyme activities: cytochrome oxidase, oligomycin-sensitive ATPase, proline oxidase, 3-hydroxybutyrate dehydrogenase and rotenone-sensitive NADH-cytochrome c reductase. Amino acid incorporation in vitro and in vivo in the presence of cycloheximide occurs predominantly into inner membrane fractions from the second type. These data suggest that the inner membrane is composed of differently organized parts, and that polypeptides synthesized by mitochondrial ribosomes are integrated into specific parts of the inner membrane
    corecore