Renewal MI Dental Composite Etch and Seal Properties

This study's aim was to assess whether the Renewal MI composite can self-etch enamel, seal sound cavities, and stabilize demineralized dentine. Etching was assessed using scanning electron microscopy (SEM). Cavity sealing was quantified using the ISO-11405 dye microleakage test. Demineralized dentine stabilization was evaluated by visualizing resin tag formation, enzyme activity and mineral precipitation at the adhesion interface. Renewal MI provided a mild etching of sound enamel in comparison with 37% phosphoric acid. It provided a comparable seal of sound cavities to Z250/Scotchbond Universal adhesive and a superior seal to Activa, Fuji IX and Fuji II LC. With demineralized dentine, Renewal MI formed 300-400 µm resin tags covering 63% of the adhesion interface compared with 55 and 39% for Z250/Scotchbond and Activa. Fuji IX and Fuji II LC formed no resin tags. A higher tag percentage correlated with lower surface enzyme activity. Unlike Activa and Fuji II LC, Renewal MI promoted mineral precipitation from simulated body fluid, occluding adjacent dentinal tubules within 6 months. These novel etching and sealing properties may facilitate Renewal MI's application in minimally invasive dentistry

Non-pharmacological interventions for managing dental anxiety in children

This is a protocol for a Cochrane Review (Intervention). The objectives are as follows: This review aims to assess the effectiveness of non-pharmacological interventions for reducing dental anxiety in children

Rare human papillomavirus 16 E6 variants reveal significant oncogenic potential

The aim of this study was to determine whether low prevalence human papillomavirus (HPV) 16 E6 variants differ from high prevalence types in their functional abilities. We evaluated functions relevant to carcinogenesis for the rarely-detected European variants R8Q, R10G and R48W as compared to the commonly detected L83V. Human immortalized keratinocytes (NIKS) stably transduced with the E6 variants were used in most functional assays. Low and high prevalence E6 variants displayed similar abilities in abrogation of growth arrest and inhibition of p53 elevation induced by actinomycin D. Differences were detected in the abilities to dysregulate stratification and differentiation of NIKS in organotypic raft cultures, modulate detachment induced apoptosis (anoikis) and hyperactivate Wnt signaling. No distinctive phenotype could be assigned to include all rare variants. Like L83V, raft cultures derived from variants R10G and R48W similarly induced hyperplasia and aberrantly expressed keratin 5 in the suprabasal compartment with significantly lower expression of keratin 10. Unlike L83V, both variants, and particularly R48W, induced increased levels of anoikis upon suspension in semisolid medium. R8Q induced a unique phenotype characterized by thin organotypic raft cultures, low expression of keratin 10, and high expression of keratins 5 and 14 throughout all raft layers. Interestingly, in a reporter based assay R8Q exhibited a higher ability to augment TCF/β-catenin transcription. The data suggests that differences in E6 variant prevalence in cervical carcinoma may not be related to the carcinogenic potential of the E6 protein

Band gap reduction in GaNSb alloys due to the anion mismatch

The structural and optoelectronic properties in GaNxSb1–x alloys (0<=x<0.02) grown by molecular-beam epitaxy on both GaSb substrates and AlSb buffer layers on GaAs substrates are investigated. High-resolution x-ray diffraction (XRD) and reciprocal space mapping indicate that the GaNxSb1–x epilayers are of high crystalline quality and the alloy composition is found to be independent of substrate, for identical growth conditions. The band gap of the GaNSb alloys is found to decrease with increasing nitrogen content from absorption spectroscopy. Strain-induced band-gap shifts, Moss-Burstein effects, and band renormalization were ruled out by XRD and Hall measurements. The band-gap reduction is solely due to the substitution of dilute amounts of highly electronegative nitrogen for antimony, and is greater than observed in GaNAs with the same N content

Rhenium Complexes Bearing Tridentate and Bidentate Phosphinoamine Ligands in the Production of Biofuel Alcohols via the Guerbet Reaction

We report a variety of rhenium complexes supported by bidentate and tridentate phosphinoamine ligands and their use in the formation of the advanced biofuel isobutanol from methanol and ethanol. Rhenium pincer complexes 1–3 are effective catalysts for this process, with 2 giving isobutanol in 35% yields, with 97% selectivity in the liquid fraction, over 16 h with catalyst loadings as low as 0.07 mol %. However, these catalysts show poorer overall selectivity, with the formation of a significant amount of carboxylate salt solid byproduct also being observed. Production of the active catalyst 1d has been followed by 31P NMR spectroscopy, and the importance of the presence of base and elevated temperatures to catalyst activation has been established. Complexes supported by diphosphine ligands are inactive for Guerbet chemistry; however, complexes supported by bidentate phosphinoamine ligands show greater selectivity for isobutanol formation over carboxylate salts. The novel complex 7 was able to produce isobutanol in 28% yield over 17 h. The importance of the N–H moiety to the catalytic performance has also been established, giving further weight to the hypothesis that these catalysts operate via a cooperative mechanism

Sellar Remodeling after Surgery for Nonfunctioning Pituitary Adenoma: Intercarotid Distance as a Predictor of Recurrence

Introduction  As they grow, pituitary adenoma can remodel the sella turcica and alter anatomical relationships with adjacent structures. The intercarotid distance (ICD) at the level of the sella is a measure of sella width. The purpose of this study was to (1) assess how ICD changes after transsphenoidal surgery and (2) explore whether the extent of ICD change is associated with tumor recurrence. Methods  A retrospective analysis of preoperative and postoperative coronal magnetic resonance imaging (MRI) scans was carried out by two independent assessors on patients who underwent transsphenoidal surgery for nonfunctioning pituitary macroadenomas. Preoperative tumor volume and any change in ICD following surgery were recorded and compared between groups. Logistic regression models of recurrence were generated. Results  In 36 of 42 patients, ICD fell after surgery (mean = 1.8 mm) and six cases were static. At time of follow-up (mean = 77 months), 25 had not required further intervention and 17 had undergone second surgery or radiosurgery. In patients in whom no further intervention has yet been necessary, the postoperative reduction in ICD was significantly smaller than in those who required repeat intervention (1.1 vs. 2.7 mm respectively, p  < 0.01). ICD decrease was weakly correlated with tumor volume ( r  = 0.35). ICD decrease was a significant predictor of recurrence (odds ratio [OR] = 3.15; 95% confidence interval [CI]: 1.44–6.87), largely independent of tumor volume. Conclusion  For most patients, ICD falls following surgical excision of a nonfunctioning pituitary macroadenoma. A greater reduction in ICD postsurgery appears to predict recurrence. Change in ICD shows promise as a radiographic tool for prognosticating clinical course after surgery

Application of DEN refinement and automated model building to a difficult case of molecular-replacement phasing: the structure of a putative succinyl-diaminopimelate desuccinylase from Corynebacterium glutamicum.

Phasing by molecular replacement remains difficult for targets that are far from the search model or in situations where the crystal diffracts only weakly or to low resolution. Here, the process of determining and refining the structure of Cgl1109, a putative succinyl-diaminopimelate desuccinylase from Corynebacterium glutamicum, at ∼3 Å resolution is described using a combination of homology modeling with MODELLER, molecular-replacement phasing with Phaser, deformable elastic network (DEN) refinement and automated model building using AutoBuild in a semi-automated fashion, followed by final refinement cycles with phenix.refine and Coot. This difficult molecular-replacement case illustrates the power of including DEN restraints derived from a starting model to guide the movements of the model during refinement. The resulting improved model phases provide better starting points for automated model building and produce more significant difference peaks in anomalous difference Fourier maps to locate anomalous scatterers than does standard refinement. This example also illustrates a current limitation of automated procedures that require manual adjustment of local sequence misalignments between the homology model and the target sequence

Ares I-X Range Safety Simulation Verification and Analysis Independent Validation and Verification

NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. To obtain approval for launch, a range safety final flight data package was generated to meet the data requirements defined in the Air Force Space Command Manual 91-710 Volume 2. The delivery included products such as a nominal trajectory, trajectory envelopes, stage disposal data and footprints, and a malfunction turn analysis. The Air Force s 45th Space Wing uses these products to ensure public and launch area safety. Due to the criticality of these data, an independent validation and verification effort was undertaken to ensure data quality and adherence to requirements. As a result, the product package was delivered with the confidence that independent organizations using separate simulation software generated data to meet the range requirements and yielded consistent results. This document captures Ares I-X final flight data package verification and validation analysis, including the methodology used to validate and verify simulation inputs, execution, and results and presents lessons learned during the proces

development and optimisation of a face-to-face behavioural intervention component

After weight loss, most individuals regain lost weight. Interventions to support the transition from successful loss to weight loss maintenance (WLM), regardless of the method of prior weight loss, are needed. The aims of this study were to (1) develop a face-to-face behavioural intervention session to support overweight and obese individuals who have recently lost a clinically significant amount of weight in the transition to WLM; (2) to assess the single-session intervention for acceptability and feasibility prior to its use in a larger, 12-month, multi-component trial; and (3) to optimise the intervention session for future use based on participant feedback. Participants with a Body Mass Index of ≥25 kg/m2 prior to a ≥5% weight loss in the previous 12 months were recruited via the local government authority and community-based advertisements. Each attended the one-hour session with a trained facilitator, which focused on setting maintenance-relevant weight, eating, and physical activity goals. Semi-structured interviews were carried out immediately post-session to obtain feedback on the acceptability of this intervention component. Data were used to generate recommendations for changes to the session, which were discussed by the team, and used to optimise the session. Seventeen participants (13 female; median WL = 13%) were recruited. All participants evaluated the intervention session positively; 11 participants suggested improvements including reducing information provision in favour of greater focus on identifying and coping with barriers, and the inclusion of practical examples. The systematic refinement and optimisation process resulted in an acceptable and feasible face-to-face behavioural intervention session (described here), which will be tested as part of a multi-component intervention. We anticipate the session could be used to supplement existing support including online services, and has the potential to benefit people who have lost a clinically significant amount of weight to achieve WLM over the long term